Search Our Custom Fasteners
Friday, January 19, 2018
These are custom small u bolts we supplied to our customer at approximately 16,000 pcs. The 1/4-20 thread was rolled per customer specifications and the zinc plating was done to QQ-Z-325. Width between the legs is set at 1.060 inches before the extended rolled thread, outside length at 1.84 inches, and thread length at .62 inches. Material was .217-.213 diameter 1010 steel per ASTM A108.
These are custom stainless standoffs made using 304 stainless steel material in accordance with ASTM A276 and passivated to ASTM A380. Approximately 100,000 pieces were produced domestically with full certifications. 4-40 thread was incorporated on both male and female parts, with the male part measuring .750 inches and female hex measuring .320 inches in length. Width across the flats on the hex measures .250 inches.
Sunday, January 7, 2018
These are custom 316 stainless hex bolts made domestically in the USA in 316 stainless steel material. The thread pitch made this hex head cap screw a custom production deal, at 13/16-10 fully threaded. The thread was rolled rather than cut and the head width across the flats was set to 1-1/8 inches, with the head height set to 15/32". Material certs and a certificate of conformance was available upon request.
These are custom rush order u bolts made using 304 stainless steel material. Our customer was in a huge rush and we had to get these custom square u bolts made within 2-3 days of order and shipped via next day air. 50 pieces were produced on time as promised and shipped with material certs to our customer, directly to their job site. The inside width was set at 4 inches, inside depth at 9 inches, and approximately 2 inches of coarse thread was incorporated on each leg.
Custom Modified Socket Head Screws - M4 - 0.7 X 14MM Socket Head Captive Screw in Alloy Steel Material
These are custom modified socket head cap screws in alloy steel material. Standard off the shelf M4-0.7 X 14MM socket head cap screws were modified to allow their use as captive screws with partial thread and modified head dimensions. The ground shoulder area measures 8.80MM +/- 0.3MM in length and a dimater of 3.30MM +/- 0.15MM. The head was modified to a diameter of 5.50MM +/- 0.15MM and a height of 4.0MM. Material certs and a certificate of conformance was provided with the parts per customer's specifications.