Custom 3/4 X 6" 316 Stainless Steel Threaded Rod Studs

These are custom 3/4 inch diameter coarse threaded studs supplied to our customer at a small quantity of 40 pieces.  The studs were cut and chamfered on both sides using 12 foot 316 stainless steel threaded rod.  Larger quantities of custom threaded studs can be supplied on a blanket purchase order basis.

Custom 5/16 X 7-1/2 Square Stainless Steel U-Bolt

This is a custom square u-bolt we supplied to a customer at 200 pieces.  Parts were manufactured locally in Southern California using 304 stainless steel, with a 5/16 diameter and coarse threaded 2 inch sections on each leg of the u-bolt.  The inside width is 6-1/8 and the inside depth is at 7-1/2 inches.  Material certs were provided with the parts per customer's instructions.

Custom 5/8 X 33 Inch U Bolts In 304 Stainless Steel

These are large custom stainless u bolts we supplied to our customer with expediting processing - the inside depth on these parts is 33 inches, with the diameter and thread pitch at 5/8-11.  3.5 inches of thread was incorporated on each side and the inside width was 8-3/5 inches.  This was a small quantity order of just 6 pieces.

Special Phil Pan Machine Screws With Black Oxide Finish and Thread Locking Patch

We supply countless parts to our diverse customer base that incorporate one or more secondary services and finishes.  This stainless steel 4/40 X 3/16 phil pan machine screw is a good example.  It is made using 18-8 stainless steel and is then run through a Class 2 Black Oxide treatment.  The final step is a nylon 11 thread locking patch application.  We supply these specific machine screws to our customer on a revolving annual blanket purchase order basis.

Custom 6-Lobe Stainless Steel Socket Sheet Metal Screw

This is unique custom 302 stainless steel #4-24 X .900 socket sheet metal screw.  It incorporates a 6-lobe socket drive and a partial thread with a AB type point.  These special sheet metal screws are supplied at quantities of approximately 2,000 pieces per order and carry a lead time of 6-8 weeks.  They are passivated in the final stage of the manufacturing process and are made in the USA.

Custom 316 Stainless Steel Threaded Studs

This is another 5/8-11 threaded stud made using 316 stainless steel material, at 10" lengths.  Similar to the 6" version discussed in the previous entry these studs were also made with a 1 week lead time.  The quantity was higher however, at 150 pieces total at 10" lengths.  Higher quantities can be set up for annual or 6 month blanket purchase orders as well.

Custom 5/8 X 6 Threaded Studs in 316 Stainless Steel

We supply our customer base a large variety of custom made threaded rod studs made using 316 stainless steel.  This particular 5/8 X 6 threaded stud, with coarse thread, was supplied at a quantity of 100 pieces with a lead time of approximately 1 week.  The threaded studs are cut from 10 foot 316 stainless material and then chamfered on both ends for optimal use.

Custom Stainless Steel Shim Washers

This is one of the number of shim washers we carry, all of which are made domestically in the USA.  It's dimensions are 2.198 on the inside diameter, 2.647 on the outside diameter, and thickness of .060.  Tolerances on these custom stainless steel shim washer inside and outside dimensions is +/- .010 inches, and +/-.004 on the thickness.  All of the special shim washers we currently carry are supplied to our customers on a annual blanket purchase order basis.

Custom Square Low Carbon Steel Washer

This is the third component of the thee piece assembly shown below that we supply our customer on a blanket purchase order basis.  It is manufactured overseas using Q195 low carbon steel material, with plain and light oil finish.  Approximately 1.96" across both directions, this square washer is .600" thick with a tolerance of +/- .06".

Custom Glass Bead Nylon Insert (Thin Pattern) Lock Nuts

These special made thin pattern nylon insert lock nuts comprise three different sizes we sell to our long time customer on an annual blanket purchase order basis - the sizes covered are 1/4-28, 3/8-24, and 5/16-24.  The parts are made overseas with our long time trusted factory source and are put through a glass bead, aluminum oxide and oil treatment prior to further inspection and shipment to our customer.