These custom long 316 stainless steel screws were manufactured domestically using a broached socket drive and cut threads to allow for the fast production turnaround required on the project. The 316 stainless steel raw material was required to be DFARS compliant. 8-32 thread was incorporated at a length of approximately 1-1/8" and overall length underneath the head is 6". All dimensions outside of the thread length were done per standard IFI dimensions. Full certs were provided with the parts per customer request.
Search Our Custom Fasteners
Monday, March 8, 2021
Custom Long 316 Stainless Steel Screws
Labels:
316 stainless screw factories,
316 stainless screw manufacturers,
custom 316 stainless screws,
custom long stainless screws
Location:
Los Angeles, CA, USA
Tuesday, February 9, 2021
Custom Hex Automotive Ball Studs - Zinc Yellow Finish
We had 25,000 pieces of these custom automotive ball studs produced in 1215 steel material with heat treat hardening to 25-34 HRC and zinc yellow finish. The across the flats dimension on this ball stud was set to measure .311 +/-.01". Overall length measured .975" with the 1/4-28 thread taking up approximately .400". We supply this ball stud on revolving annual blanket order basis with the initial production lead time at 4-5 months from order confirmation.
Labels:
ball stud factories,
ball stud manufacturers,
custom automotive ball studs,
custom high strength ball studs
Custom Mild Steel Washers - Plain Finish
These custom mild steel washers were manufactured with plain finish to work on a T-bolt and nut assembly for an agricultural equipment application. Medium steel material was used for additional strength and the inside diameter set to .406" +/-.015" to fit over 3/8-20 thread on the bolt. The outside diameter was set to .815" +/- .015" and thickness set to .086"-.132". Full certs were made available with the parts and.
Labels:
custom grade 5 washers,
custom medium carbon steel washers,
custom mild steel washers,
custom washer factories,
custom washer manufacturers
Location:
Santa Ana, CA, USA
Thursday, January 28, 2021
Custom Stainless Shoulder Captive Screws - Cold Drawn 303 SS
These custom stainless shoulder captive screws were manufactured using cold drawn stainless steel bar stock material with a cold headed head and drive. 6-32 thread was incorporated at 5mm +/- 0.5, with a lead in chamfer per print. The head was made to 8mm in diameter and 1.5mm in height, with the step shoulder measuring 3.6 in diameter by 2mm in length. The long captive shoulder was set to 2.3mm +0/-0.2 diameter. Overall length is 31.5mm and the head featured a #2 phillips drive.
Labels:
captive screw factories,
captive screw manufacturers,
custom captive bolts,
custom captive screws,
shoulder bolt manufacturers,
shoulder screw manufacturers
Location:
Santa Ana, CA, USA
Tuesday, January 26, 2021
Custom Knurled Slotted Thumb Screws - Steel Zinc Material
These custom knurled slotted thumb screws were manufactured at 5,000 pieces using low carbon steel material with zinc clear finish. 6-32 thread was incorporated at .375" length underneath the head. Knurled head diameter was set to .313" and head height to .188". The slotted drive was .035" +/-.005" deep and .045" +/-.005" wide. Our customer used these custom screws in their electronics assembly process. Full certs were made available to our customer upon request.
Labels:
custom knurled bolts,
custom slotted thumb screws,
custom thumb screws,
knurled screw manufacturers,
knurled thumb screw manufacturers,
thumb screw factories
Location:
Santa Ana, CA, USA
Thursday, January 21, 2021
Custom Grade 5 Hex Nuts - SAE J995 Steel
These custom grade 5 hex nuts were manufactured using SAE J995 steel material for an agricultural equipment operator, with black oxide finish. Width across the flats was set to .551-.563" and the height was specified at .401-.402". The internal thread pitch was the oddest part for the custom nut, with a 3/8-20 pitch and 2B thread fit. Full certs were provided with the parts.
Location:
Los Angeles, CA, USA
Thursday, January 14, 2021
Custom 4340 Alloy Steel Dowel Pins - Aerospace Applications
These custom 4340 alloy steel dowel pins were produced domestically at a bit over 3,000 pieces for an aerospace application. The raw material was to be per AMS 6414 or AMS 6409 and the pins measure .1179 +0.0000/-.0004 by .400 +/- .0030. Full certs were provided with the material, including material certs, certificate of conformance, and a FAIR. Parts were released over a 12 month period using a blanket purchase order agreement.
Labels:
aerospace pin factories,
aerospace pin manufacturers,
custom 4340 pins,
custom aerospace pins,
custom alloy steel dowel pins,
custom precision dowel pins
Location:
Los Angeles, CA, USA
Thursday, January 7, 2021
Custom Grade 8 T-Bolts With Black Oxide Finish
These custom grade 8 T-bolts were produced using SAE J429 material to Grade 8 specifications, finished with a black oxide process. An existing sample was used to recreate the design and tooling for the head shape. 3/8-20 unorthodox thread pitch was rolled at thread length of .8" minimum. Overall length of the part was set at 1.212" +/-.01" and the max head diameter reached .757" +/-.01". Full certs were provided with the parts.
Location:
Los Angeles, CA, USA
Custom Painted Self Piercing Crimp Screws - 12 X 1/2 Steel Zinc
These custom painted self piercing crimp screws were manufactured in Taiwan with a self crimping serrated washer head feature ideal for thin sheet metal applications. The exposed washer and head surfaces were painted to match our customer provided samples after going through a cleaning process to remove any excess oil or wax. Lead time for most sizes with painted head is 3-4 weeks from order. Self drilling variation is also available upon request.
Labels:
crimp screws,
custom painted bolts,
custom painted screws,
custom screw manufacturers,
custom self piercing screws
Location:
Los Angeles, CA, USA
Thursday, November 5, 2020
Custom Stainless Steel Fully Threaded Lag Screws
We had 10,000 pieces of each size of these custom stainless steel fully threaded lag screws supplied to our construction customer. 304 stainless steel material was used and the parts were manufactured to ASME B18.2.1 other than the full thread feature requirement. Tensile strength was required to surpass the minimum 90,000 psi requirement and both the material composition and the tensile strength (axial) were tested at a third party lab with full certs. The two sizes pictured here are the 3/8-7 X 4" and 3/8-7 X 5.5". The finish on both sizes is Geomet 321 with Plus L top coat.
Labels:
custom full thread lag bolts,
custom full thread lag screws,
custom stainless lag screws,
lag bolt manufacturers,
lag screw factories
Location:
Los Angeles, CA, USA
Subscribe to:
Posts (Atom)