Custom Stainless Steel Locking Tee Nuts

 

These custom locking tee nuts were manufactured using 304 stainless steel material and were offered in both plain and glass bead blast finish.  It took a few tooling adjustments to finally get the locking tooth feature just right and they are internally threaded all the way through with 1/4-20 thread.  The outside diameter of the flange is set to 19MM and overall height to 12MM.  Full certs were provided with the parts.

Metric Custom Long Socket Head Screws

 

These custom socket head screws were manufactured to our customer's drawing with a long length of 289MM under the head, with half of the length threaded with rolled thread.  The screws were made to class 8.8 specification with a standard hex socket drive and coarse M6 diameter thread.  Material certs were available with the parts per our customer requirements.

Custom Automotive Black E-Coat Shaft Collars

 

These custom automotive shaft collars were manufactured using Grade 5 steel material to an outside diameter of 71MM, width of 19MM, and gap of 5MM.  M8 - 1.25 thread was tapped on both sides for the socket head assembly bolts.  The shaft collars were finished with black color E-coating and individually packaged for optimal protection in transit.  Full level 3 PPAP documentation was provided with the parts per our customer's requirements.