Search Our Custom Fasteners

Wednesday, April 6, 2016

Special Vented 8-32 X 5/8 Socket Head Cap Screw in Invar 36 Material

8-32 X 1/4 socket head cap screw, vented, in Invar 36 material - made special/custom to print with Engineered Source as the supplier and distributor.  Engineered Source services Santa Ana, Orange County, Los Angeles, San Diego, Inland Empire, Socal, California, and the remainder of United States as well as Mexico

This part is very much like the 6-32 X 1/4 vented socket cap screw shown in an earlier blog and this special invar part was also purchased by a university student at a relatively small quantity.  In quantities of 20-100 pieces the lead time for special socket cap screws with these parameters is approximately 1-2 weeks, with rush service available upon request.

Friday, March 25, 2016

Chrome Plated 316 Stainless Steel 6-18 X 3/4 Phillips Flat Sheet Metal Screw

Chrome Plated Phillips Flat Sheet Metal Screws in 316 stainless steel - Engineered Source is a supplier of chrome plated 316 stainless steel screws and fasteners, serving Santa Ana, Orange County, Los Angeles, San Diego, Inland Empire, Southern California, United States, Mexico

Engineered Source offers a variety of secondary services for both standard and special fasteners, with additional detail available at http://www.engineeredsource.com/customized-special-fastener-supplier-orange-county-ca-s/108.htm.  Chrome plating is typically done either in barrel form for larger quantities or by individually hanging the fasteners, which is significantly more expensive.  For parts that serve a critical aesthetic function, like screws on musical instruments, individual plating is preferred to limit the imperfections.  Barrel based chrome plating however is typically the ideal scenario for applications where cost and corrosion resistance are relatively more important than the aesthetics of the parts.  These chrome plated 316 stainless steel (easy to distinguish with the stamped dot at the flat head to designate the 316) sheet metal screws were barrel plated at approximately 30,000 pieces.  We stock these parts for our customer on a blanket purchase basis and release as needed throughout the year.

Special Machined Coupling Nut Made to Print In Aluminum Material

special custom machined coupling nut for aerospace made using aluminum material - engineered source is a supplier and distributor of special & custom coupling hex nuts in aluminum, stainless steel, etc - serving Santa Ana, Orange County, Inland Empire, San Diego, California, USA, Mexico

This is a special 6535AX coupling nut made for our aerospace customer to print using aluminum material.  Physical and chemical material certs are provided with the parts and they are produced domestically within the United States.  We stock this recurring part for our customer and release the parts as needed throughout the year.

Friday, March 11, 2016

Molded Black Rubber Bumper With Washer

special and custom molded rubber bumper parts to print - Engineered Source is a supplier and distributor of custom rubber bumper parts, covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, Southern California, and Continental United States

Engineered Source supplies its existing customer base a number of special rubber parts, and often specific rubber material sheets as well.  Regardless of the type of rubber material you require, chances are we can provide the special part you need for your application.  Please email us a sample or a print and we will work on providing the ideal solution for your needs.

Special Slotted Flat Head Machine Screw in Copper 110 Material

Special/Custom Slotted Flat Head Machine Screw in Copper 110 Material - Engineered Source is a supplier and distributor of special fasteners like this special clotted machine screw serving Santa Ana, Orange County, Los Angeles, San Diego, Inland Empire, and United States as a whole

This is a small 4-40 X 5/16 special copper machine screw supplied at just 100 pieces.  Small quantity special fastener orders like this are a daily routine for us and we can supply specials to print in just about any material.  Copper 110 material was used on this specific part and we were able to deliver the parts to our customer within 10 business days from order.

Wednesday, March 2, 2016

Special "Shim" Washers In 302 Stainless Steel

special "shim" washer in 302 stainless steel - engineered source is a premier supplier and distributor of stainless steel special washers in santa ana, orange county, los angeles, inland empire, san diego, southern california

Engineered Source Inc supplies its customer base an almost endless variety of special washers, from 302 & 304 stainless steel material to Teflon and everything in between.  This specific "shim" washer is made using 302 stainless steel and has dimensions of 2.198 ID, 2.647 OD, .018 TH with tolerance of +/- .010 on the OD and ID and +/- .001 for the thickness.  Special washers, like most other special fastener parts we supply, are typically ordered on a blanket purchase order basis with scheduled or as-needed releases.

Tuesday, February 16, 2016

M3 X 6MM Hex Standoff In Nylon Material

M3 X 6MM hex standoff & similar electronics nylon fasteners distributed/supplied by Engineered Source - covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, Southern California

Electronics hardware like this M3 X 6MM nylon standoff are one of our long time specialties and we supply virtually every variation to our customer base.  Most of the time these nylon standoff parts are needed in significant enough quantities to use our overseas sources but domestic sources are also available when specifically requested.  Like all fasteners we supply, stock and release arrangements are commonly used for these nylon fasteners.

Friday, February 12, 2016

Special Flat Head Socket Cap Screw to print in 4140 Alloy Steel

Special/custom Flat Head Socket Cap Screw to print in 4140 Alloy Steel with soft 2A fit - engineered source is a supplier and distributor of special socket cap fasteners - serving santa ana, orange county, los angeles, san diego, inland empire, southern california, united states, and mexico

This special socket cap screw is used by our customer for initial testing purposes before committing to a larger quantity in 304 Stainless Steel material - this batch was made using 4140 Alloy Steel at 60 pieces to save money at the testing stage.  Lead time for this part was 8 days from order.

Monday, February 8, 2016

Special Vented Invar 36 Socket Cap Screws

Special/Custom to print 6-32 X 1/4 Socket Cap Screw in Invar 36 material with vented holes - supplier in small quantity by Engineered Source Inc, covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, Southern California, United States, and Mexico

Small quantity special fasteners like this Invar 36 Socket Cap Screw measuring 6-32 X 1/4 are a perfect project us.  Typically used by our customer for preliminary testing purposes, specials like this are produced by our long time trusted factory sources selected based on the exact quantity, material requested, and lead time required.  These Invar 36 screws were purchased at 40 pieces and were shipped within 8 days of original order.  Please think of us for any similar needs you may have!

Thursday, February 4, 2016

Special 7/16-20 Left Hand Thread Hex Head Bolt in 1018 Cold Rolled Steel

Special to print 7/16-20 left hand thread hex bolt in 1018 cold rolled steel - engineered source is a supplier and distributor of custom left hand hex bolts and screws in steel, stainless steel, alloy, and exotic materials - serving santa ana, orange county, los angeles, san diego, inland empire, southern california, united states, mexico

This is a special 7/16-20 hex head bolt with left hand thread that we have been supplying the same customer for over 5 years.  It incorporates a special marked stamp per the customer's print and is manufactured using 1018 cold rolled steel, which is carburized to 1700 degrees, soaked for 2 hours, and oil quenched.  Like many of the parts we supply this special part is supplier on an as-released blanket purchase basis.