Search Our Custom Fasteners

Friday, May 18, 2018

Custom Dog Point Screws - 10/24 X 5/8 Socket Head Cap Screws In 18-8 Stainless Steel With Half Dog Point

Custom Dog Point Screws - 10/24 X 5/8 Socket Head Cap Screws In 18-8 Stainless Steel With Half Dog Point

We have been supplying our long time OEM customer with these custom modified parts for many years.  They are 18-8 stainless steel socket head cap screws with a half dog point.  Flatness of the point is most critical to our customer's application and the process had to be refined over the first few years to get it absolutely right.  The half dog point dimensions are based on ASME B18.3-2003.

Thursday, May 17, 2018

Custom Automotive Flat Socket Machine Screw - 1/4-28 X 1/2 In Grade 5 Steel Material With Thread Lock Patch & Level III PPAP

Custom Automotive Flat Socket Machine Screw - 1/4-28 X 1/2 In Grade 5 Steel Material With Thread Lock Patch & Level III PPAP

These are custom automotive flat socket machine screws we supply our aftermarket automotive OEM customer.  Parts are manufactured domestically with production runs of 5,000 pcs and lead time of approximately 8-10 weeks.  Cold headed 5/32 hex drive is incorporated with fully threaded 1/4-28 body and 60 degree countersink angle.  3/32 of hex key engagement is required and nylon thread lock patch is added to finalize the parts.  Level III PPAP was provided to the customer with the parts.

Monday, May 14, 2018

Custom Large 316 Stainless U-bolts - 1/2 X 18" Round Custom U-bolts With 4 Hex Nuts Each

Custom Large 316 Stainless U-bolts - 1/2 X 18" Round Custom U-bolts With 4 Hex Nuts Each

These are custom large 316 stainless u-bolts we supplied our customer in San Diego.  They specialize in waterworks related construction and specifically needed 316 stainless steel material with a fast turnaround.  We were able to ship the parts within 4 days of order confirmation.  1/2" diameter bar stock was used with 2 inches of coarse thread on each leg, with inside width measuring 16.25" and inside length at 18".

Saturday, May 12, 2018

Custom Stainless Steel Studs - 3/4 X 6 Inch 316 Stainless Steel Threaded Studs

Custom Stainless Steel Studs - 3/4 X 6 Inch 316 Stainless Steel Threaded Studs

These are one of many custom stainless steel studs we supply our recurring customers. This specific order of 3/4" X 6" threaded studs in 316 stainless steel consisted of 42 pieces.  Off the shelf 6 foot 316 stainless steel threaded rod was cut and chamfered on both sides - production took 4 days from receipt of order.

Custom Bent Anchor Bolts - 1/2 X 5" Bent Concrete Anchor Bolts in A449 Plain Steel Material

Custom Bent Anchor Bolts - 1/2 X 5" Bent Concrete Anchor Bolts in A449 Plain Steel Material

One of the custom bent anchor bolts we have supplied to our construction customer at 12 pieces in April.  Plain A449 material was used and the parts were ready to ship within 6 business days from order.  1/2 bar material was used and approximately 2 inches of coarse thread was incorporated on each leg.  One leg was set at 3" and the other at 5" overall length from the inside of the bend.  Faster lead time was made available with an expedite option.

Friday, May 11, 2018

Custom Large HDG U-Bolts - 1-8" X 23-3/8 In A36 Steel Material, Galvanized Finish

Custom Large HDG U-Bolts - 1-8" X 23-3/8 In A36 Steel Material, Galvanized Finish

Jose, aka "Chef", is holding up two custom large HDG U-bolts we had produced for our custom in Rock Hill, South Carolina.  Time was of the essence and we were able to ship the parts within approx 7 business days of order with 4 galvanized heavy hex nuts per u-bolt.  1" diameter A36 material was used, with 4.75" of coarse thread on each leg.  Inside width measured at 19.5" and inside length at 23.375".

Thursday, May 10, 2018

Custom Slotted Flat Copper Machine Screws - 4/40 x 5/16 in 110 Copper Material

Custom Slotted Flat Copper Machine Screws - 4/40 x 5/16 in 110 Copper Material

These custom slotted flat copper machine screws are one of multiple sizes we have supplied our customer over the years.  They are custom made each time as ordered due to relatively small usage and are typically shipped within 2-3 weeks of order.  This specific 4/40 X 5/16 version was produced domestically at 1,100 pcs under our internal part number MSF-0405-Z.  Material certs are made available upon request and expedited processing is typically available, depending on raw material availability.

Custom J-Bolts - 1/2 X 10-3/4 In A36 Plain Steel Material

Custom J-Bolts - 1/2 X 10-3/4 In A36 Plain Steel Material

Custom J-Bolts made domestically using A36 material without any finish.  Our customer needed just 18 pieces urgently and we were able to get them made and shipped within 4 days of order.  1/2 inch bar stock was used with 1-1/4" inside width on the J-turn and 1-3/4" on the short leg.

Wednesday, May 2, 2018

Custom Knurled Hardware - Test Knurling Samples For Custom 41L40 Steel Plate Bolts

Custom Knurled Hardware - Test Knurling Samples For Custom 41L40 Steel Plate Bolts

Over the years we have provided countless custom knurled hardware pieces - below is a snapshot of a custom bolt we are working on producing for a customer that is intended to be hammered into a predrilled steel plate.  We noticed that the spec calls out for diamond knurling but realized that probably won't work for the intended purpose, which is to keep the bolt from spinning after being inserted.

Wednesday, April 25, 2018

Custom Aerospace Socket Screws - NA0069A040046 Socket Head Cap Screws in 1250 MPA A286 Material

Custom Aerospace Socket Screws - NA0069A040046 Socket Head Cap Screws in 1250 MPA A286 Material

These are custom aerospace socket screws we had domestically produced for our aerospace customer at 50 pieces.  The trickiest part was the 1250 MPA requirement that our customer insisted on, which is a deviation from the standard NA0069A040046 specification.  We were able to supply the custom part faster than our original promise date at approximately 3 weeks from order receipt.  M4-0.7 thread was incorporated and test results confirmed 39-40 HRC after AMS 2759/3 Rev. F heat treat process.  NADCAP certified passivation per AMS-2700 was also performed and all certifications were provided to our customer with the parts.