Search Our Custom Fasteners

Thursday, September 24, 2020

Custom Long Socket Head Machine Screws - 8-32 & 8-36 Thread In 4140 Alloy Steel

 

Custom Long Socket Head Machine Screw Manufacturer- 8-32 Thread In 4140 Alloy Steel
These custom long socket head machine screws were manufactured domestically using 4140 alloy steel material with heat treatment to reach 37-44 Rc hardness.  Two sizes were produced together in this run: 8-32 X 5.43" length with thread length of 5/8" and 8-36 (an odd thread pitch requested for this one) X 6-3/8" with the same 5/8" thread length requirement.  The thread was cut rather than rolled for these parts and the hex drive was broached.  

Tuesday, September 22, 2020

Custom Large B7 Threaded Studs - 1-1/5 X 6-1/4" With Zinc Clear Finish

 

Custom Large B7 Threaded Studs Manufacturer - 1-1/5 X 6-1/4" With Zinc Clear Finish
We had 64 pieces of these custom large B7 threaded studs manufactured for our customer, with the cut and chamfer of the plain parts done domestically followed by commercial zinc + clear plating operation.  The threaded studs measured 1-1/5 - 8 X 6-1/4 and were supplied with ASTM A194 2H heavy hex nuts.  The cut and chamfer operation was relatively easy and quick but the zinc plating process took approximately 2 weeks to complete.  Rush processing is available if a quicker turnaround is ever required.

Thursday, August 13, 2020

Custom Automotive Ball Studs - 1215 Steel, Zinc Yellow

Custom Automotive Ball Studs - 1215 Steel, Zinc Yellow
 We had 20,000 pieces of these custom automotive ball studs produced in 1215 steel material with heat treat hardening to 25-34 HRC and zinc yellow finish.  The across the flats dimension on this ball stad was relatively large compared with the .25" ball diameter, measuring .437 +/-.01".  Overall length measured .950" with the 1/4-28 thread taking up approximately .423".  

Friday, August 7, 2020

Custom Grade 5 Lug Nuts - 5/16-24 Thread

 

Custom Grade 5 Lug Nuts - 5/16-24 ThreadWe supplied approximately 21,000 pieces of these custom grade 5 lug nuts to our customer, manufactured using medium carbon steel material with zinc clear finish.  Blue thread lock patch was applied at 360 degrees across the length of internal thread per customer specifications.  An 82 degree angle was maintained at the cone side and .500" width across the flats.  Overall length (height) of the lug nut was also set to .500".  Full certs were available with the parts.

Tuesday, July 21, 2020

Custom 316 Stainless Steel Button Head Screws - Metric


Custom 316 Stainless Steel Button Head Screws - Metric
These custom 316 stainless steel button head screws were manufactured domestically using ASTM A240 spec raw material.  All dimensions and tolerances were to a drawing provided by our customer.  M2.5 X .45 thread was incorporated (cut thread) with thread length set to 8MM.  Head diameter was set to 4.50MM-4.7MM and head height at 1.36MM-1.50MM.  Note that the button head was actually fully machined rather than the typical cold headed operation.  The hex socket drive was broached as a result.  Full certs were provided to our customer per request.

Friday, July 17, 2020

Custom Automotive Ball Studs In Grade 5 Steel With Zinc Yellow Finish


Custom Automotive Ball Studs In Grade 5 Steel With Zinc Yellow Finish
We had 15,000 pieces of these custom automotive ball studs produced in 1215 medium carbon steel material with heat treatment to achieve 25-34 HRC hardness.  10-32 thread (2A fit) was rolled for these parts and the hex was made to .311" across the flats.  Overall length of the part measured .815" and the ball diameter was set to .25".  

Custom 6-Lobe Socket Head Screws - 4140 Alloy Steel Material


Custom 6-Lobe Socket Head Screws - 4140 Alloy Steel Material
These custom 6-lobe socket head screws were manufactured domestically using 4140 alloy steel material with heat treat to 42-47 HRC.  2A 6-48 UNS thread was incorporated with thread length at .375".  T15 6-lobe drive was cold formed and the thread rolled.  This part is almost identical with the .200" length version discussed in an earlier post.  Full certs were provided with the parts per our customer's requirements.  

Thursday, July 16, 2020

Custom Lag Thread Bent Anchors - Steel Zinc Material


Custom Lag Thread Bent Anchors - Steel Zinc Material

These custom lag thread bent anchors were manufactured for a woodworking company in Hawaii that required lag screw thread on the long leg and a cosmetically appealing zinc clear finish.  CD-C1018 material was used at a 1/4" in diameter, with a 90 degree bend.  The short leg measured 3/4" in length on the inside and the long leg at 5" overall including the 3/4" of lag screw thread.  All production was done domestically on these parts for the fastest turnaround.

Custom Black Thumb Screws - Knurled 6-32 X 3/8


Custom Black Thumb Screws - Knurled 6-32 X 3/8
These custom black thumb screws with diamond knurl were manufactured to our customer's drawing at 2,000 pieces using low carbon steel material with black oxide finish.  The head diameter is set to .313" +/- .005" and the thread length is .375" with the same tolerance.  6-32 thread was rolled rather than cut on these parts.  Full certs were provided with the parts.

Thursday, June 25, 2020

Custom 4037 Alloy Steel Flat Socket Head Screws With Cadmium Plating


Custom 4037 Alloy Steel Flat Socket Head Screws With Cadmium Plating
We had 5,000 pcs of these custom 4037 alloy steel flat socket head screws produced in the USA for our aerospace customer.  ASTM A574 4037 material was used for the production and the cadmium plating was dome per AMS-QQ-P-416A TYpe II, with thickness at 0.0005-.0008".  Heat treat was performed to get the hardness of the parts to Rc 41-45.  The socket drive was cold formed and the thread rolled, both at the same facility.  Full certs were provided with the parts per our customer's requirements.