Search Our Custom Fasteners

Monday, June 13, 2016

Special Metric Hex Head Fully Threaded Cap Screw in 410 Stainless Steel

Special/custom metric 410 stainless steel hex head cap screw/bolt - engineered source is a supplier and distributor of special & custom 410 stainless steel hex head screws/bolts, both metric and inch - covering Santa Ana, Orange County, Los Angeles, San Diego, Inland Empire, San Diego, California, United States, Mexico

This is an M5 X 0.8 X 60MM hex head cap screw that is fully threaded per customer's specifications and manufactured in the United States using 410 stainless steel.  Parts are then heat treated for required hardness.  A similar part is supplied for the same customer at M6 diameter, which will be shown as a separate entry.  Both parts are supplied on a one-time release basis at 5,000 pieces each.

Thursday, June 9, 2016

Special Flat Washer in Steel Zinc

Special/custom flat washer in steel zinc - Engineered Source is a supplier and distributor of special washers in steel and stainless steel material - covering Santa Ana, Orange County, Los Angeles, San Diego, Inland Empire, California, United States, and Mexico

This is a special steel washer made to ID of 1.504, OD of 2.187, and TH of .062 with standard tolerances in place per customer's specifications.  We supply hundreds of special washers in a variety of materials and parameters, both on an as-released blanket purchase order basis and single order release basis.  Custom washers like this typically have a lead time of 6-8 weeks from a PO.

Wednesday, June 1, 2016

Special Captive Screw With O-Ring

Special/custom stainless steel phillips pan captive screw with o-rings - Engineered Source is a supplier and distributor of special/custom captive screws with o-rings in stainless steel and steel zinc - covering Santa Ana, Orange County, San Diego, Los Angeles, Inland Empire, California, United States, Mexico

This is a special captive screw measuring 10-32 X 2-3/8 manufactured in the United States using 18-8 stainless steel material.  It has a standard pan head with a phillips drive and is partially threaded to act as a captive/panel screw.  An o-ring is incorporated on each screw to our customer's specifications.  We have carried this part on a blanket as-released purchase order basis for the same customer for over five years.

Tuesday, May 31, 2016

Special DIN965 Metric Phil Flat Machine Screw

Special/Custom DIN965 M3-0.5 X 9MM Phillips Flat Machine Screw in steel zinc plated material - Engineered Source is a supplier of special/custom Din965 metric phillips flat machine screws in zinc steel - serving Santa Ana, Orange County, Los Angeles, San Diego, Inland Empire, California, United States, and Mexico

This is a special phillips flat DIN965 machine screw measuring M3 X 0.5 X 9MM and manufactured in the USA using steel with zinc plating finish.  These parts we typically supply to our customer with a production run for each order at the quantity requested, typically around 3,000 pieces.  While a variety of M3 X 0.5 DIN965 screws are available as standards, the 9MM length is often an impossible item to find off the shelf and requires production as a special.

Friday, May 20, 2016

Special 1/16 X 1/4 Dowel Pin in 420 Stainless Steel

special/custom small quantity dowel pin from 420SS for an aerospace customer - Engineered Source Inc is a supplier and distributor of special/custom dowel pins in stainless steel for aerospace/defense customers, serving Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, United States

This is a special dowel pin made for our aerospace customer using 420 stainless steel material at just 100 pieces.  After production the pins were separately passivated using a NADCAP certified facility using a process of passivation with descaling and a 24 hour water immersion test that is typically recommended for 400 series stainless steel materials.

Friday, May 13, 2016

Special Grade 8 Socket Cap Screw With Black Oxide & Oil Finish

Special/custom hex socket head cap screw in grade 8 steel with black oxide and oil finish - Engineered Source is a supplier and distributor of special and custom socket head cap screws/bolts in grade 8 steel with black oxide finish - covering Santa Ana, Orange County, Los Angeles, San Diego, Inland Empire, California, United States, and Mexico

This is a special 10-32 X .590 socket head cap screw made in the USA using Grade 8 steel with black oxide finish.  It is a part we have supplied for many years on a blanket as-released purchase order basis, typically holding 6-12 months of supply at all times to allow for maximum flexibility to our customer.

Tuesday, May 10, 2016

Special 8-18 Partially Threaded Machine Screw With Tapered Point

Special/custom 8-18 X 1.1" phillips pan head machine screw to print in 18-8 stainless steel - Engineered Source is a supplier and distributor of special machine screws in stainless steel - covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, United States, Mexico

This is a special partially threaded machine screw supplied to our customer at 30,000 pieces.  The part is made using 18-8 stainless steel and is slightly tapered at the point to allow for faster use in the customer's application.  The head is a slightly off-standard pan head with a phillips drive.  Parts are made in the United States.

Friday, May 6, 2016

Special Slotted Fillister Head Machine Screw In 18-8 Stainless Steel

special slotted fillister machine screw in stainless steel - Engineered Source is a supplier and distributor of stainless special/custom fillister head machine screws - serving Santa Ana, Orange County, Los Angeles, San Diego, Inland Empire, California, United States, Mexico

This is a special 2-56 X .625 inch slotted fillister machine screw in 18-8 stainless steel material, made in the USA at a relatively small quantity batch of 500 pieces.  Parts are provided to our aerospace customer with a AS9102 compliant First Article Inspection Report (FAIR) and a number of required certificates.

Friday, April 29, 2016

Special Dowel Pin to Print In 303 Stainless Steel

Special/custom 3/16 X 7/16 dowel pin in 303 stainless steel - Engineered Source is a supplier and distributor of special dowel pins in stainless steel - serving Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, United States, Mexico

We supply a wide range of special pins in materials varying from PVDF to 303 stainless steel like these special to print 3/16 X 7/16 dowel pins.  This pin has been provided to our customer using the same trusted factory for over five years.

Wednesday, April 27, 2016

Special Leveling Threaded Feet With A Rubber Base

special/custom leveling base screw/leg in steel zinc with rubber base - engineered source is a supplier and distributor of special and custom levelers, serving Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, United States

We supply our customers with a number of special to print and standard off the shelf levelers like this 1/4-20 threaded part measuring 1-1/2 inches in length and a 2-1/8 inch base diameter.  These levelers can be provided with a number of different materials, finishes, and specific options catering to the customer's project needs.  They are made in the USA and are currently supplied to our customer based on a blanket purchase basis.