Search Our Custom Fasteners

Tuesday, January 17, 2017

Custom 316 Stainless Steel Threaded Weld Studs

custom specialty 316 stainless steel 3/4-10 X 2-1/4 threaded weld studs - engineered source is a supplier and distributor of custom/specialty 316 stainless weld studs - covering Orange County, Los Angeles, Inland Empire, San Diego, California, United States, and Mexico

We supply our customer base a large array of custom made to print weld studs like this 316 stainless steel reduced base weld stud.  It measures 3/4-10 X 2-1/4 and is sold to our customer on an annual as-released blanket purchase order basis.  Our internal part number is CJL-075036-J.

Friday, January 13, 2017

Custom 1/4-20 Fully Threaded Studs In Brass Material

custom cut 1/4-20 threaded rod studs in brass material - engineered source is a supplier and distributor of custom threaded studs and rods in stainless, steel, and brass materials - covering Orange County, Los Angeles, Inland Empire, San Diego, California, USA, and Mexico

These are custom cut and chamfered 1/4-20 threaded studs in brass material that we supply to our long time customer at small 50-100 pieces quantities.  Lead time is typically 1 to 2 weeks depending on the situation, which can be significantly improved with a rush charge if necessary.  Our internal part number is FTS-014048-O.

Thursday, January 12, 2017

Custom 1/2-13 X 8-1/2 Low Head Stainless Steel Socket Head Cap Screw

custom specialty stainless steel socket head cap screws/bolts - engineered source is a supplier of custom made stainless steel socket head cap screws - covering Orange County, Los Angeles, Inland Empire, San Diego, California, USA, and Mexico

This is a custom low profile socket head cap screw we supplied to a customer at just 10 pieces, made in the USA using 303 stainless steel material.  It is a coarse thread 1/2-13 part at 8-1/2 inches in length.  The threaded portion of the screw is at approximately 3 inches in length.  Material certs are available upon request.  Our internal part number is SCS-050136-I.

Custom ASTM-A684 High Carbon Wave Spring Washer

custom/specialty steel wave spring washers - engineered source is a supplier of custom wave spring washers in steel and stainless steel grades of material - covering Orange County, Los Angeles, Inland Empire, San Diego, California, USA, and Mexico

We supply a number of carbon steel 3-wave spring washers like this ASTM-A684 spring washer we provide a customer on an annual blanket purchase order basis.  This washer measures approximately 1.658 on the inside diameter, 2.132 on the outside diameter, and a thickness of approximately .148 inches.

Thursday, January 5, 2017

Custom 1/2 X 7" Round A36 Galvanized Steel U-Bolts

Custom A36 hot dip galvanized steel round u-bolts - engineered source is a supplier and distributor of custom/specialty A36 steel and stainless steel u-bolts - covering Orange County, Los Angeles, Inland Empire, San Diego, California, USA, and Mexico

These custom made u-bolts were manufactured on a rush basis for a customer in dire need, completed within approximately 1 week from order.  A36 steel material was used with hot dip galvanized finish per customer's instructions.  3 inches of coarse thread were incorporated at each leg, with the inside depth at 7" and inside width at 5".

Custom DIN 7991 M14 X 50MM Flat Socket Cap Screw In Class 10.9 Alloy Steel

Custom & specialty DIN 7991 M14 X 50MM socket cap screws/bolts in alloy steel - engineered source is a supplier of custom made flat socket cap screws in alloy steel and stainless steel materials - covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, and continental USA

We supply our customer base countless custom made metric socket screws like this special to print M14 X 1.5M X 50MM flat socket cap screw in 10.9 alloy steel, with plain and light oil finish.  This custom socket screw is supplied in small quantities from 10-50 pieces at a time and is often used in automotive and motorcycle applications.

Friday, December 16, 2016

Custom 18-8 Stainless Steel Washer

Custom/specialty 18-8 stainless steel stamped washers - engineered source is a supplier of custom and specialty washers in a variety of stainless steel grades - covering Orange County, Los Angeles, San Diego, Inland Empire, continental USA, and Mexico

This is one of the countless custom to print stainless steel washers we supply on a revolving blanket purchase order basis - it is a domestic made 18-8 stainless steel flat washer measuring .170 X .500 X .030.  Tolerances on the OD are +/-.0050 and the ID is maintained within .170-.177 per the customer specific requirements.  The thickness on the washer ranges between .030 and .040 inches.

Thursday, December 15, 2016

Specialty O-Ring Sealing Machine Screws

custom/specialty o-ring sealing machine screws - engineered source is a supplier of specialty custom and standard screws with built-in o-rings to allow for sealing feature - covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, United States, and Mexico

We provide our customer base a diverse array of specialty sealing screws like this 6-32 X 3/8 phillips pan head machine screw in 18-8 stainless steel with built-in buna o-ring.  The sealing feature can be incorporated using a variety of different materials and methods, depending on the customer's specific requirements.  We supply these specific screws to our customer on a revolving blanket purchase order basis.

Custom 1/2 X 15-3/8 Galvanized ASTM A36 Steel U-bolts

custom special galvanized astm A36 steel round u-bolts - engineered source is a supplier and distributor of custom round galvanized steel u-bolts - covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, United States, and Mexico

These are custom round u-bolts made using A36 galvanized steel material with just 1 inch on the inside width and 1-1/2 inches of 1/2 coarse thread.  They are used in specialized fencing applications and supplied in quantities ranging from 20-100 pieces at a time, with a few different lengths per our customer requirements.  Material certs are supplied with the parts with each shipment.

Thursday, December 8, 2016

Custom 4-40 X 3/8 Slotted Flat Machine Screws in Copper 110 Material

Custom/specialty 4-40 X 3/8 copper 110 slotted flat head machine screws - engineered source is a supplier and distributor of custom/specialty copper 110 slotted flat machine screws - covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, United States, and Mexico

This is another 4-40 slotted flat machine screw we supply our long time customer, typically in small batches of 50-100 pieces per order.  They are 3/8 in length and are manufactured in the United States using Copper 110 material.  Material certs are provided with each shipment and blanket purchase order arrangements are always doable.