Search Our Custom Fasteners

Friday, May 5, 2017

Custom Oval Point Set Screws In 18-8 Stainless Steel - 1/2-13 X 1"

Custom Socket Set Screws In 18-8 Stainless Steel - 1/2-13 X 1"

These are custom oval point set screws made domestically in the USA using 18-8 stainless steel material.  While this 1/2-13 X 1" size is fairly common off the shelf in a cup point version, the oval point is a tough find and typically requires a special production run.  We were able to get these set screws completed within 1 week at 100 pieces.  Material certs and our certificate of conformance was available with the parts.

Thursday, May 4, 2017

Phillips Truss Custom Tin Cobalt Plated Machine Screws In 316 Stainless Steel Material

Phillips Truss Custom Tin Cobalt Plated Machine Screws In 316 Stainless Steel Material

These are custom tin cobalt plated machine screws made using type 316 stainless steel, designated by a dot on the head of each screw.  Like the other custom tin cobalt chrome plated screws, these machine screws are manufactured overseas and supplied to our long time customer on a revolving blanket purchase order basis.  The tin cobalt chrome plating is done in a barrel plate format for improved cost efficiency while still producing a very attractive cosmetic finish.  Tin cobalt finish typically provides a slightly duller chrome finish than the traditional hexavalent chromium plating.  All the custom tin cobalt plated parts we supply are electroplated with a bright nickel under-plate for improved longevity and appearance.

Custom Stainless Steel U-bolts In 304 Stainless Steel Material - 3/8 Diameter X 13-7/8 Inside Depth

Custom stainless steel u-bolts in 304 stainless steel material - 3/8 Diameter X 13-7/8 Inside Depth

These are custom stainless steel u-bolts we supplied to our customer in Livingston CA at 800 pieces.  Manufactured domestically using 304 stainless steel material in 5 business days, these 3/8 diameter type 304 stainless steel custom u bolts were supplied with a certificate of conformance and material certs.  Nuts and washers were supplied separately in 18-8 stainless steel material.

Wednesday, May 3, 2017

Custom Tin Cobalt Chrome Plated Screws - 8-19 X 1-1/4 Hi Lo Thread Forming Screws In 316 Stainless Steel

Custom Tin Cobalt Chrome Plated Hi Lo Thread Forming Screws - 8-19 X 1-1/4 In 316 Stainless Steel

We supply our customer base a diverse array of custom chrome, nickel, and zinc plated parts in both barrel and more expensive individual racked forms.  For those that require better corrosion resistance in the presence of chemicals in a RoHS compliant finish we provide custom tin cobalt chrome plated screws that are made using type 316 stainless steel, designated by a dot on the head of each screw.  The parts pictured here are 8-19 X 1-1/4 hi lo thread forming screws.  They are manufactured overseas and supplied to our long time customer on a revolving blanket purchase order basis.  The tin cobalt chrome plating is done in a barrel plate format for improved cost efficiency, while still producing a very attractive cosmetic finish.  Tin cobalt finish typically provides a slightly duller chrome finish than the traditional hexavalent chromium plating.  All the custom tin cobalt plated parts we supply are electroplated with a bright nickel under-plate for improved longevity and appearance.

1/2-13 X 5-7/8 Custom Round Galvanized U-bolts - With Expedited Service


These 1/2 diameter custom round galvanized u-bolts are one of three sizes we supply our customer in Raleigh NC.  They are made domestically using A307 steel material with a hot dip galvanized finish at 63 pieces.  Our customer was in urgent need and we were able to get these custom u-bolts produced in just 3 days together with the other two sizes.  The inside length measures 5-7/8 while the inside width was set at 3 inches for a pipe radius of 1-1/2 inches.  Two inches of 1/2-13 thread was incorporated on each leg.

Tuesday, May 2, 2017

Custom Drilled Socket Head Cap Screws In 17-4 PH, AMS 5643 Material

Custom Drilled Socket Head Cap Screws In 17-4 PH, AMS 5643 Material

These are custom drilled socket head cap screws we supplied our customer that specializes in aerospace parts repair.  They are made domestically in the USA using 17-4 PH/AMS 5643 material with AMS 2759/3, H1100 (30-37 Rc) heat treat, heavy medium sand blast, and finally passivation.  The socket head is drilled in four places at 60 degrees between each pair, using a #56 drill bit at .0465" diameter.  The length is set at .635-.615 inches and the 8-32 UNJC-3A threaded section is to be maintained at .510 to .490 inches.

Wednesday, April 26, 2017

Custom Stainless Steel Washers - 304 Stainless Steel Material

Custom Stainless Steel Washers - 304 Stainless Steel Material

These flat custom stainless steel washers are supplied to our long time customer on a revolving blanket purchase order basis.  They are manufactured domestically using 304 stainless steel material and measure .047 +/- .0030" on the thickness, .8720 +/-.0050" on the outside diameter, and .600 +/- .0050" on the inside diameter.  We are extremely competitive on both domestic and import custom flat washers.

1/2-13 X 7-3/4 Custom Round Galvanized U Bolts - Rush Order


These 1/2 diameter custom round galvanized u bolts are one of three sizes we supply our customer in Raleigh NC.  They are made domestically using A307 steel material with a hot dip galvanized finish at just 12 pieces.  Our customer was in urgent need and we were able to get these custom u bolts produced in just 3 days together with the other two sizes.  The inside length measures 7-3/4 while the inside width was set at 5-3/4 for a pipe radius of 2-7/8 inches.  Two inches of 1/2-13 thread was incorporated on each leg.

Wednesday, April 19, 2017

Custom Rubber Vibration Isolation Mounts With Steel Zinc Pin - 10-24 Thread

Custom Rubber Vibration Isolator Mounts With Steel Zinc Pin - 10-24 Thread

These are 10-24 thread version of custom rubber vibration isolation mounts we supply our customer base.  This specific part we supply on a revolving blanket purchase order basis.  The vibration isolation mounts are manufactured domestically in the USA and the initial lead time for first shipment is typically at 45-60 days from order confirmation.

5/8-11 Custom Galvanized Round U Bolts in A36 Steel Material - 5/8 X 10-1/2 Inside Depth

5/8-11 Custom Galvanized Round U Bolts in A36 Steel Material - 5/8 X 10-1/2 Inside Depth

These are custom galvanized round u bolts we supplied a customer in Belleville, New Jersey at just 12 pieces.  A36 material was used with galvanized finish.  Four galvanized hex nuts, two flat washers, and two split lock washers were included with each custom u bolt.  5/8-11 thread was incorporated at 5 inches in length on each leg and the inside width was 8-1/2 inches.  Inside depth was at 10-1/2 inches.  Material certs were provided with the parts per customer's specifications.