Wednesday, November 29, 2017
These are custom captive stainless steel screws we supplied to our construction customer, who refers to them as "Gripper Screws". Production was done domestically in the USA at approximately 5,000 pieces and a lead time of 6-8 weeks. The multi-step flat head was made using a cold heading process and the 10-32 thread was rolled at 0.2" in length. The diameter of the unthreaded shoulder was set at 0.14" +/-.015.
Tuesday, November 28, 2017
These are custom 316 stainless steel round u-bolts we supplied to our customer at a bit over 100 pieces. Lead time was at about 6-7 business days from order and material certs with certificate of conformance were provided with the parts as well per our customer's request. The inside width is 2-5/8", inside length is 5", and approximately 3-1/2" of thread are incorporated at each leg. Rush service is available upon request.
Wednesday, November 22, 2017
These are custom L brackets we provided our long time OEM customer. We initially had 100 pieces produced for testing and engineering inspection prior to a full commitment for 20,000 estimated annual usage. Plain low carbon steel material was used and the initial sample lot of 100 pcs was done within 1 week of print confirmation. The outside dimensions were 3/4 X 1/4 on the narrow side and 1/2 X 1/2 on the wider section, with 1/8" diameter holes drilled 1/2" from the 90 degree angle on each side.
Monday, November 20, 2017
These are custom flat socket head cap screws manufactured domestically using 18-8 stainless steel material. The production run was relatively low in quantity at approximately 10,000 pcs, with a standard non-expedited lead time of 6-7 weeks. Material certs, certificate of conformance, and passivation certs to QQ-P-35 were provided with the parts.
Posted by Engineered Source Inc at 12:56 PM
Wednesday, November 15, 2017
These are custom thin U bolts made domestically using 1018 plain steel material at approximately 600 pcs. Lead time for production was 6 business days and each custom round u bolt was supplied with a pair of hex nuts, flat washers, and split lock washers. Material certs and certificate of conformance was provided with the shipment per our customer's request.
These are custom ribbed neck carriage bolts we supply to one of our oldest customers. They measure 1/4-20 X 7/8 and are manufactured domestically in the USA in Grade 5 steel material, with zinc and clear finish. Production lead time is typically approximately 6-7 weeks for this custom part and all certs are available upon request.
Thursday, November 2, 2017
These are custom USA galvanized u bolts manufactured domestically using US melt steel. Our customer ordered this 1/2 X 5-1/4" together with 5 other size variations. Rush lead time was approximately 8-10 business days due to the galvanizing process. This specific version has an inside width of 3-5/8", 1/2-13 thread of approximately 1-1/2 inches on each leg, and inside length of 5-1/4". Material certs and a C of C was provided with the parts per our customer's requirements.