Custom Metric Socket Cap Screws With Zinc Yellow Finish And 1193S Thread Locking Patch - M5 X 0.80M X 16MM In Alloy Steel

These are custom metric socket cap screws with an undersized head diameter that we have provided to an aftermarket automotive product manufacturer for many years.  Measuring M5 X 0.80M X 16MM, the socket cap screws are domestically manufactured in alloy steel material and then finished with zinc yellow finish.  The final step involves the application of 1193S thread locking patch on each screw.  Our internal part number for this custom item is DIN912-05016-C1193S.

Custom Made 316 Stainless Steel Round U-Bolts - 1/2-13 X 2-1/2

These are custom made 316 stainless steel round u-bolts made domestically at 100 pieces with a lead time of 2 weeks from confirmed order.  The inside width was set at .94" and inside depth at 2-1/2".  1.38 inches of coarse thread was incorporated on both legs.  Material certs and our C of C is available upon request - our internal part number is UB050040-J.

Custom Stainless Steel Shoulder Bolts - 1/8 X 1-1/2 Shoulder

These are custom stainless steel shoulder bolts made domestically in the USA using 18-8 stainless steel material.  We typically run production at approximately 10,000 pcs per order for our customer and the lead time ranges between 5 and 6 weeks from confirmed order.  The shoulder measures 1/8 X 1-1/2, with 4-40 thread.

Custom Galvanized Steel Round U-Bolts - 3/8 X 11-5/8

These are custom galvanized steel round u-bolts made domestically using A36 galvanized steel material.  We supplied them at 200 pieces per order with a lead time of 2-3 weeks from confirmed order.  3/8 diameter bar was used and the inside width was set at 2-5/8", inside depth at 4-3/4", and approximately 2-5/8" of coarse thread was incorporated on each side.

Custom Metric Invar 36 Screws - M3-.5M X 10MM Socket Head Cap Screws

These are custom metric Invar 36 screws that we supply the University of Montreal in Canada at approximately 50 pieces per order.  They are manufactured domestically in the United States with a lead time of 2 weeks and are provided with all required certifications.

Custom Stainless Steel Compression Springs - .240 X .032 X 1

These are custom stainless steel compression springs we supply to our customer on an as-needed basis at approximately 20,000 pieces per order.  The lead time is typically 4-6 weeks for full production.  The stainless steel wire used is .032 in thickness and the total static length of the springs is 1 inch.

Custom Metric Dowel Pins - M8 X 35MM In Alloy Steel With One Side Tapped With M4 X 0.7M Thread

These are custom metric dowel pins we supply to our long time electronics OEM customer.  They are made using alloy steel at M8 X 35MM and are tapped on one side each for M4 X 0.7M thread.  The thread depth is set at 3MM and the other side is left untouched.  These custom dowel pins are manufactured domestically with a lead time of 6-8 weeks.

Custom Square Steel U Bolts - 5/8 X 12-11/16 In CD-C1018 Steel Material With No Finish

We supplied these 5/8 diameter custom square steel u bolts to our customer at just 2 pieces for prototype purposes.  Since plain C1018 steel was used for the production the lead time was just 3-4 days, which would typically be closer to 2 weeks if hot dip galvanizing or plating process was involved.  The inside width measured 14-5/8, inside depth was at 12-11/16, and approximately 4 inches of coarse thread was incorporated on each leg.

Custom Poly Coated U Bolts - 3/8 X 11-1/2 Round U Bolts In 18-8 Stainless Steel Material

These are one of the custom poly coated u bolts we supply our customer in Cleveland OH.  It is made using 18-8 stainless steel material with poly coat for protection against vibration, heat, UV rays, uneven surfaces, and other adverse environmental conditions.  The lead time from order confirmation was approximately 3 weeks.  The inside width, including the poly coat material, was at 4-9/16", while the inside depth was set at 11-1/2.  Coarse 3/8 diameter thread was incorporated at 2 inches on each leg.  Our internal part number is CUB037184-I.

Custom Washers In 18-8 Stainless Steel Material

These are custom washers in 18-8 stainless steel, manufactured domestically at just under 4,000 pieces.  The lead time was approximately 6 weeks from order confirmation.  Inside width on the washer is .340" to .350" and the outside width is .466" to .500".  Plain 18-8 stainless steel material was used and our internal part number is WA-340466057-I.