Search Our Custom Fasteners

Tuesday, October 17, 2017

Blue Coated Aerospace Hardware - 1/4" Shoulder Screw In Alloy Steel With Alumazite KL-55 Blue Coating

Blue Coated Aerospace Hardware - 1/4" Shoulder Screw In Alloy Steel With Alumazite KL-55 Blue Coating

This is an example of blue coated aerospace hardware we supply, with a 1/4 diameter shoulder screw in alloy steel coated with Alumazite KL-55 blue finish.  The blue coating was intended to allow an robotic color coded system to recognize the screw and yet maintain its integrity in environments up to 600 degrees F.  The coating is also intended to limit any risk of off-gassing and usability of the hex socket drive.  Only the head is coated to avoid the complications of having any coating on the shoulder and threaded surfaces.

Monday, October 9, 2017

Custom Zinc Plated U Bolts - 5/16 X 3-1/2 With Plates & Hex Nuts

Custom Zinc Plated U Bolts - 5/16 X 3-1/2 With Plates & Hex Nuts

These are custom zinc plated u bolts we supplied to our customer at 150 sets that included 2 hex nuts per u bolt and a flat plate measuring 1/8 X 2 X 3-1/4 inches.  The lead time without any rush service was at 2 weeks from order confirmation.  Material certs were provided with the parts per customer specifications.  The inside width of the u bolt was set at 2 inches, inside length at 3-1/2, and 2 inches of 5/16 coarse thread was incorporated on each leg.  The sets were delivered to the customer fully assembled as shown in the picture.

Custom Black Nylon Washers - Flat Nylon Washers Dyed Black .187/.500/.040

Custom Black Nylon Washers - Flat Nylon Washers Dyed Black .187/.500/.040

These are custom black nylon washers that we supply to one of our oldest customers on a recurring blanket purchase order basis.  Average annual volume it approximately 800,000 pieces and we typically maintain at least a 6 month supply on hand at all times.  Actual production time required is typically 6-7 weeks from order and the flat washers measure .187 inches on the inside diameter, .500 inches on the outside diameter, and .040 inches on the thickness.

Friday, October 6, 2017

Large Custom Double Sided Studs - Grade 8 1-1/4 X 52 Inch Overall Length

Large Custom Double Sided Studs - Grade 8 1-1/4 X 52 Inches Overall Length

These are large custom double sides studs made using grade 8 steel material at 1-1/4 diameter and 52 inches overall length.  Each side had 6 inches of thread and a grade 8 nylon insert zinc yellow lock nut.  Production for 8 pieces took approximately 1 week.  Material certs were made available to our customer upon request.

Custom Partially Knurled Pins In Plain Steel Material - 6-32 Thread On One Side

Custom Partially Knurled Pins In Plain Steel Material - 6-32 Thread On One Side

These are custom partially knurled pins made using plain low carbon steel material.  One side is threaded at 6-32 with approximately .375 inches of thread while the other is diamond knurled at .20 inches max.  Overall length is set at .855 inches.  Production was done domestically at approximately 1,000 pieces.

Wednesday, September 20, 2017

Custom Grade 8 U Bolts With Rolled Thread - 1/2-13 X 8-1/2" Round U-Bolt in 4140 SAE Grade 8 Material

Custom Grade 8 U Bolts With Rolled Thread - 1/2-13 X 8-1/2" Round U-Bolt in 4140 SAE Grade 8 Material

These are custom grade 8 u bolts made using 4140 SAE grade 8 steel material with rolled 1/2-13 thread.  The hardness was recorded at 36 HRC and tensile strength at 162 KSI.  5 pieces were made for our customer for testing purposes prior to a larger commitment.  The inside width was set at 4.76", inside length at 8.5", and approximately 1.75" of rolled thread was incorporated on both legs.  Material and heat treat certs were provided with the parts per our customer's request.

Monday, September 18, 2017

Custom Socket Shoulder Screws With Thread Locking Nylon Patch - 6-32 X .393" In Grade 2 Material With Phos Finish

Custom Socket Shoulder Screws With Thread Locking Nylon Patch - 6-32 X .393" In Grade 2 Material With Phos Finish

These are custom socket shoulder screws made using grade 2 steel material with phos finish and a thread locking patch.  Measuring 6-32 X .393" with a shoulder at .080" and head height at .125" this custom socket shoulder screw is manufactured overseas in increments of 100,000 pieces to be released to our long time customer on an as-needed blanket purchase order basis.  Initial lead time for the first release is typically 120-150 days from order confirmation.  When needed, we can provide a print with dimensions and tolerances for the customer to approve prior to production start.

Tuesday, September 5, 2017

Rush Order Custom Square U Bolts - 3/8 X 9" In 304 Stainless Steel Material

Rush Order Custom Square U Bolts - 3/8 X 9" In 304 Stainless Steel Material

These are rush order custom square u bolts made domestically using 304 stainless steel material.  We had 50 pieces manufactured for our customer at just 3 days production time to be shipped next day air directly to the job site.  Material certs and a certificate of conformance was provided per our customer's specific instruction.  The inside width was set at 4 inches, inside depth at 9 inches, with approximately 2 inches of 3/8 coarse thread on each leg.

Friday, September 1, 2017

Specialty Round 316 Stainless Steel U Bolts - 1/2-13 X 7-1/4 With 316 Stainless Steel Hex Nuts

Specialty Round 316 Stainless Steel U Bolts - 1/2-13 X 7-1/4 With 316 Stainless Steel Hex Nuts

These are custom specialty round 316 stainless steel u bolts supplied to our long time customer.   They were manufactured domestically to the customer's drawing in plain 316 stainless steel material, with a lead time of 5 days.  Material certs and a certificate of conformance was provided with the parts per the customer's request.  The inside width is 4-9/16" while the inside length is maintained at 7-1/4".  Approximately 3 inches of 1/2-13 thread was incorporated on each leg.

Thursday, August 31, 2017

Custom Stainless Tamper Proof Sheet Metal Screws - 6-18 X 1/2 Oval One Way Type A Sheet Metal Screws In 18-8 Stainless Steel

Custom Stainless Tamper Proof Sheet Metal Screws - 6-18 X 1/2 Oval One Way Type A Sheet Metal Screws In 18-8 Stainless Steel

These are custom stainless tamper proof sheet metal screws measuring 6-18 X 1/2 inch in length.  A tamper resistant one way oval head is incorporated with type A sheet metal screw thread.  We have these parts manufactured domestically at 30,000 to 50,000 pieces and release them to our customer as needed throughout the year.  18-8 stainless steel material is used on these specific one way oval screws but we also supply an identical part in 316 stainless steel material.