Custom Stainless Steel Button Socket Head Screws To Print

This is a custom made 8-32 X 1" button socket head screw made in the USA using 302HQ material per customer specifications.  We typically supply this part in quantities of 5,000 - 10,000 pieces and lead times vary between 5 and 7 weeks from order.

Custom 3/8-16 X 5" Round U-Bolts in 316 Stainless Steel Material

This is one of many custom round shaped u-bolts we supply in 316 stainless steel material.  The 3/8-16 threaded sections measure 1-3/4 inches on each leg and the inside width is 2-5/8 inches.  Inside depth is measured at 5 inches.  We typically supply these stainless ubolts at quantities of 100 pieces.

Custom #12 Combo Slotted/Phillips Type B Pan Head Sheet Metal Screws

We supply these custom type B sheet metal screws to a long time customer on an as-needed blanket purchase order basis.  It is a #12-11 sheet metal screw at 1-1/4 inches in length with a leader point incorporated per customer specifications.  Low carbon steel, case hardened, is used with a commercial zinc and clear chromate finish.  This custom screw is made in the USA with a lead time of 4-6 weeks.  Internal part number BCPLP-1220-B.

Custom 12.9 Alloy Metric Socket Head Cap Screws

This is a custom M8-1.25M X 24MM socket head cap screw made to print using 12.9 alloy steel with thermal black oxide finish.  4037 alloy steel was used to made these parts in the USA, heat treated to 39-45 HRC.  We supply this part on an annual revolving purchase order basis to a long time customer.  Our internal part number is CLMP8-SC.

Custom 316 Stainless Steel Threaded Weld Studs

We supply our customer base a large array of custom made to print weld studs like this 316 stainless steel reduced base weld stud.  It measures 3/4-10 X 2-1/4 and is sold to our customer on an annual as-released blanket purchase order basis.  Our internal part number is CJL-075036-J.