Search Our Custom Fasteners

Tuesday, October 4, 2016

Special Dimensional MS16218-9 Slotted Flat Machine Screw

special/custom dimensional MS16218-9 slotted flat machine screw in c65500 silicon bronze material - engineered source is a supplier and distributor of custom/special silicon bronze milspec machine screws - covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, United States, Mexico

Customers often ask us to supply them dimensional equivalents of MS and AN milspec parts with a varying degree of documentation and testing requirements.  This is a small quantity (1,000 pieces) batch of special made dimensional equivalent of MS16218-9 slotted flat machine screws, made in the USA using C65500 ASTM B 98 silicon bronze material - it measures 2-56 X 3/16".

Tuesday, September 27, 2016

Special Threaded Studs in 316 Stainless Steel


Special threaded rod products like these custom cut 3/4 X 9 threaded studs in 316 stainless steel are a daily routine for us.  We supply our diverse customer base a large variety of custom made u bolts, custom made square u bolts, bent threaded anchor bolts, etc.  A number of different raw material choices are at your disposal and countless more specialized materials available upon request at slightly longer lead times.

Friday, September 16, 2016

Custom Molded Glass Filled Nylon T-Pin

Special/custom molded glass filled nylon plastic t-pin fastener/hardware - Engineered Source is a supplier of special and custom molded plastic components - covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, United States, and Mexico

We supply our diverse customer base a variety of special molded and injection molded parts like this custom nylon molded part that we supply in quantities of 2,000-5,000 pieces, on a annual blanket order basis.  This specific molded part is made using Nylon 6/6 material that is 33% glass filled to allow for optimal break points our customer requires.

Thursday, September 1, 2016

AN126288 Straight Stud Special Made for Aerospace Application

Special AN126288 straight threaded stud in Steel AMS 6322 material with AMS 2400 Cadmium plating, heat treated to HRC 26-32 - Engineered Source is a supplier and distributor of special/custom aerospace parts/hardware - covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, United States, and Mexico

This is a dual threaded straight stud made to AN126288 specifications, with one side at 5/16-24 thread pitch and the other at 5/16-18 non standard pitch.  We supplied this part to our aerospace customer at approximately 300 pieces per order.  AMS 6322 steel was used as the material, heat treated to 26-32 rockwell hardness and Cadmium plated to AMS 2400 specification.  Material, heat treat, and plating certs were provided with the parts.

Monday, August 29, 2016

Custom 302 Stainless Steel Narrow Washer

Custom/special stainless steel flat washer (narrow) - Engineered Source is a supplier and distributor of special and custom flat washers - covering Santa Ana, Orange County, Los Angeles, Inland Empire, California, United States

This washer is a very similar part to the other narrow 304 stainless steel flat washer posted some days ago.  It is made in the USA using 302 stainless steel in quantities of 1,000-1,500 pieces at a time and carries an approximate 4 week lead time.  The dimensions are as follows: ID of .7180, OD of .9680, and Thickness of .0630.

Friday, August 26, 2016

Special Grade 5 Hex Head Shoulder Bolt

Special custom grade 5 hex head shoulder bolt - Engineered Source is a supplier and distributor of custom and special shoulder bolts - covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, United States, Mexico

This is a special grade 5 hex head shoulder bolt made in the USA and finished with commercial zinc with bake and clear chromate sealant.  The bolt measures 5/16-18 X 1-1/4 and is supplier on an annual blanket order basis to our US based customer.

Special Flat Washer in 304 Series Stainless Steel

Custom/special flat 300 stainless steel flat washer - Engineered Source is a supplier and distributor of special/custom flat washers in stainless steel material - covering Santa Ana, Orange County, Los Angeles, Inland Empire, California, United States, and Mexico

We supply our diverse customer base countless special made flat washers, mostly on blanket as-released purchase order basis.  This is a custom 304 stainless steel flat washer made in the USA to an inside diameter of .600, outside diameter of .872, and thickness of .047 inches.

Thursday, August 25, 2016

Special Phillips/Slotted Hex Washer Head Machine Screw

Custom/special phillips slotted hex washer head machine screw in steel with black oxide finish - Engineered Source is a supplier and distributor of custom and special combo drive machine screws - covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, United States, Mexico

This is a part we supply our long time customer on an as-needed basis every two years or so at approximately 40,000 pieces per order.  It is a M4-0.70 X 9.5MM phillips slotted combo drive hex washer head machine screw made using steel material with black oxide and light oil per customer specifications.  Made in the USA this part typically carries a 5-6 week lead time from order.

Wednesday, August 17, 2016

Special U-Bolts In Stainless Steel Material

Custom/Special U-Bolts in stainless steel at 3/8-16 diameter - Engineered Source is a supplier and distributor of custom/special U bolts in steel and stainless steel covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, United States, Mexico

We have been supplying a diverse range of custom U-bolts to the construction, plumbing, and HVAC industry for over 20 years.  This is a custom 3/8 diameter 304 stainless steel U-bolt at 6-3/4 inch inside width, 7-7/8 inch depth and approximately 2-1/2 inches of coarse thread.  Lead time for parts like this varies based on material, size, and quantity but is typically between 3-5 days from order.

Friday, August 12, 2016

Special Thread Cutting Screw With Type 17 Point

custom special combo drive thread cutting type 17 screw in stainless steel - engineered source is a supplier and distributor of custom/special thread cutting screws - serving Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, United States, Mexico

Custom thread rolling and thread cutting screws are the most common types of special parts we supply - this is a custom #10-12 X 1" phillips square combo drive thread cutting screw made in the USA using 302 stainless steel.  A type 17 point is incorporated to our customer's specifications and the parts are run through a black oxide and wax service as a final step.  These parts are stocked and releases on a blanket purchase order basis annually.