Search Our Custom Fasteners

Tuesday, January 17, 2017

Custom Stainless Steel Button Socket Head Screws To Print

custom made 8-32 X 1 button socket head screws/bolts in 302 stainless steel material - engineered source is a supplier and distributor of custom stainless steel button socket screws - covering Orange County, Los Angeles, Inland Empire, San Diego, California, USA, and Mexico

This is a custom made 8-32 X 1" button socket head screw made in the USA using 302HQ material per customer specifications.  We typically supply this part in quantities of 5,000 - 10,000 pieces and lead times vary between 5 and 7 weeks from order.

Custom 3/8-16 X 5" Round U-Bolts in 316 Stainless Steel Material

custom special made round 3/8-16 x 5" 316 stainless steel u-bolts - engineered source is a supplier and distributor of custom made round u-bolts in 316 stainless steel material - covering Orange County, Los Angeles, Inland Empire, San Diego, California, continental USA, and Mexico

This is one of many custom round shaped u-bolts we supply in 316 stainless steel material.  The 3/8-16 threaded sections measure 1-3/4 inches on each leg and the inside width is 2-5/8 inches.  Inside depth is measured at 5 inches.  We typically supply these stainless ubolts at quantities of 100 pieces.

Custom #12 Combo Slotted/Phillips Type B Pan Head Sheet Metal Screws

Custom/special made combo drive type B sheet metal screws in steel zinc material - engineered source is a supplier and distributor of custom made type B sheet metal screws - covering Orange County, Los Angeles, Inland Empire, San Diego, California, USA, and Mexico

We supply these custom type B sheet metal screws to a long time customer on an as-needed blanket purchase order basis.  It is a #12-11 sheet metal screw at 1-1/4 inches in length with a leader point incorporated per customer specifications.  Low carbon steel, case hardened, is used with a commercial zinc and clear chromate finish.  This custom screw is made in the USA with a lead time of 4-6 weeks.  Internal part number BCPLP-1220-B.

Custom 12.9 Alloy Metric Socket Head Cap Screws

Custom M8 X 24MM socket head cap screw made to print using 12.9 alloy steel material - engineered source is a supplier and distributor of custom made 12.9 alloy steel socket head cap screws - covering Orange County, Los Angeles, Inland Empire, San Diego, California, USA, and Mexico

This is a custom M8-1.25M X 24MM socket head cap screw made to print using 12.9 alloy steel with thermal black oxide finish.  4037 alloy steel was used to made these parts in the USA, heat treated to 39-45 HRC.  We supply this part on an annual revolving purchase order basis to a long time customer.  Our internal part number is CLMP8-SC.

Custom 316 Stainless Steel Threaded Weld Studs

custom specialty 316 stainless steel 3/4-10 X 2-1/4 threaded weld studs - engineered source is a supplier and distributor of custom/specialty 316 stainless weld studs - covering Orange County, Los Angeles, Inland Empire, San Diego, California, United States, and Mexico

We supply our customer base a large array of custom made to print weld studs like this 316 stainless steel reduced base weld stud.  It measures 3/4-10 X 2-1/4 and is sold to our customer on an annual as-released blanket purchase order basis.  Our internal part number is CJL-075036-J.

Friday, January 13, 2017

Custom 1/4-20 Fully Threaded Studs In Brass Material

custom cut 1/4-20 threaded rod studs in brass material - engineered source is a supplier and distributor of custom threaded studs and rods in stainless, steel, and brass materials - covering Orange County, Los Angeles, Inland Empire, San Diego, California, USA, and Mexico

These are custom cut and chamfered 1/4-20 threaded studs in brass material that we supply to our long time customer at small 50-100 pieces quantities.  Lead time is typically 1 to 2 weeks depending on the situation, which can be significantly improved with a rush charge if necessary.  Our internal part number is FTS-014048-O.

Thursday, January 12, 2017

Custom 1/2-13 X 8-1/2 Low Head Stainless Steel Socket Head Cap Screw

custom specialty stainless steel socket head cap screws/bolts - engineered source is a supplier of custom made stainless steel socket head cap screws - covering Orange County, Los Angeles, Inland Empire, San Diego, California, USA, and Mexico

This is a custom low profile socket head cap screw we supplied to a customer at just 10 pieces, made in the USA using 303 stainless steel material.  It is a coarse thread 1/2-13 part at 8-1/2 inches in length.  The threaded portion of the screw is at approximately 3 inches in length.  Material certs are available upon request.  Our internal part number is SCS-050136-I.

Custom ASTM-A684 High Carbon Wave Spring Washer

custom/specialty steel wave spring washers - engineered source is a supplier of custom wave spring washers in steel and stainless steel grades of material - covering Orange County, Los Angeles, Inland Empire, San Diego, California, USA, and Mexico

We supply a number of carbon steel 3-wave spring washers like this ASTM-A684 spring washer we provide a customer on an annual blanket purchase order basis.  This washer measures approximately 1.658 on the inside diameter, 2.132 on the outside diameter, and a thickness of approximately .148 inches.

Thursday, January 5, 2017

Custom 1/2 X 7" Round A36 Galvanized Steel U-Bolts

Custom A36 hot dip galvanized steel round u-bolts - engineered source is a supplier and distributor of custom/specialty A36 steel and stainless steel u-bolts - covering Orange County, Los Angeles, Inland Empire, San Diego, California, USA, and Mexico

These custom made u-bolts were manufactured on a rush basis for a customer in dire need, completed within approximately 1 week from order.  A36 steel material was used with hot dip galvanized finish per customer's instructions.  3 inches of coarse thread were incorporated at each leg, with the inside depth at 7" and inside width at 5".

Custom DIN 7991 M14 X 50MM Flat Socket Cap Screw In Class 10.9 Alloy Steel

Custom & specialty DIN 7991 M14 X 50MM socket cap screws/bolts in alloy steel - engineered source is a supplier of custom made flat socket cap screws in alloy steel and stainless steel materials - covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, and continental USA

We supply our customer base countless custom made metric socket screws like this special to print M14 X 1.5M X 50MM flat socket cap screw in 10.9 alloy steel, with plain and light oil finish.  This custom socket screw is supplied in small quantities from 10-50 pieces at a time and is often used in automotive and motorcycle applications.