Search Our Custom Fasteners

Tuesday, November 1, 2016

Custom 1/2 X 19-1/16 Round Stainless Steel U-bolts

Custom 1/2 X 19-1/16 stainless steel round u-bolts - engineered source is a supplier and distributor of custom and special ubolts, both square and round, in stainless steel - covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, United States, and Mexico

We supplied a small quantity of this custom 1/2 diameter round u bolt to our customer as a one time order and shipment.  These u-bolts have approximately 3 inches of coarse thread on both legs and two 18-8 stainless steel nuts per customer's drawing specifications.  The width between the legs is 4-9/16" and the inside depth is measured at 7-13/16".  Material certs and inspection reports can be provided upon request.

Custom 3/4 X 6" 316 Stainless Steel Threaded Rod Studs

Custom 3/4 X 6" 316 Stainless Steel Threaded Studs - Engineered Source is a supplier and distributor of custom/special 316 stainless threaded rod and studs - covering Santa Ana, Orange County, Los Angeles, San Diego, Inland Empire, California, United States, and Mexico

These are custom 3/4 inch diameter coarse threaded studs supplied to our customer at a small quantity of 40 pieces.  The studs were cut and chamfered on both sides using 12 foot 316 stainless steel threaded rod.  Larger quantities of custom threaded studs can be supplied on a blanket purchase order basis.

Custom 5/16 X 7-1/2 Square Stainless Steel U-Bolt

Custom/special 5/16 coarse thread 304 stainless steel square U bolts - Engineered Source is a supplier and distributor of custom stainless steel square u-bolts - covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, USA, and Mexico

This is a custom square u-bolt we supplied to a customer at 200 pieces.  Parts were manufactured locally in Southern California using 304 stainless steel, with a 5/16 diameter and coarse threaded 2 inch sections on each leg of the u-bolt.  The inside width is 6-1/8 and the inside depth is at 7-1/2 inches.  Material certs were provided with the parts per customer's instructions.

Friday, October 28, 2016

Custom 5/8 X 33 Inch U Bolts In 304 Stainless Steel

custom special stainless steel ubolt supplier and distributor - serving santa ana, orange county, los angeles, inland empire, san diego, california, USA, and Mexico

These are large custom stainless u bolts we supplied to our customer with expediting processing - the inside depth on these parts is 33 inches, with the diameter and thread pitch at 5/8-11.  3.5 inches of thread was incorporated on each side and the inside width was 8-3/5 inches.  This was a small quantity order of just 6 pieces.

Monday, October 24, 2016

Special Phil Pan Machine Screws With Black Oxide Finish and Thread Locking Patch

Special Stainless Steel Phil Pan Machine Screw With Black Oxide & Nylon 11 Patch - Engineered Source is a supplier and distributor of special fasteners like these machine screws with black oxide finish and nylon thread locking patch services - serving Santa Ana, Orange County, Inland Empire, Los Angeles, San Diego, California, USA, and Mexico

We supply countless parts to our diverse customer base that incorporate one or more secondary services and finishes.  This stainless steel 4/40 X 3/16 phil pan machine screw is a good example.  It is made using 18-8 stainless steel and is then run through a Class 2 Black Oxide treatment.  The final step is a nylon 11 thread locking patch application.  We supply these specific machine screws to our customer on a revolving annual blanket purchase order basis.

Friday, October 21, 2016

Custom 6-Lobe Stainless Steel Socket Sheet Metal Screw

custom/special stainless steel sheet metal screws - Engineered Source is a supplier and distributor of custom and special stainless steel sheet metal screws - covering Santa Ana, Orange County, Los Angeles, San Diego, Inland Empire, California, United States, and Mexico

This is unique custom 302 stainless steel #4-24 X .900 socket sheet metal screw.  It incorporates a 6-lobe socket drive and a partial thread with a AB type point.  These special sheet metal screws are supplied at quantities of approximately 2,000 pieces per order and carry a lead time of 6-8 weeks.  They are passivated in the final stage of the manufacturing process and are made in the USA.

Custom 316 Stainless Steel Threaded Studs

Custom/special 316 stainless steel threaded rod studs supplier and distributor - Engineered Source covers Santa Ana, Orange County, Los Angeles, San Diego, Inland Empire, California, United States, and Mexico

This is another 5/8-11 threaded stud made using 316 stainless steel material, at 10" lengths.  Similar to the 6" version discussed in the previous entry these studs were also made with a 1 week lead time.  The quantity was higher however, at 150 pieces total at 10" lengths.  Higher quantities can be set up for annual or 6 month blanket purchase orders as well.

Custom 5/8 X 6 Threaded Studs in 316 Stainless Steel

Custom special 316 stainless steel threaded stud rods - Engineered Source is a supplier and distributor of custom/special 316 stainless steel threaded studs - covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, United States, and Mexico

We supply our customer base a large variety of custom made threaded rod studs made using 316 stainless steel.  This particular 5/8 X 6 threaded stud, with coarse thread, was supplied at a quantity of 100 pieces with a lead time of approximately 1 week.  The threaded studs are cut from 10 foot 316 stainless material and then chamfered on both ends for optimal use.

Wednesday, October 19, 2016

Custom Stainless Steel Shim Washers

Custom/special thin shim washers made using 304 stainless steel material - engineered source is a supplier and distributor of custom/special shim washers using steel and stainless steel material - covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, United States, and Mexico

This is one of the number of shim washers we carry, all of which are made domestically in the USA.  It's dimensions are 2.198 on the inside diameter, 2.647 on the outside diameter, and thickness of .060.  Tolerances on these custom stainless steel shim washer inside and outside dimensions is +/- .010 inches, and +/-.004 on the thickness.  All of the special shim washers we currently carry are supplied to our customers on a annual blanket purchase order basis.

Monday, October 17, 2016

Custom Square Low Carbon Steel Washer

custom special large square washer made to print using Q195 low carbon steel material - engineered source is a supplier and distributor of custom/special import extra large/thick washers - covering Santa Ana, Orange County, Los Angeles, San Diego, Inland Empire, California, United States, and Mexico

This is the third component of the thee piece assembly shown below that we supply our customer on a blanket purchase order basis.  It is manufactured overseas using Q195 low carbon steel material, with plain and light oil finish.  Approximately 1.96" across both directions, this square washer is .600" thick with a tolerance of +/- .06".