Custom Long Stainless Steel Dowel Pins - 303 Stainless Steel

 

These custom long stainless steel dowel pins were manufacture domestically using 303 stainless steel material.  The diameter was set to 2.002mm to 2.008mm and the length was set to 100mm +/-.01mm.  Full certs were provided with the parts and thorough QC testing was done on the straightness.

Custom Double Thread Lag Screws - 1/2 X 10.75"

 

Production of these custom double thread lag screws for our construction customer was run in batches of 50,000 pieces using medium carbon steel material with zinc + clear finish.  Overall length measured 10.75" +/- 0.20" and 1/2-6 lag screw thread was incorporated at one side, with the other side using rolled 1/2-13 thread.  Approximately 5.5" of lag thread was designed into the part and 1.2" of the machine screw thread.  The crimped shoulder was set to a height of .37" +/-.02" and a length of .625" to allow use of a wrench during the application.  

Grade 12.9 Custom Shoulder Bolts - Metric With Plain Finish

We supplied these Class 12.9 custom shoulder bolts to our aftermarket automotive OEM customer.  The shoulder measures M8 X M6 and the thread is set to M6 X 1.0.  Production typically runs in batches of 10,000 pieces per run and the finish is thermal black oxide.  Full certs are available with the parts upon request.

Custom Hardened Dowel Pins - SAE 52100 Steel Material

 

We supplied our automotive manufacturing customer these custom hardened dowel pins in SAE 52100 steel material, heat treated to reach 81.0 - 83.5 HRA.  The diameter was ground to 7.000MM +/- .005MM and the length was set to 32.0MM +/- 0.2MM.  The pins were manufactured domestically in the USA and full certs were provided with the shipment.