Custom DFARS A286 Aerospace NAS Socket Head Bolts

 

These custom DFARS compliant NAS1352N4LE16S socket head bolts were manufactured domestically for our aerospace customer using A286 stainless steel material from France.  They measured 1/4-20 X 1" and were finished with AMS2411 Rev J silver flash plating and bake, as well as thread locking patch.  Certification with mechanical testing performed per FF-S-86 specification were absolutely critical on these parts and were included together with material certs, passivation certs, and plating certs.

Custom Metric Stainless Hex Male-Female Standoffs

 These custom metric stainless steel male/female hex standoffs were manufactured using 304 stainless steel material at 8MM across the flats on the hex.  M5-0.8 thread (6g thread fit) was incorporated on the male end at a length of 13MM and on the female side at an engagement depth of 12.7MM.  Parts were provided with factory passivation and material certs.  

Custom A286 Stainless Steel Castle Nuts

 

These are DFARS compliant custom A286 stainless steel castle nuts manufactured domestically in the USA for our aerospace customer.  They incorporate 7/16-26 2A thread and internal diameter of .328 +/- .005".  The cross slots measure .090 +/-.005" and unthreaded shoulders both measuring .394"+0.000/-.004 in diameter by .063" +/-.01.  Full certs including a FAIR are required as a part of the deliverable package.

Custom 316 Stainless Round Head Shoulder Wood Screws

 

These custom round head shoulder wood screws were manufactured at 10,000 pieces using 316 stainless steel material with plain finish.  The head/shoulder combination was cold headed and the thread rolled.  Shoulder dimensions were 3.8-4.0mm diameter by 5.5mm minimum in length, with the rolled thread at 15.88mm min usable thread.  It's round head was specified to 7.5mm-8.0mm diameter and 2.75mm-3.05mm height.  Material certs were supplied with the parts.

Custom 420 Stainless Precision Machined Components

 

These custom 420 stainless steel precision machined components were manufactured for our aerospace customer, with initial samples produced using 18-8 stainless steel for functional testing prior to full production.  Overall length was .804 +/- .005" and the flange outer diameter was set to .396" +/-.005".  Four drilled holes were incorporated at a diameter of .120" +/-.005".  Full certs with a FAIR were incorporated into the production order requirements per customer request.

Custom Hex Head Shoulder Wood Screws - Steel Zinc

 

These custom hex head shoulder wood screws were manufactured using mild carbon steel material with Zinc clear finish to our customers drawing.  The shoulder measures .180-.188" by .302-.322" in length, square to the rolled thread transition.  Thread length was set to .585-.645" and the hex head measured .244-.250" across the flats and .096-.115" in height.  Cold heading was used for the production process with turning down the threaded area prior to thread roll.

Custom Precision Machined A286 Stainless Sleeve

These custom precision machined A286 stainless steel sleeve components are manufactured domestically for an aerospace application.  Overall length is 1.5" and the sleeve incorporates 1/2-20 2A male thread and 5/16-24 2B female thread at a depth of .512".  A number of precision shoulder steps are designed into the exterior and interior of the components.  FAIR and full certs are made available with the production per customer requirements and initial fit and function test parts were manufactured using 18-8 stainless steel material.