Custom Stainless Pin With One Side Diamond Knurled

Similar to the other knurled pin we supply, this is a stainless steel pin manufactured in the USA with a single diamond knurled side.  Made the same way, the knurling is done aggressively to push the material and expand the outside diameter beyond that of the smooth shoulder portion.  The pin measures approximately .980 in length +.005/-.000 and the outside diameter of the smooth shoulder is .118 +/-.0005.  The outside diameter of the knurled side however is .150 +/-.005.  32-35 pitch is used on the knurling.

Custom Diamond Knurled Stainless Steel Pins

These are stainless steel knurled pins made to a customer's print at a quantity of just over 500 pieces.  They measure approximately .800" in length at a diameter of .118".  Ofcourse the most interesting requirement is the diamond knurling of .150" at each side that is intended to bite into the plastic setting.  In order to increase the diameter at the knurled ends and allow for better locking into the plastic the factory adjusted their method to allow for very aggressive knurling, thereby pushing the material further and increasing the overall diameter at both sides.  No machining or deburring was done on either side after this process to preserve this increased diameter.