Custom Unslotted HWH 10/24 X 5.45 Thread Forming Screw in Stainless Steel

Engineered Source has now been providing this special unslotted hex washer head taptite thread forming screw for many years.  Domestically manufactured to print, this custom part measures 10/24 X 5.45 and is made using 302 stainless steel, with stain and wax as the final secondary service to get the parts ship ready.  

Special Niche Nipple Repair Plug

Easily one of the more odd specials we have worked on for a customer, this is the niche nipple repair plug made to a print provided by our long time customer.  Each part is machined individually, making it a fairly expensive item to produce and to tool up for.  Smaller quantities of this type of special part are therefore not financially feasible for most applications.

Modified Truss Self Tapping Special Screw to Print

Some years ago our customer approached us with the task of creating this self piercing screw for a specialized assembly application.  It has since become a consistent item we carry to ensure adequate supply for their need at all times.  The part is a modified truss head self tapping type A screw, with a phillips drive.  Measuring 9-9 X 1-5/8 in length this part is a special screw manufactured to print using 18-8 stainless steel, followed by a passivation process.

Custom Flanged Bronze Bearing

Flanged bronze bearing SAE 841 part made to print as a matching component to the 7/8 X .540 X 3/4-16 socket shoulder bolt.  It's inside diameter is 7/8" and outside diameter measures 1-1/8".  The inside surface area is intended to join with the shoulder of the bolt.

Special Shoulder Bolt To Be Coupled With Bronze Bearing

This custom shoulder bolt was made to print for our customer and measures 7/8 X .540 X 3/4-16.  18-8 stainless steel was used to produce the parts at a domestic US manufacturing plant.  It was intended to work in unison with the flanged bronze bearing manufactured to print for the same customer.  That part is shown in greater detail in the consequent blog post.

3/16 Special to Print Hex Jack Screw

This is a special to print screw manufactured in the United States, with full dimensions at 4/40 X 3/16.  The parts were made using steel material with nickel plating secondary service, as well as nylon patch application per customer's specifications.

Invar 36 1/4-20 X 1-1/4 Socket Cap Screws

We were presented with the challenge of having custom 12 socket cap screws made out of Invar 36 material to a provided print in a relatively short period of time, which is essentially a 36% nickel iron alloy material, with matching finished hex nuts.  This material is typically used for applications where dimensional properties must be maintained across a broad range of temperatures.  We were able to have the parts produced and delivered within 3 weeks of order date.  While in this specific case no certifications were required, various documentation would have been available to the customer if requested and required.