Search Our Custom Fasteners

Tuesday, June 28, 2016

Special Male/Female Flush Mounting Hardware

Special/custom male female flush mount stamped hardware in steel zinc material - engineered source is a supplier of special and custom stamped mounting hardware - covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, United States, Mexico

Engineered Source supplies countless special stamped parts, from a number of different custom stamped washers to specialized stamped hardware items like these paired male and female flush mounting hardware parts.  They are stamped at a domestic US based factory that we have been working with for over 10 years and supplied on an as-needed blanket purchase order basis.

Special Slotted Fillister Captive Screw

Special custom 8-32 X .47 slotted fillister captive screw in 18-8 stainless steel - engineered source is a supplier and distributor of custom/special captive screws in stainless steel material - covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, United States, Mexico

We supply custom made captive screws in both small and large quantities.  This is a special 8-32 X .47 slotted fillister captive screw made using 304 stainless steel.  It is manufactured in the United States and can be supplied to order in as few as 10 pieces.

Thursday, June 23, 2016

Special One Way Round Head Tamper Proof Machine Screw

Special/custom tamper proof one way round head stainless machine screw - engineered source is a supplier of special and custom stainless steel tamper proof one way round head machine screws - serving Santa Ana, Orange County, Los Angeles, San Diego, Inland Empire, California, United States, Mexico

Engineered Source supplies a number of different tamper proof fastener types in a variety of materials, both standard off the shelf parts and special to print fasteners like this one way round head machine screw.  These parts are 4-40 X 1/4 and were manufactured in the United States using 302 stainless steel material.

Special Composite Cork Stamped Parts

Special/custom composite cork stamped parts and washers - engineered source is a supplier and distributor of custom/special stamped fastener parts and related hardware like this composite cork tab - covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, United States, Mexico

We supply our customer based with a wide variety of custom stamped parts, from standard steel/zinc washers to the more odd composite cork stamped parts shown here.  This item is made custom to the customers order at .062 thickness and .63 diameter, and is manufactured in the United States.

Monday, June 20, 2016

Custom Stamped Automotive Brackets

Special/Custom stamped sheet metal parts for automotive applications - Engineered Source is a supplier and distributor of custom and special stamped metal hardware - serving Santa Ana, Orange County, Los Angeles, San Diego, Inland Empire, California, United States, and Mexico

These special stamped parts are provided in small quantities to our long time customer that applies the brackets in their automotive assembly process.  The brackets are made in the USA using ASTM A1008-10CS Type A cold rolled sheet material and depending on the customer needs the lead time can be as short as 1 week.

Friday, June 17, 2016

Special 410 Stainless Steel Fully Threaded Hex Cap Screw


This is an M6 X 1.0 X 60MM hex head cap screw that is fully threaded per customer's specifications and manufactured in the United States using 410 stainless steel.  Parts are then heat treated for required hardness.  A similar part is supplied for the same customer at M5 diameter, which will be shown as a separate entry.  Both parts are supplied on a one-time release basis at 5,000 pieces each.

Special Music Wire Extension Spring

Special/custom music wire extension springs - engineered source supplies custom and special compression and extension springs made using music wire material - covering Santa Ana, Orange County, Los Angele, Inland Empire, San Diego, California, United States, and Mexico

We supply our customer base a number of different custom made compression and extension springs, typically on a blanket as-released purchase order basis.  This special spring part is an extension spring made using pre plated .022 galvanized music wire material.  It is usually supplied to our customer at 5,000 piece increments.

Monday, June 13, 2016

Special Metric Hex Head Fully Threaded Cap Screw in 410 Stainless Steel

Special/custom metric 410 stainless steel hex head cap screw/bolt - engineered source is a supplier and distributor of special & custom 410 stainless steel hex head screws/bolts, both metric and inch - covering Santa Ana, Orange County, Los Angeles, San Diego, Inland Empire, San Diego, California, United States, Mexico

This is an M5 X 0.8 X 60MM hex head cap screw that is fully threaded per customer's specifications and manufactured in the United States using 410 stainless steel.  Parts are then heat treated for required hardness.  A similar part is supplied for the same customer at M6 diameter, which will be shown as a separate entry.  Both parts are supplied on a one-time release basis at 5,000 pieces each.

Thursday, June 9, 2016

Special Flat Washer in Steel Zinc

Special/custom flat washer in steel zinc - Engineered Source is a supplier and distributor of special washers in steel and stainless steel material - covering Santa Ana, Orange County, Los Angeles, San Diego, Inland Empire, California, United States, and Mexico

This is a special steel washer made to ID of 1.504, OD of 2.187, and TH of .062 with standard tolerances in place per customer's specifications.  We supply hundreds of special washers in a variety of materials and parameters, both on an as-released blanket purchase order basis and single order release basis.  Custom washers like this typically have a lead time of 6-8 weeks from a PO.

Wednesday, June 1, 2016

Special Captive Screw With O-Ring

Special/custom stainless steel phillips pan captive screw with o-rings - Engineered Source is a supplier and distributor of special/custom captive screws with o-rings in stainless steel and steel zinc - covering Santa Ana, Orange County, San Diego, Los Angeles, Inland Empire, California, United States, Mexico

This is a special captive screw measuring 10-32 X 2-3/8 manufactured in the United States using 18-8 stainless steel material.  It has a standard pan head with a phillips drive and is partially threaded to act as a captive/panel screw.  An o-ring is incorporated on each screw to our customer's specifications.  We have carried this part on a blanket as-released purchase order basis for the same customer for over five years.