Friday, June 23, 2017
These are custom stainless steel compression springs we supply to our customer on an as-needed basis at approximately 20,000 pieces per order. The lead time is typically 4-6 weeks for full production. The stainless steel wire used is .032 in thickness and the total static length of the springs is 1 inch.
These are custom metric dowel pins we supply to our long time electronics OEM customer. They are made using alloy steel at M8 X 35MM and are tapped on one side each for M4 X 0.7M thread. The thread depth is set at 3MM and the other side is left untouched. These custom dowel pins are manufactured domestically with a lead time of 6-8 weeks.
We supplied these 5/8 diameter custom square steel u bolts to our customer at just 2 pieces for prototype purposes. Since plain C1018 steel was used for the production the lead time was just 3-4 days, which would typically be closer to 2 weeks if hot dip galvanizing or plating process was involved. The inside width measured 14-5/8, inside depth was at 12-11/16, and approximately 4 inches of coarse thread was incorporated on each leg.