Search Our Custom Fasteners

Tuesday, February 5, 2019

Custom V Bolts In Steel Zinc Material - 8-32 Thread

Custom V Bolts In Steel Zinc Material - 8-32 Thread
These are 8-32 custom V bolts we had domestically produced for our customer.  Initially 12 pieces were run for prototype testing purposes prior to full production order.  The inside length to the bottom of the V is 1" and .625" between the legs.  0.6" of 8-32 thread is incorporated on both legs.  One thing to note with this type of bent part is that the threaded areas are clamped during the bending process - at minimum this results in a small visual dent in the threads and at worst, if over clamped the thread can be damaged to the point of creating issues running the mating parts.  We carefully inspect the parts to make sure this latter issue is avoided.  Unfortunately, there is no way to completely avoid grabbing on to the threaded areas for mass production that we have seem, without of-course limiting the amount of thread on each leg.

Our long standing relationships with production facilities all over the United States and abroad based on decades of custom hardware & fastener production history, in combination with the flexibility of blanket purchase arrangements, allows us to fully cater to the customer’s hardware specification and procurement requirements.

Engineered Source Inc
Custom V Bolts & Related Products

Orange County - Los Angeles - Inland Empire - San Diego - Southern California - Cont. United States - Mexico - Canada

No comments:

Post a Comment