Custom Bent Eye Bolts & U-Bolts In A36 Steel Material - 3/4-10 Thread

These custom bent eye bolts were produced together with matching large round u-bolts in A36 material.  3/4-10 thread was incorporated on both parts and 6 eye bolts were produced together with 21 u-bolts, a relatively small production run.  Parts were produced within 4 days of order confirmation but could have been done faster with an expedited rush order and fee if necessary.  The diameter of the eye was set to 1-1/2" and the thread length was set to 2-1/2".  We were approx 1/4" shy of the thread length requested however as going beyond that would encroach onto the bending material.  The round u-bolts were made to 3-1/2" between the legs and 4" for the inside length.  1" of 3/4-10 thread was incorporated on each leg.

Custom Large Plain Steel U-Bolts - Round 3/4-10 Diameter In Variety Of Sizes

These are 9 different custom large plain steel u-bolts we supplied our customer in the Kansas City, MO area.  Quantities ranged across the nine different sizes but all shared the 3/4-10 diameter and thread pitch, as well as the plain A36 steel material.  The largest size pictured with Leonid here measured 42 inches on the inside width and 39-1/16 on the inside length.  8 inches of 3/4-10 thread was incorporated on each side.

Custom Large 316 Stainless U-bolts - 1/2 X 18" Round Custom U-bolts With 4 Hex Nuts Each

These are custom large 316 stainless u-bolts we supplied our customer in San Diego.  They specialize in waterworks related construction and specifically needed 316 stainless steel material with a fast turnaround.  We were able to ship the parts within 4 days of order confirmation.  1/2" diameter bar stock was used with 2 inches of coarse thread on each leg, with inside width measuring 16.25" and inside length at 18".