These custom M45 X 1.5 internal thread nylon insert lock nuts were manufactured for our EV automotive customer in Class 8 material with zi...

  We supplied our customer these low profile hex socket drive "hurricane bolts" in three different lengths: 1/4-20 X 45MM, 1/4-20 ...

 These custom J nuts were manufactured for our EV automotive customer using class 10.9 steel material with a M8 internally threaded hex nut ...

  These custom locking tee nuts were manufactured using 304 stainless steel material and were offered in both plain and glass bead blast fin...

  These custom socket head screws were manufactured to our customer's drawing with a long length of 289MM under the head, with half of t...

  These custom automotive shaft collars were manufactured using Grade 5 steel material to an outside diameter of 71MM, width of 19MM, and ga...

  These custom stamped brackets were manufactured using tempered .063" thick steel sheet material for our specialty OEM customer.  A nu...

  These custom internally threaded stainless steel ball studs were manufactured using 303 stainless steel material with 12-40 internal threa...

  These custom 1/4-20 A286 stainless steel hex nuts were manufactured domestically for our aerospace/drone manufacturing customer.  DFARS co...

  These custom automotive fastener kits included grade 5 5/16-24 partial thread hex bolts, split lock washers, and grade 5 hex nuts.  All pa...