These custom locking tee nuts were manufactured using 304 stainless steel material and were offered in both plain and glass bead blast fin...

  These custom socket head screws were manufactured to our customer's drawing with a long length of 289MM under the head, with half of t...

  These custom automotive shaft collars were manufactured using Grade 5 steel material to an outside diameter of 71MM, width of 19MM, and ga...

  These custom stamped brackets were manufactured using tempered .063" thick steel sheet material for our specialty OEM customer.  A nu...

  These custom internally threaded stainless steel ball studs were manufactured using 303 stainless steel material with 12-40 internal threa...

  These custom 1/4-20 A286 stainless steel hex nuts were manufactured domestically for our aerospace/drone manufacturing customer.  DFARS co...

  These custom automotive fastener kits included grade 5 5/16-24 partial thread hex bolts, split lock washers, and grade 5 hex nuts.  All pa...

  These custom 3-wave washers were manufactured domestically in the USA using DFARS compliant 301 stainless steel material.  The outside dia...

  These custom torsion springs were manufactured using .090 diameter music wire material with .80-.95% carbon content and 230-399 ksi tensil...

  These custom coupling nuts were manufactured using mild steel material with zinc clear finish.  1/2-13 thread was tapped all the way throu...