Search Our Custom Fasteners

Monday, September 12, 2022

Custom Precision Machined A286 Stainless Sleeve

Custom Precision Machined A286 Stainless Sleeve
These custom precision machined A286 stainless steel sleeve components are manufactured domestically for an aerospace application.  Overall length is 1.5" and the sleeve incorporates 1/2-20 2A male thread and 5/16-24 2B female thread at a depth of .512".  A number of precision shoulder steps are designed into the exterior and interior of the components.  FAIR and full certs are made available with the production per customer requirements and initial fit and function test parts were manufactured using 18-8 stainless steel material. 

Monday, August 15, 2022

Custom Low Profile Serrated Flange Nuts With Dacromet Finish

 

Custom Low Profile Serrated Flange Nuts With Dacromet Finish
We had tens of thousands of these custom low profile serrated flange nuts manufactured for our construction customer using Grade 5 steel material with Dacromet zinc flake finish.  1"-8 thread was tapped with 2B thread fit prior to plating and the low profile height was set to .437" max.  Flange diameter was set to 1.46-1.50", which is to standard 1" diameter flange nut specifications.  Full certs were provided with the parts, including 3rd party testing results for proof load, tensile strength, core hardness, and raw material composition.

Friday, July 29, 2022

Custom 316 Stainless Double Thread Studs - Left Hand & Right Hand

Custom 316 Stainless Double Thread Studs - Left Hand & Right Hand

 These custom 316 double thread studs were manufactured domestically using 316 stainless steel material, with a combination of 1/4-28 right hand thread, 1/4-28 left hand thread, 3/8-24 right hand thread, and 10-32 right hand thread with specific tight tolerance machined shoulders specified for each part.  Material certs and certificate of conformance were provided with the parts and the thread was cut rather than rolled for these parts to allow a quicker turnaround.

Thursday, July 28, 2022

Custom 18-8 Stainless Steel Self Drilling Screws - #3 Point

 

Custom 18-8 Stainless Steel Self Drilling Screws - #3 Point
We had slightly over 150,000 pieces of these custom 18-8 stainless steel self drilling screws manufactured for our construction customer.  The drill screws measured 1/4 X 1-1/2 with an undercut flat head and a #3 drill point.  Most off-the-shelf versions are either available in 410 stainless steel or carbon steel material while our customer specifically needed 18-8 stainless steel composition.  Full certs were available with the parts.

Wednesday, July 20, 2022

Custom Precision Drilled Hex Nuts - 5-40 Thread

 

Custom Precision Drilled Hex Nuts - 5-40 Thread

These custom precision drilled hex nuts were manufactured domestically in the USA using DFARS compliant 303 stainless steel material with NADCAP certified passivation per AMS QQ-P-35.  Internal 5-40 2B thread fit was incorporated and two corners drilled at a .026 +/- .005" diameter.  Outside dimensions are 7/32" across the flats and .244" across corners.  Full paperwork was provided with the parts.

Monday, July 18, 2022

Custom 17-4 Stainless Steel Shoulder Screws

 

Custom 17-4 Stainless Steel Shoulder Screws
These custom 17-4 stainless steel shoulder screws were manufactured using DFARS compliant material for our defense customer, with MIL-DTL-13924D black oxide finish and heat treat to condition 1025.  M3 X 0.50 thread was incorporated at a length of 4.06MM and the shoulder measured 3MM in diameter by 24.5MM.  The head incorporated an aggressive diamond knurl and a broached 6-lobe drive.  Full certs with a FAIR were provided with the parts.

Monday, July 11, 2022

Custom Class 10.9 Socket Head Bolts - #6-48 Thread

 

Custom Class 10.9 Socket Head Bolts - #6-48 Thread
These custom class 10.9 socket head bolts were manufactured for our gun accessory manufacturing customer with commercial black oxide finish.  The rolled #6-48 thread length was set to 3.5MM +/-0.3MM and the head height to 2.28MM +/-0.2MM.  Head diameter measured at 5.05MM +/-0.12MM with a cold formed 2.38-2.41MM hex socket drive.  Full certs were available with the parts.  

Thursday, July 7, 2022

Domestic Custom Sharp Point Wood Screws - Hex Washer Head

 

Domestic Custom Sharp Point Wood Screws - Hex Washer Head
These custom sharp point wood screws were manufactured domestically using case hardened steel material with zinc bake and yellow finish.  A high hex washer head was incorporated without serrations and full #12-11 thread at 1-3/4" in length under the head.  A narrow angle was incorporated for the point that together with a type 17 feature created an extra sharp point to allow for automated feeder systems in our customer's application.  Full certs were available with the parts and a Blanket PO Arrangement was used to spread out the usage over a 12 month period.

Monday, June 6, 2022

Custom Hex Flange Bolts - Grade 5 Zinc Plated

 

Custom Hex Flange Bolts - Grade 5 Zinc Plated
We had slightly over 100,000 pieces of these serrated custom hex flange bolts manufactured for our construction customer to their drawing specifications and tolerances.  They were manufactured per SAE J429 Grade 5 requirements with Zinc Clear finish per ASTM B633.  Flange OD was set to .68" and across the flats dimension to .489-.500".  The screws were fully threaded with 5/16-18 2a thread at 2-1/2" in length.  Full certs were provided including 3rd party testing for proof load, hardness, and chemical composition requirements.

Wednesday, May 18, 2022

Custom Tapered Dowel Pins In 303 Stainless Steel

 

Custom Tapered Dowel Pins In 303 Stainless Steel
We had 50,000 pieces of these custom tapered dowel pins manufactured using 303 stainless steel material for our automotive component manufacturing customer.  Overall length was set to 12.56mm +/- 0.3mm and the diameter measured 4mm +.05mm/-.10mm.  The tapered point was machined to a 54 +/- degree angle.  Full certs were provided with the parts per our customer requirements.