Search Our Custom Fasteners

Wednesday, April 13, 2016

Special 3 Wave Spring Washer

Special/custom 3 wave spring washer steel - Engineered Source is a distributor and supplier of special wave washers serving Santa Ana, Orange County, Los Angeles, San Diego, Inland Empire, California, Continental United States, Mexico

This is a special 3 wave steel spring washer that we have been supplying our customer for a number of years.  We stock an approximately 12-18 month supply of the part and release it throughout the year based on our customer's usage.  We can supply custom spring washers in a countless array of materials, sizes, and dimensional parameters.

Thursday, April 7, 2016

Special 6-32 X 3-1/2 Slotted Round Machine Screw in Plain 1022 Carbon Steel

Special/custom 6-32 X 3-1/2 Slotted Round Machine Screw in 1022 Silicon Killed Fine Grain Steel Material - Engineered Source as the supplier and distributor serving Santa Ana, Orange County, Los Angeles, San Diego, Inland Empire, California, United States, and Mexico

We supply this part to our aerospace/defense customer after having it cadmium or zinc plated, typically at quantities between 1,000 and 3,000 pieces.  This part is made in the USA and is provided with full certs, including DFAR, material, FAIR, and Certificates of Conformance.  Lead time is typically 6-8 weeks from order and if needed an updated drawing can be provided for final approval prior to production start.

Special SAE 863 Bronze Sleeve Bearing

Special/Custom SAE 863 Bronze Sleeve Bearing 3/16 X 5/16 X 1/4 - Enginereed Source as the supplier and distributor serving Santa Ana, Orange County, Los Angeles, San Diego, Inland Empire, California, United States, Mexico

We provide our customer base a number of different bearings and sleeve type bearings like this SAE 863 part.  This part was supplied at a quantity of just over 5,000 pieces and the lead time was approximately 6 weeks.  SAE 863 is a powdered Iron-Copper material that boasts greater strength due to its iron content.

Wednesday, April 6, 2016

Special Vented 8-32 X 5/8 Socket Head Cap Screw in Invar 36 Material

8-32 X 1/4 socket head cap screw, vented, in Invar 36 material - made special/custom to print with Engineered Source as the supplier and distributor.  Engineered Source services Santa Ana, Orange County, Los Angeles, San Diego, Inland Empire, Socal, California, and the remainder of United States as well as Mexico

This part is very much like the 6-32 X 1/4 vented socket cap screw shown in an earlier blog and this special invar part was also purchased by a university student at a relatively small quantity.  In quantities of 20-100 pieces the lead time for special socket cap screws with these parameters is approximately 1-2 weeks, with rush service available upon request.

Friday, March 25, 2016

Chrome Plated 316 Stainless Steel 6-18 X 3/4 Phillips Flat Sheet Metal Screw

Chrome Plated Phillips Flat Sheet Metal Screws in 316 stainless steel - Engineered Source is a supplier of chrome plated 316 stainless steel screws and fasteners, serving Santa Ana, Orange County, Los Angeles, San Diego, Inland Empire, Southern California, United States, Mexico

Engineered Source offers a variety of secondary services for both standard and special fasteners, with additional detail available at http://www.engineeredsource.com/customized-special-fastener-supplier-orange-county-ca-s/108.htm.  Chrome plating is typically done either in barrel form for larger quantities or by individually hanging the fasteners, which is significantly more expensive.  For parts that serve a critical aesthetic function, like screws on musical instruments, individual plating is preferred to limit the imperfections.  Barrel based chrome plating however is typically the ideal scenario for applications where cost and corrosion resistance are relatively more important than the aesthetics of the parts.  These chrome plated 316 stainless steel (easy to distinguish with the stamped dot at the flat head to designate the 316) sheet metal screws were barrel plated at approximately 30,000 pieces.  We stock these parts for our customer on a blanket purchase basis and release as needed throughout the year.

Special Machined Coupling Nut Made to Print In Aluminum Material

special custom machined coupling nut for aerospace made using aluminum material - engineered source is a supplier and distributor of special & custom coupling hex nuts in aluminum, stainless steel, etc - serving Santa Ana, Orange County, Inland Empire, San Diego, California, USA, Mexico

This is a special 6535AX coupling nut made for our aerospace customer to print using aluminum material.  Physical and chemical material certs are provided with the parts and they are produced domestically within the United States.  We stock this recurring part for our customer and release the parts as needed throughout the year.

Friday, March 11, 2016

Molded Black Rubber Bumper With Washer

special and custom molded rubber bumper parts to print - Engineered Source is a supplier and distributor of custom rubber bumper parts, covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, Southern California, and Continental United States

Engineered Source supplies its existing customer base a number of special rubber parts, and often specific rubber material sheets as well.  Regardless of the type of rubber material you require, chances are we can provide the special part you need for your application.  Please email us a sample or a print and we will work on providing the ideal solution for your needs.

Special Slotted Flat Head Machine Screw in Copper 110 Material

Special/Custom Slotted Flat Head Machine Screw in Copper 110 Material - Engineered Source is a supplier and distributor of special fasteners like this special clotted machine screw serving Santa Ana, Orange County, Los Angeles, San Diego, Inland Empire, and United States as a whole

This is a small 4-40 X 5/16 special copper machine screw supplied at just 100 pieces.  Small quantity special fastener orders like this are a daily routine for us and we can supply specials to print in just about any material.  Copper 110 material was used on this specific part and we were able to deliver the parts to our customer within 10 business days from order.

Wednesday, March 2, 2016

Special "Shim" Washers In 302 Stainless Steel

special "shim" washer in 302 stainless steel - engineered source is a premier supplier and distributor of stainless steel special washers in santa ana, orange county, los angeles, inland empire, san diego, southern california

Engineered Source Inc supplies its customer base an almost endless variety of special washers, from 302 & 304 stainless steel material to Teflon and everything in between.  This specific "shim" washer is made using 302 stainless steel and has dimensions of 2.198 ID, 2.647 OD, .018 TH with tolerance of +/- .010 on the OD and ID and +/- .001 for the thickness.  Special washers, like most other special fastener parts we supply, are typically ordered on a blanket purchase order basis with scheduled or as-needed releases.

Tuesday, February 16, 2016

M3 X 6MM Hex Standoff In Nylon Material

M3 X 6MM hex standoff & similar electronics nylon fasteners distributed/supplied by Engineered Source - covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, Southern California

Electronics hardware like this M3 X 6MM nylon standoff are one of our long time specialties and we supply virtually every variation to our customer base.  Most of the time these nylon standoff parts are needed in significant enough quantities to use our overseas sources but domestic sources are also available when specifically requested.  Like all fasteners we supply, stock and release arrangements are commonly used for these nylon fasteners.