Search Our Custom Fasteners

Wednesday, January 5, 2022

Custom 17-4PH Precision Dowel Pins With Spherical Points

 

Custom 17-4PH Precision Dowel Pins With Spherical Points
We supplied our customer that manufactures fire pump equipment with these custom 17-4ph precision dowel pins using 100% domestic production with DFARS compliant raw material and full certs - material certs, heat treat certs, and a certificate of conformance.  The pins were produced to a diameter of .1249-.1251" and overall length of .670-.675" with equal spherical radii on both sides.  Parts went through heat treatment to achieve the Rc36 hardness minimum requirement.  

Friday, December 3, 2021

Custom Tapered Grade 5 Socket Head Screws - 10-32 Thread

 

Custom Tapered Grade 5 Socket Head Screws - 10-32 Thread
We had these custom tapered grade 5 socket head screws produced for our sports product manufacturing customer with black oxide finish.  10-32 2A thread was rolled at a length of .36 +/- .03" and the head height was set to .14".  Head diameter was designed for .286" +/- .01" and a 1/8" hex socket drive was cold formed.  Our original production batch was sadly lost in transit with Fedex but we were able to push through to get replacement parts manufactured and delivered within 4 weeks to avoid a line shutdown with our customer.

Large Custom Aluminum Standoffs

 

Large Custom Aluminum Standoffs
We supplied our automotive customer slightly over 1,000 pieces of these large custom aluminum standoffs using 6061 aluminum material with plain finish.  The diameter was .75" and we ran two separate lengths: 4.75" and 5.125".  The female/female thread on both lengths was 1/4-20 with minimum thread depth of .50".  No PPAPs were required for these specific parts and only material certs and a certificate of conformance was available.

Thursday, November 18, 2021

Custom Shoulder Bolts For Gun Manufacturer - .185 X .500 Black Oxide

 

Custom Shoulder Bolts For Gun Manufacturer - .185 X .500 Black Oxide
We had approximately 120,000 pieces of these custom shoulder bolts manufactured domestically in the USA for our gun manufacturing customer.  The shoulder measured .185 X 1/2 and 8-32 thread was rolled.  To save on cost we incorporated a convex relief underneath the head in leu of a machined relief, allowing us to complete the entire head portion with cold heading.  The shoulder was centerless ground to a +/-.001 diameter tolerance and we also made sure to meet the .127/.125 across flats requirement on the 1/8 hex socket drive, which was a critical feature for optimal key engagement.  Full certs were provided with the parts.

Thursday, November 11, 2021

Custom Large Metric 12.9 Socket Head Bolts - M90 X 495MM

 

Custom Large Metric 12.9 Socket Head Bolts - M90 Thread


These are custom large metric class 12.9 socket head bolts manufactured domestically for our utilities customer at 92 pieces.  M90 X 4 thread was incorporated at thread length of 120MM.  The shoulder dimeter was set to 84.3MM at a length of 290MM.  

Thursday, October 28, 2021

Custom 6-Lobe (Torx Alternative) Shoulder Screws in 416 Stainless Steel

 

Custom 6-Lobe (Torx Alternative) Shoulder Screws in Stainless Steel
We had these custom 6-lobe shoulder screws manufactured in 416 stainless steel in the USA for our electronics customer.  DFARS compliant material was used and the parts were heat treated to achieve 26-32 RC.  The 6-lobe drive (T10 size) was made using a combination of broaching and punch, allowing us to bypass cold forming that carries a much longer lead time in our current conditions.  The shoulder measures .13" X .500" in length and the threaded portion is #4-40 with a minimal undercut.  Full certs were included with the parts per our customers requirements.

Wednesday, October 20, 2021

Custom Oval Point Set Screws - Metric

 

Custom Oval Point Set Screws - Metric

We had 18,000 pieces of these metric custom oval point set screws manufactured for our renewable energy customer in the United Kingdom.  304 stainless steel material was used and all production was done domestically in the USA.  Overall length was set to .384-.404 inches and the oval point was done with a .120 radius.  4MM x 0.7 thread was cut with 6g thread fit and a .0795-.0805" hex socket drive was broached.  Lead time for production was approximately 10 weeks.

Thursday, September 23, 2021

Custom Injection Molded Plastic Spacers For Construction

 

Custom Injection Molded Plastic Spacers For Construction


We supply our construction customer hundreds of thousands of these custom injection molded plastic spacers in a variety of sizes and colors.  Recycled material is used for both the grey and black version shown here and both have a width of 15MM but all over dimensions vary.  The larger grey spacer has an ID of 18.4MM and OD of 52.7MM while the black spacer has an ID of 11.125MM and OD of 48.72MM.  Both parts are supplied through multiple releases from 12 month blanket purchase agreements established with our customer.

Wednesday, September 22, 2021

Custom Metric 316 Stainless Shoulder Bolts

 

Custom Metric 316 Stainless Shoulder Bolts
We had 24,000 pieces of these custom metric 316 stainless shoulder bolts manufactured for our design and construction customer.  The shoulder measured 4MM by 3MM and M3 X 0.5MM thread was incorporated at 5MM in length, including the relief shoulder transition.  Head diameter was at 6MM and a 2MM hex socket drive was cold formed.  

Monday, September 20, 2021

Custom Cold Headed Screws With Black Nitride Finish

 

Custom Cold Headed Screws With Black Nitride Finish
We get these custom cold headed screws with black nitride finish manufactured 100% domestically for our gun manufacturing customer using 302 stainless steel material.  1/4-28 partial thread is rolled to .75" in length and overall length is set to 1.695".  Black nitride finish was added at 980 to 1050 degrees and effective case thickness of .0005 to .0020".  Full certs were provided with the parts and we release through multiple shipments per an annual Blanket Purchase Agreement we have with our customer.