Tuesday, February 27, 2018
These are custom 6-lobe socket cap screws made domestically using 4037 alloy steel material. Strength was absolutely critical to our customer and the parts were heat treated to 39-43 hrc. In the absence of an available drawing for this part we had to work off samples our customer provided for all dimensional attributes. After confirming the material, strength, and dimensional requirements we had 1,000 pcs produced for our customer with a lead time of approximately 12 weeks from order confirmation. Heat treat and material certs were included with the parts.
Friday, February 16, 2018
These are one of the custom brass inserts we supply our long time customer that had production facilities in the US and in Mexico. We initially ran a test production cycle of 300 pieces for them to test in their assembly prior to committing for the full 10,000 pcs required in their first batch. Plain brass material was used and the knurled outside diameter was set at .235". Our customer was in a rush and we ran an expedited option with lead time at under 2 weeks.
Thursday, February 1, 2018
These are custom electronics standoffs we supplied to our customer at just 100 pcs for testing purposes. 2-56 thread was incorporated to run all the way through the part measuring 0.32" in overall length. The thicker portion of the custom standoff measures .13 inches, with the diameter at .22 inches. Its thinner section has a diameter of .14 inches.