Thursday, August 31, 2017
Custom Stainless Tamper Proof Sheet Metal Screws - 6-18 X 1/2 Oval One Way Type A Sheet Metal Screws In 18-8 Stainless Steel
These are custom stainless tamper proof sheet metal screws measuring 6-18 X 1/2 inch in length. A tamper resistant one way oval head is incorporated with type A sheet metal screw thread. We have these parts manufactured domestically at 30,000 to 50,000 pieces and release them to our customer as needed throughout the year. 18-8 stainless steel material is used on these specific one way oval screws but we also supply an identical part in 316 stainless steel material.
Wednesday, August 30, 2017
These are custom galvanized square bent u bolts we supplied to our customer at just 10 pieces on a rush basis. Due to the galvanizing process required the best we could do for these parts was a one week lead time. If the parts were plain A36 or stainless steel material instead we could reduce the lead time to as fast as 2-3 days of production. The inside width was set at 5 inches, inside depth at 7 inches, and approximately 3 inches of 3/8 coarse thread was incorporated on each leg.
These are custom round 304 stainless steel u-bolts domestically manufactured for our customer at 135 pieces. This was rush order and we were able to produce the parts within 3 days of order placement. Material certs and a certificate of conformance was provided with the parts per the customer's specific request. The inside width was set at 2-1/16 inches, inside depth at 3-1/2 inches, and 1-1/4 inches of 1/2 diameter coarse thread was incorporated on each leg.
Tuesday, August 29, 2017
These are custom Monel 400 socket head cap screws measuring 5/8-11 by 3-1/2" in length. Domestically produced with a lead time of just 4 days, the 4 pieces we had manufactured incorporated coarse cut thread and a broached socket head drive. Material certs and a certificate of conformance was provided with the parts per our customer's request.
Wednesday, August 23, 2017
These are custom grade 5 u bolts made to our customer's drawing at 500 pieces. The u-bolts were manufactured domestically in steel zinc material and heat treated to RC20. 9/16-12 rolled thread was incorporated on each leg at 1.625" in length. The overall inside length was measured at 3.875" and the inside width at 1.565". Material certs and heat treat certs were provided with the parts per our customer's specific instructions and the overall lead time was 5-6 weeks for the full order.
Monday, August 21, 2017
Custom Button Head Socket Screws With Half Dog Point - 5/16-24 X 1" In 18-8 Stainless Steel Material
These are custom button head socket screws with half dog point used in an aerospace assembly application by our long time customer. 18-8 material is used to domestically manufacture these parts and the half dog point measures .225-.235 diameter by .150-.170 inches in length. The screw itself measures 5/16-24 X 1" and we had these produced at a small quantity of just 25 pieces with rush service at 2 weeks lead time. Material certs, inspection report, and certificate of conformance was provided with the parts per our aerospace customer's specifications.
Friday, August 18, 2017
These are custom round 304 stainless steel u bolts with extra long threaded section to allow our customer to cut them down as needed for a variety of different applications. This allowed him to get better pricing on a larger quantity and still service a different length requirements. The inside width is measured at 1/2" and the inside depth is at 8-1/2 inches. Each leg has approximately 7-1/4 inches of coarse thread. Material certs were provided with the parts per our customer's request.
Tuesday, August 15, 2017
These specialty stainless steel u-bolts were manufactured domestically at 60 pieces using plain 304 stainless steel material. The 1/2-13 thread was incorporated at 1-1/4 inches on both sides with the thread cut, as opposed to rolled. Unless the customer specifically requests rolled thread we typically always use the cut thread as the default option. The inside depth measured 3 inches and the inside width is 2-1/16". A rush fee was paid by the customer to get the custom u-bolts completed within 2 days from order.
Friday, August 11, 2017
These are custom combo drive machine screws measuring 10-32 X 3/8. They are manufactured domestically using steel zinc material with production runs typically at 200,000 to 250,000. We stock and release this part to our long time OEM customer with revolving annual blanket purchase orders.
These are custom A36 steel square u bolts made to print domestically. Production is typically run at 100 pieces in plain steel without any finish or heat treat. 3/4-10 diameter and thread is used and the inside depth is measured at 4-1/4 inches. The inside width is 8 inches and approximately 2 inches of thread is incorporated on each leg. The lead time was approximately 5-7 business days from order. Our internal part number is UB075068-A.
Thursday, August 10, 2017
Monday, August 7, 2017
These are custom 17-4 stainless steel double end threaded studs made using 17-4 H1100 stainless material with heat treat required to finalize the parts. 200 pieces of the custom threaded studs were made domestically with a lead time of 2-3 weeks from confirmation. 2-1/4 inches of 1/2 coarse thread is incorporated with 1-3/4 inches of fine thread on the other side. Full material and heat treat certs were provided with the parts and our internal part number is B6070-500.
Friday, August 4, 2017
These are custom precision 316 stainless u bolts made domestically with cut threads at just 10 pieces, with a lead time of 4-5 business days. A pair of 316 stainless steel hex nuts and jam nuts were included per our customer's request. The center to center measurement was most critical on these parts for the marine application our customer was working on. 3/8-16 diameter and thread was used on the parts, with 4" as the inside depth and 2-5/8 inches of thread on each leg.
Thursday, August 3, 2017
Custom Machined Double End Studs For Aerospace Applications - 630 (17-4) AMS 5643T Material With a Drilled Hole Per Print
These are custom machine double end studs used for aerospace applications and in our case specifically for helicopter repair. 17-4 material is used and the 10-32 UNJF-3A thread is cut after the drilled hole process and machined operations are completed. A 3/32 hex recess with a .225" deep cavity is created on one side using a drill and broach approach. The drilled hole on the single threaded side measures .035 in diameter.
These are another one of the custom poly coated u bolts we supply our customer in Cleveland OH. It is made using 304 stainless steel material with poly coat for protection against vibration, heat, UV rays, uneven surfaces, and other adverse environmental conditions. The lead time from order confirmation was approximately 3 weeks. The inside width, including the poly coat material, was at 2-1/16", while the inside depth was set at 9 inches. Coarse 3/8 diameter thread was incorporated at 2 inches on each leg. Our internal part number is CUB037144-I.