Search Our Custom Fasteners

Friday, July 30, 2021

Custom Locating Dowel Pins For Gear Units

 

Custom Locating Dowel Pins For Gear Units
We had 500 pieces of these large custom locating dowel pins manufactured domestically in alloy steel material, with heat treat to achieve 47-58 HRC core hardness.  The original drawings were fairly aged and it was difficult to figure out how the transition point between the round and hex portions of the pins should be formed.  We ended up producing samples with two different alternative interpretations and allow the customer to test for the ideal option pictured here.  The round portion of the pin has a diameter of .625" + .0003"/-0" while the hex portion across the flats had to meet .7497 +.0002"/-0".  Overall length was set to 1.4375".  Full certs with FAIR were available with the parts.

Thursday, July 29, 2021

Custom Stamped Bent L-Shaped Bolts

Custom Stamped Bent L-Shaped Bolts

These custom stamped bent L-shaped bolts were manufactured with a cold formed/stamped stop shoulder critical to the assembly application.  5/16-18 thread was incorporated underneath the shoulder/flange feature, at approximately 14.42mm in length.  The unthreaded length measures 31mm on the outside and the flange/shoulder diameter is 17.5mm.  Zinc + clear finish was applied to complete the parts after heat treat.  Full certs were available with the parts.

Custom Knurled Nylon Insert Lock Nuts

 

Custom Knurled Nylon Insert Lock Nuts
These custom knurled nylon insert lock nuts were manufactured using SAE J995 class 8 material with zinc clear finish.  3/8-24 internal thread was incorporated with a 45 degree chamfer and a .551-.562 across the flats hex was formed over the nylon insert.  Overall length measured at .519 +/-.03" and the knurled portion measured approximately .34" in length.  This was a tricky part to tool for and to produce - it took us two sample runs to finally get everything dialed in.

Wednesday, July 28, 2021

Custom Large Stainless Steel Pins

 

Custom Large Stainless Steel Pins
We had approximately 10,000 pieces of these custom large stainless steel pins manufactured for a customer installation in Italy.  303 stainless steel was used for production and the pins measured .249" in diameter by 5" in overall length.  A slight 45 degree chamfer was added on both sides to remove any sharp edges.  This was a relatively simple part but needed to be manufactured quickly with all delivery to Italy within 75 days from order.

Tuesday, July 27, 2021

Custom Partial Thread Socket Shoulder Bolts

 

Custom Partial Thread Socket Shoulder Bolts
These custom partial thread socket shoulder bolts were manufactured for our automotive customer using 18-8 stainless steel material and cold formed 3/16 hex socket drive.  Approximately .50" of 5/16-18 thread was incorporated and the shoulder measured .312" in diameter at 1.25" in length.  The threaded section was turned down prior to thread roll operation.  

Friday, July 23, 2021

Custom Low Hex Head Grade 5 Bolts - 5/8-11 X 1

 

Custom Low Hex Head Grade 5 Bolts - 5/8-11 X 1
These custom low hex head grade 5 bolts were manufactured at 30,000 pieces for our long time customer, with zinc clear finish.  Fully threaded with 1" of 5/8-11 thread pitch these parts came with a low hex head measuring .291-.316" in height and .922-.936" across the flats.  A 15-30 degree standard chamfer was added around the corners and flats.  The narrow head height was critical for the tight constraints in our customer's assembly application.

Monday, July 19, 2021

Custom 8740 Chrome Moly Slotted Bolts - CAD Plated

 

Custom 8740 Chrome Moly Slotted Bolts - CAD Plated
These custom 8740 chrome moly slotted bolts were manufactured domestically in the USA for our aerospace customer, intended to offer min 160,000 psi tensile strength.  10-32 UNF 3A thread was incorporated and overall screw length underneath the head is .746 +.015/-.015".  A channel was formed at the bottom of the head to allow for an O-ring to be applied, allowing for a sealing screw application.  Full certs were provided with the parts per our customer's requirements.

Friday, July 16, 2021

Custom Stainless Vented Pins - 303 Stainless Steel

Custom Stainless Vented Pins - 303 Stainless Steel

 These custom stainless vented pins were manufactured domestically using 303 stainless steel material and measure .393" +/-.01 in overall length with 3/8-24 partial thread.  They are fully vented with an ID of .124 +.002/-.000.  A slotted drive (.03" across) was incorporated on the threaded side and the parts were completed with a passivated finish per MIL QQ-P-35 Type II.  Full certs were provided with the parts to comply with our customer's requirements.  

Friday, July 9, 2021

Custom 8740 Steel Phil Flat NSN-53505-01-093-0290 & NSN-5305-01-093-2450 Screws

 

Custom 8740 Steel Phil Flat NSN-53505-01-093-0290 Screws
We provided our aerospace customer two variations of these custom 8740 steel phil flat screws, made using 8740 material per MIL-S-6049 with cadmium plating per QQ-P-416 Type I Class 2.  NSN-53505-01-093-0290 measured 10-32 X .713" while NSN-5305-01-093-2450 measured 10-32 X .837".  Both parts were manufactured domestically with full certs.  

Thursday, July 8, 2021

Custom Extended Dog Point Set Screws

 

Custom Extended Dog Point Set Screws
These custom extended dog point set screws were manufactured using 4140 alloy steel material with zinc clear finish.  6-32 thread was rolled at .150" in length and a 1/16" hex socket drive was incorporated.  Overall length measured .45" and the dog point diameter was set to .097 +/- .001".  Production lead time was 12 weeks from confirmed order and full certs were available upon request.