Custom 416 Stainless Precision Threaded Sleeve Nuts

 

These custom threaded sleeve nuts were manufactured for our aftermarket gun OEM customer using 416 stainless steel material and 6AL-4V Titanium material.  The parts were fully machined and incorporated internal 3/4-20 UNEF-2B left hand thread.  .81" across the flats wrench grooves were designed into the sleeves to allow for easier assembly and removal.  Full certs were included with the parts per customer requirements.

Custom 6061 Aluminum Precision Flat Head Pins

 These custom miniature aluminum flat head pins were manufactured for our specialty OEM customer using 6061 aluminum material with plain finish.   The flat head measured 2MM in diameter and .19MM in height, with the shoulder extension set to 1.308MM diameter by 2.174MM in length.  Material certs were available with the parts.

Custom 1/2-13 x 2 410 Stainless Socket Head Screws

 

These custom 1/2-13 X 2 socket head cap screws were manufactured for our aerospace engineering customer using DFARS compliant 410 stainless steel material heat treated to 108,000 psi tensile strength.  The entire part was machined from bar stock to expedite the production lead time and the hex recess drive was broached as well vs cold forged.  Full certs were included with the parts per customer requirements.