Custom Double End Shoulder Studs - A193 B7 Material

These custom double end shoulder studs were manufactured domestically using B7 material with plain finish.  1" coarse thread was incorporated on one side at a length of 1-1/4".  1-5/8" of 3/4" coarse thread was cut on the other side of the stud, with the shoulder machined to a diameter of .75" +/- .01".  Overall length of the double ended stud is 4" +/-.01" and in plain finish this part can be produced relatively quick with a lead time of 2-4 weeks depending on the production volume required.  Material certs were provided with the parts per customer's requirements.

Custom Internally & Externally Threaded Studs - Medium Carbon Steel Material

Production of these custom internally and externally threaded studs was run at approximately 10,000 pieces, in medium carbon grade 5 equivalent steel material.  The specific hardness requirement was set to 25-35 HRC.  The custom threaded studs had an overall length of .75" +/.02" with a 45-50 degree tapered point on one side.  Slotted drives were incorporated at both sides for optimal flexibility in our customer's application.  1/2-13 thread was rolled on the outside and 1/4-20 thread tapped all the way through.

Custom Stainless Steel Double End Studs - 1/4-20 & 10-32 Thread in 304 Stainless Steel

We provided our customer a small batch of these custom stainless steel double end studs at just over 100 pieces.  They wanted to replicate existing parts but did not have any drawings or prints.  We used a sample piece provided to replicate all dimensions to a +/-.01" tolerance.  1/4-20 thread is incorporated on the larger diameter side and 10-32 on the other, with approximately half the thread turned down into a dog point.

Large Double End Studs - 1"-8 Partially Threaded Studs In Plain B7 Material

We supplied our customer with 3 different sizes of these large double end studs: 160 pieces of 1"-8 X 5.125" with 1-1/2" and 1-3/4" of thread lengths, 30 pieces of 3/4"-10 X 3.8125" with 1" and 1-1/4" of thread lengths, and 12 pieces of 1-1/8"-8 X 5-3/4" with 1-7/8" and 1-1/4" thread lengths.  All threaded studs were made domestically using B7 material with light oil plain finish.  One side of each double end stud was stamped with the B7 material designation.  Lead time to produce all three sizes was approximately 5 business days from order confirmation.

Custom Double End Studs In 18-8 Stainless Steel Material - with AA1096 microspheres thread locking patch

These are custom double end studs made using 303 stainless steel (18-8 stainless steel) for our electronics manufacturing customer.  Domestically made at approximately 4,000 pcs these parts were made to the drawing shown below with AA1096 microspheres thread locking feature one the shorter threaded end.  1/4-20 thread was incorporated on the long threaded portion, while 10-24 was used for the shorter end with the thread lock patch.  A #2 square drive was broached on the 1/4-20 side as well.

Custom Stainless Threaded Studs - 6-32 X 7/8 Fully Threaded 18-8 Stainless Steel Studs

These are custom stainless threaded studs, fully threaded at 6-32 diameter and pitch.  They were cut and chamfered on both sides to 7/8 inch lengths and production was run at 550 pieces +/- 10%.  Lead time for these custom threaded studs was approximately 4-6 weeks but faster options were available to our customer if urgent need arose.  All parts were passivated to complete the production process and were supplied with material certs and a certificate of conformance.

Custom Stainless Steel Threaded Studs - 6-32 X 7/8 In 18-8 Stainless Steel Material

These custom stainless steel threaded studs were supplied to our custom at just 550 pieces with a lead time of 1-2 weeks from confirmed order.  The threaded studs were manufactured domestically using 18-8 stainless steel material with passivation to complete the production process.  They measure 6-32 X 7/8" and the internal part number is FTS-006014-I.

Special Threaded Studs in 316 Stainless Steel

Special threaded rod products like these custom cut 3/4 X 9 threaded studs in 316 stainless steel are a daily routine for us.  We supply our diverse customer base a large variety of custom made u bolts, custom made square u bolts, bent threaded anchor bolts, etc.  A number of different raw material choices are at your disposal and countless more specialized materials available upon request at slightly longer lead times.