Custom Stamped L Brackets - 3/4 X 3/4 X 3/4 In Steel Zinc At .125" Material Thickness

These custom stamped L brackets are made using low carbon steel material with zinc plated finish.  .125" thick material is used and the outside dimensions are 3/4" for each leg, as well as the width of the bracket length itself.  Production takes place in the USA and we typically run approximately 10,000 pcs at a time for this stamped part.  Our customer uses it in combination with two other custom stamped brackets used to assemble decorative paneling.

Custom L Brackets In Plain Steel Material - 3/4" x 1/2"

These are custom L brackets we provided our long time OEM customer.  We initially had 100 pieces produced for testing and engineering inspection prior to a full commitment for 20,000 estimated annual usage.  Plain low carbon steel material was used and the initial sample lot of 100 pcs was done within 1 week of print confirmation.  The outside dimensions were 3/4 X 1/4 on the narrow side and 1/2 X 1/2 on the wider section, with 1/8" diameter holes drilled 1/2" from the 90 degree angle on each side.