Our customer was in urgent need when she ordered this custom machined aluminum hardware and was having a hard time finding anyone to run a small quantity while maintaining a fast turnaround. We were able to come to the rescue with 24 total pieces and 16 days of lead time to get the parts completed. This was done without an additional rush charge that could further cut this lead time to 1 week. 6061 aluminum material was used and M6-1.0 male and internal thread was incorporated on all the components. The parts with the male thread included a slotted drive on the head, which is absent on the other two accompanying parts.
Our architectural element construction customer ordered approximately 4,000 pcs of these custom large stainless steel spacers. 5/16-18 thread was incorporated internally, 1-1/4 inches of thread min on each side. The gap between the two sides of thread was drilled all the way through for improved production time, allowing the entire part to be drilled through and then each side tapped on both sides. The outside diameter was set at 1/2" and the overall length at 3". Tolerances on all dimensions were +/- .015". 303 stainless steel material was used for production and material certs are available upon request.