Search Our Custom Fasteners

Tuesday, June 6, 2023

Custom A286 Socket Head Captive Shoulder Screws

 

Custom A286 Socket Head Captive Shoulder Screw Manufacturers
These custom A286 socket head captive shoulder screws were manufactured domestically with full certs and FAIR using DFARS compliant A286 material hardened to minimum ultimate tensile strength of 1100 MPA.  The captive shoulder diameter was set to 1.64mm +0/-.05, 2-56 thread length at 3.78", and overall length under the head at 9.04mm +0/-0.76.  Parts were finished with Passivation per AMS2700, Method 1, Type 2, Class 4.

Friday, May 5, 2023

Custom 416 Stainless Steel Precision Shoulder Pins

 

Custom 416 Stainless Steel Precision Shoulder Pins
These custom precision machined shoulder pins were manufactured using 416 stainless steel material for our customer that manufactures scientific measurement instrumentation.  The shoulder diameter was set to .311" +/- .001 and the length under the flange is 1.175" +.002/-.000.  Flange diameter was set to .375" +.001/-.005 and the thickness at .020" +.000/-.002.  Full certs were provided with the parts per our customer's requirement.

Tuesday, April 18, 2023

Custom Slotted T-Bolts In 316 Stainless Steel

 

Custom Slotted T-Bolts In 316 Stainless Steel
These custom slotted T-bolts were manufactured in 316 stainless steel with plain finish based on drawings we created using provided samples.  Unlike the typical slotted drive application we see these t-bolts incorporated the slot for marking/indication purposes to signal the position of the head from the back side.  Each bolt was wrapped in protective netting to avoid damage to the head and thread during transport.  

Friday, April 7, 2023

Custom Tamper-proof Security Lag Screws

 

Custom Tamper-proof Security Lag Screws

These custom tamper proof security lag screws were manufactured using 304 stainless steel material with a 0.5" hex socket drive with a press fit security pin.  Overall length of the screw was 2.5" and the unthreaded shoulder diameter was set to .37".  3/8-7 wood screw thread was rolled to complete the parts.  

Friday, March 24, 2023

Custom Slotted Double Thread Studs

 

Custom Slotted Double Thread Stud Manufacturers
We supplied these custom slotted double thread studs to our furniture manufacturing customer.  Low carbon steel was used for the production with a black oxide finish.  3/8-16 thread was rolled on each side and the overall length measured at 47.60MM.  The part is similar to the hex socket drive version in alloy steel that we supply our automotive aftermarket OEM customers.

Friday, March 10, 2023

Custom Stainless M16 Precision Machined Hex Nuts

 

Custom Stainless M16 Precision Machined Hex Nuts
These custom stainless steel M16-1.5 H6 thread fit hex nuts were manufactured using 303 stainless steel material with NADCAP certified passivation.  Width across the flats was set to .75" and the thickness/height at .250".  Material certs and certificate of conformance was provided with the parts to our electronics OEM customer.

Sunday, March 5, 2023

Custom Grade 8 Offroad Wheel Bolts

 

Custom Grade 8 Offroad Wheel Bolt Manufacturers
These custom grade 8 wheel bolts were manufactured for our automotive OEM customer using SAE J429 material with zinc yellow finish with post plating bake.  An 82 degree countersunk feature was incorporated into the head with cold forging with 1/2-13 UNC 2B full thread below measuring 1.25" in length.  

Custom Stainless Steel UNEF Thread Precision Hex Nuts

 

Custom Stainless Steel UNEF Thread Precision Hex Nut Maufacturers
These custom 3/4-10 UNEF stainless steel hex nuts were manufactured for our electronics customer using 304 stainless steel material.  They measured .938" across the flats and .375" in height with standard chamfers on both sides.  NADCAP certified passivation was completed to complete the parts for delivery.  Full certs were available with the parts as well as a Go/NoGo plug gauge.  We ran the samples of the part twice to ensure successful testing with the thread gauges.

Wednesday, March 1, 2023

Custom Torx Drive Grade 5 Titanium Screws

 

Custom Torx Drive Grade 5 Titanium Screw Manufacturers
We supplied our high performance bicycle manufacturing customer these custom torx drive grade 5 titanium screws as an alternative to the traditional A4-80 material option.  The titanium material version offered great weight to strength ratio and also superior cosmetic options with the variety of anodizing colors.  The screws incorporated rolled M5 coarse thread at a length of .709" underneath the head.  The drive was cold formed on these parts and the balance of the head fully machined prior to thread roll.  Full certs were available with the parts.

Wednesday, February 22, 2023

MS21250-02004 12-Point Flange Bolts

 

MS21250-02004 12-Point Flange Bolt Manufacturers
These MS21250-02004 12 point flange bolts were manufactured using domestic 8740 AMS 8322P steel material heat treated to AMS 2759/1 F AMS 2759 F to reach hardness of 40-43 HRC.  The parts were finished with CAD plating per AMS-QQ-P-416E specification, Type II Class 2.  Full certs were provided with the parts to our aerospace customer per order requirements.