Search Our Custom Fasteners

Thursday, October 13, 2016

Custom Grade 5 Coupling Nut

Custom/special 3/4-10 grade 5 coupling nut - engineered source is a supplier and distributor of custom/special coupling nuts in steel and stainless steel materials - covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, United States, and Mexico

This is a special Grade 5 coupling nut that is used together with a special mold bolt and square washer pictured below.  It measures 3/4-10 by 1-1/2 inches in length, and can be supplied with plain and light oil finish or hot dip galvanized finish as pictured here.  Together with the other two components, this coupling nut is supplied on a blanket as-released order basis.

Special Inconel Rolled Pin

custom/special rolled inconel alloy c-276 pins - engineered source is a supplier and distributor of custom/special inconel rolled, spring, and dowel pins - covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, USA, and Mexico

We supply a number of version of this special pin made using Inconel alloy C-276 material in the USA.  The part is stocked and released as needed to our long time customer.  The inconel materal is hot rolled, pickled, and annealed - the final pins shown here measure 1/16 X .850".

Tuesday, October 11, 2016

Special to Print Grade 5 Hex Head Cap Screw With Black Oxide Finish

Custom/special hex head cap screw in grade 5 steel black oxide material - Engineered Source is a supplier and distributor of custom/special grade 5 hex head cap screws with black oxide finish - covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, USA, and Mexico

We supply approximately 20,000 pieces of this custom grade 5 hex cap screw annually on an as-released basis to our long time customer.  The parts are made in the USA and measure 5/16-24 X 7/8.  With the black oxide finish typical lead time for parts like this hex cap screw is approximately 5-6 weeks from order.

Monday, October 10, 2016

Special 5/8-18 Nickel Plated Palnut For Aerospace Applications

Special Nickel Plated Palnut For Aerospace Application - Engineered Source is a supplier of special aerospace and mil-spec hardware/fasteners - covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, USA, and Mexico

This is a 5/8-18 palnut that we supply on a blanket purchase order basis to one of our aerospace customers.  Per their specific specifications we have the plain steel version of this part nickel plated to QQ-N-290, with copper strike.  Parts go through a 5 hour pre-bake process and also an 8 hour post-bake process at 375 degree Fahrenheit.  To our customer's request all passivated and plated parts are shipped with a NADCAP cert.

Custom Stainless Steel Square 5/16 X 6-1/2 U Bolts

Custom/special Square U Bolts in Type 304 stainless steel - Engineered Source is a supplier and distributor of custom/special square shaped U-bolts in stainless steel - covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, USA, and Mexico

This is another set of square u-bolts we supplied a customer in Los Angeles for a temporary set installation project.  Type 304 stainless steel material was used and 5/16 diameter coarse thread was applied at 2 inches on the feet.  Inside diameter for these u-bolts is 6-1/2 inches.

Special NAS9921C5B20F & NAS9921C5B19F Shear Bolts

Custom/special NAS 9921 shear bolt fasteners - Engineered Source is a supplier and distributor of custom/special aerospace and mil-spec fasteners like this NAS9921 shear bolts - covering Orange County, Los Angeles, San Diego, California, USA, and Mexico

As you can see in the print below, which continues for another 4 pages of specifications, these shear bolts are a tough part to make.  5/16-24 thread pitch is used for the threaded section, with a thread locking patch.  A286 material is used to make the part, with heat treat and passivation per AMS 2700.  We supplied the customer 6 pieces of each part, made specifically for their order and specifications.

Thursday, October 6, 2016

Custom 5/16 X 7-1/2 Square U Bolt In 304 Stainless Steel

custom/special square u bolts in 304 stainless steel - engineered source is a supplier and distributor of custom stainless steel square u-bolts - covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, USA, and Mexico

This is a square U bolt in 304 stainless steel that we supplied to a customer at just 32 pieces.  The 2 inches of thread on either side are 5/16-18 coarse thread and the inside depth of the part is 7-1/2 inches, while the inside diameter is at 6-1/16 inches.  Also a rush project, these parts were completed within 3 days as well from order.

Custom 5/16 Diameter 304 Stainless Steel U-bolt

Special custom 5/16 diameter u-bolt in stainless steel - engineered source is a supplier and distributor of custom u-bolts in stainless steel - covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, United States, and Mexico

Custom U bolts are a daily routine for us and this is a 5/16-18 threaded U bolt we supplied a customer, made in the USA using 304 stainless steel material with plain finish.  It measures 4-5/16 inches on the inside width and 5-1/2 inches on the inside depth.  The customer was in a big rush and we were able to get the parts made and shipped within 3 days from order.  Material certs were provided as well per our customer's request.

Tuesday, October 4, 2016

Custom Metric Button Socket Cap Screw In 302 Stainless Steel

Custom/special metric button head cap screws in 302 stainless steel - engineered source is a supplier and distributor of custom/special metric button head socket cap screws in stainless steel material - covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, United States, and Mexico

This is a special to print custom button head cap screw we supply a long time customer on an annual basis at approximately 5,000 pieces - it measures M3 X 0.5 X 7.24MM.  They are supplied in increments of 5,000 pieces and are made in the United States using 302 stainless steel material with passivation as the final stage in the process.  Fine thread and a special to print point is incorporated in these parts, which resembles an oval point on a standard set screw.

Special Made DIN912 M12 X 1.5 X 70MM Socket Cap Screw

Special/custom made DIN912 M12 X 1.5 X 70MM socket cap screw in 12.9 alloy steel - engineered source is a supplier and distributor of custom made metric socket cap screws in alloy material - covering Santa Ana, Orange County, Los Angeles, San Diego, Inland Empire, California, United States, and Mexico

We supply countless metric fasteners to our customer base and often due to availability or additional customer specific requirements we have a number of alloy socket cap screws special made to order.  This DIN912 M12 X 1.5 X 70MM is a perfect example.  We provide this socket screw to our customer on an as-released blanket purchase order basis and typically stock a 6 month supply at any one time.  It is made in the USA in 12.9 alloy steel material with plain and light oil finish.