Custom 316 Stainless Hex Bolts - 13/16-10 X 1.75" Hex Head Fully Threaded

These are custom 316 stainless hex bolts made domestically in the USA in 316 stainless steel material.  The thread pitch made this hex head cap screw a custom production deal, at 13/16-10 fully threaded.  The thread was rolled rather than cut and the head width across the flats was set to 1-1/8 inches, with the head height set to 15/32".  Material certs and a certificate of conformance was available upon request.

Rush Order U Bolts - 3/8 X 9" Custom Square U Bolts in 304 Stainless Steel Material

These are custom rush order u bolts made using 304 stainless steel material.  Our customer was in a huge rush and we had to get these custom square u bolts made within 2-3 days of order and shipped via next day air.  50 pieces were produced on time as promised and shipped with material certs to our customer, directly to their job site.  The inside width was set at 4 inches, inside depth at 9 inches, and approximately 2 inches of coarse thread was incorporated on each leg.

Custom Modified Socket Head Screws - M4 - 0.7 X 14MM Socket Head Captive Screw in Alloy Steel Material

These are custom modified socket head cap screws in alloy steel material.  Standard off the shelf M4-0.7 X 14MM socket head cap screws were modified to allow their use as captive screws with partial thread and modified head dimensions.  The ground shoulder area measures 8.80MM +/- 0.3MM in length and a dimater of 3.30MM +/- 0.15MM.  The head was modified to a diameter of 5.50MM +/- 0.15MM and a height of 4.0MM.  Material certs and a certificate of conformance was provided with the parts per customer's specifications.