Search Our Custom Fasteners

Friday, December 16, 2016

Custom 18-8 Stainless Steel Washer

Custom/specialty 18-8 stainless steel stamped washers - engineered source is a supplier of custom and specialty washers in a variety of stainless steel grades - covering Orange County, Los Angeles, San Diego, Inland Empire, continental USA, and Mexico

This is one of the countless custom to print stainless steel washers we supply on a revolving blanket purchase order basis - it is a domestic made 18-8 stainless steel flat washer measuring .170 X .500 X .030.  Tolerances on the OD are +/-.0050 and the ID is maintained within .170-.177 per the customer specific requirements.  The thickness on the washer ranges between .030 and .040 inches.

Thursday, December 15, 2016

Specialty O-Ring Sealing Machine Screws

custom/specialty o-ring sealing machine screws - engineered source is a supplier of specialty custom and standard screws with built-in o-rings to allow for sealing feature - covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, United States, and Mexico

We provide our customer base a diverse array of specialty sealing screws like this 6-32 X 3/8 phillips pan head machine screw in 18-8 stainless steel with built-in buna o-ring.  The sealing feature can be incorporated using a variety of different materials and methods, depending on the customer's specific requirements.  We supply these specific screws to our customer on a revolving blanket purchase order basis.

Custom 1/2 X 15-3/8 Galvanized ASTM A36 Steel U-bolts

custom special galvanized astm A36 steel round u-bolts - engineered source is a supplier and distributor of custom round galvanized steel u-bolts - covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, United States, and Mexico

These are custom round u-bolts made using A36 galvanized steel material with just 1 inch on the inside width and 1-1/2 inches of 1/2 coarse thread.  They are used in specialized fencing applications and supplied in quantities ranging from 20-100 pieces at a time, with a few different lengths per our customer requirements.  Material certs are supplied with the parts with each shipment.

Thursday, December 8, 2016

Custom 4-40 X 3/8 Slotted Flat Machine Screws in Copper 110 Material

Custom/specialty 4-40 X 3/8 copper 110 slotted flat head machine screws - engineered source is a supplier and distributor of custom/specialty copper 110 slotted flat machine screws - covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, United States, and Mexico

This is another 4-40 slotted flat machine screw we supply our long time customer, typically in small batches of 50-100 pieces per order.  They are 3/8 in length and are manufactured in the United States using Copper 110 material.  Material certs are provided with each shipment and blanket purchase order arrangements are always doable.

Monday, November 28, 2016

Custom 1/2 X 25-13/16 Hot Dip Galvanized ASTM A36 Steel U-Bolts

CUSTOM SPECIALTY 1/2 X 25-13/16 ASTM A36 GALVANIZED ROUND U-BOLTS - ENGINEERED SOURCE IS A SUPPLIER AND DISTRIBUTOR OF CUSTOM ROUND U BOLTS IN GALVANIZED ASTM A36 STEEL MATERIAL - COVERING ORANGE COUNTY, LOS ANGELES, INLAND EMPIRE, SAN DIEGO, CALIFORNIA, UNITED STATES, AND MEXICO

This custom galvanized A36 u-bolt was provided at a quantity of 140 pieces on an expedited delivery basis, with a lead time at at just 7 business days from order.  Approximately 2 inches of coarse 1/2" thread were incorporated on the legs of the u-bolt, with the inside width measuring 8-3/4 inches.

Wednesday, November 23, 2016

Custom 1/2 X 20-15/16 Zinc Plated Round ASTM A36 U-bolts

Custom 1/2 X 20-15/16 ASTM A 36 round U-bolts zinc plated - engineered source is a supplier and distributor of custom/special round u bolts made using A36 steel material - covering Santa Ana, Orange County, Los Angeles, San Diego, Inland Empire, California, United States, and Mexico

We supplied these custom coarse thread 1/2 X 20-15/16 round U-bolts to a customer at 140 pieces with a lead time of approximately 2 weeks.  ASTM A36 material was used and material and plating certs were made available to the customer with the parts.  3 inches of thread was incorporated on each leg and the inside depth was 8-3/4 inches.  Inside width was requested at 4-9/16 inches.

Monday, November 21, 2016

Custom Drilled Stainless Steel Socket Set Screw

Custom Drilled Stainless Steel Socket Set Screw - engineered source is a supplier and distributor of custom/special set screws in stainless steel - covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, United States, and Mexico

This is a custom made to print socket set screw made using 303 stainless steel, passivated to Mil QQ-P-35 Type II.  It measures 10-32 X .415" +/-.010 and is drilled at a diameter of .126 +.005/-.000 to a depth of .250 +/-.005.  We supply them at orders of approximately 1,000 pieces per release and the custom parts are made domestically in the USA.

Custom Trilobular Thread Forming Hex Washer Head Screws

Custom indented hex washer head trilobular thread forming screw in steel zinc - engineered source is a supplier and distributor of custom made thread forming trilobular hex washer head screws - covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, United States, and Mexico

We supply our diverse customer base hundreds of custom made to print trilobular thread forming screws in both steel and stainless steel materials.  This particular special thread forming part measures 10-24 X 3.19" and is manufactured to print overseas in Taiwan in steel/zinc; it is then supplied to our customer on an as-released blanket purchase order basis.

Wednesday, November 16, 2016

Custom Stainless Pin With One Side Diamond Knurled

Custom/special diamond knurled stainless steel pins - Engineered Source is a supplier and distributor of custom knurled pins - covering Orange County, Los Angeles, San Diego, Inland Empire, California, Continental United States, and Mexico

Similar to the other knurled pin we supply, this is a stainless steel pin manufactured in the USA with a single diamond knurled side.  Made the same way, the knurling is done aggressively to push the material and expand the outside diameter beyond that of the smooth shoulder portion.  The pin measures approximately .980 in length +.005/-.000 and the outside diameter of the smooth shoulder is .118 +/-.0005.  The outside diameter of the knurled side however is .150 +/-.005.  32-35 pitch is used on the knurling.

Tuesday, November 15, 2016

Custom Diamond Knurled Stainless Steel Pins

Custom/special diamond knurled stainless steel pins - engineered source is a supplier and distributor of custom made diamond knurled pins in stainless steel - covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, United States, and Mexico

These are stainless steel knurled pins made to a customer's print at a quantity of just over 500 pieces.  They measure approximately .800" in length at a diameter of .118".  Ofcourse the most interesting requirement is the diamond knurling of .150" at each side that is intended to bite into the plastic setting.  In order to increase the diameter at the knurled ends and allow for better locking into the plastic the factory adjusted their method to allow for very aggressive knurling, thereby pushing the material further and increasing the overall diameter at both sides.  No machining or deburring was done on either side after this process to preserve this increased diameter.

Monday, November 14, 2016

Custom 3/8 X 9 Stainless Square U-bolts

Custom/special stainless steel 3/8 square U-bolts - engineered source inc is a supplier of custom square u bolts in stainless steel and steel zinc materials - covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, United States, and Mexico

We supplied these custom u-bolts at a quantity of 60 pieces with a lead time of approximately 1.5 weeks from order.  They are made using 304 stainless steel material with 2 inches of 3/8-16 thread on each leg.  Inside depth is 9 inches and the inside width is at 4 inches.

Thursday, November 10, 2016

Custom Metric Fine Thread Hex Cap Screw in A2 Stainless Steel

custom/special hex head cap screws, fine thread metric in A2 stainless steel - Engineered Source is a supplier and distributor of small quantity custom hex cap screws (metric and standard inch) in stainless steel material - covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, USA, and Mexico

This is a small quantity order of custom fine thread metric hex head cap screws in A2 stainless steel material we supplied to one of our OEM customers - we supplied a small batch of 100 pieces and the parts measured M8 X 1.0 X 30MM.  The hex cap screws were made fully threaded to the customer's specific instructions.  Lead time was 2-3 weeks from order.

Monday, November 7, 2016

Custom DFAR Compliant 6-32 X 5/16 Socket Head Cap Screw

Custom socket head cap screws in ASTM A-276 stainless steel material - Engineered Source is a supplier and distributor of custom and special to order stainless steel socket cap screws - covering Santa Ana, Orange County, Los Angeles, San Diego, Inland Empire, California, United States, and Mexico

This is a custom DFAR socket cap screw we supplied to our aerospace customer at just 55 pieces - it was made in the USA using ASTM A-276 stainless steel material to the customer's specific requirements.  Material certificates, dimensional test report, and certificate of conformance were provided with the parts.

Tuesday, November 1, 2016

Custom 1/2 X 19-1/16 Round Stainless Steel U-bolts

Custom 1/2 X 19-1/16 stainless steel round u-bolts - engineered source is a supplier and distributor of custom and special ubolts, both square and round, in stainless steel - covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, United States, and Mexico

We supplied a small quantity of this custom 1/2 diameter round u bolt to our customer as a one time order and shipment.  These u-bolts have approximately 3 inches of coarse thread on both legs and two 18-8 stainless steel nuts per customer's drawing specifications.  The width between the legs is 4-9/16" and the inside depth is measured at 7-13/16".  Material certs and inspection reports can be provided upon request.

Custom 3/4 X 6" 316 Stainless Steel Threaded Rod Studs

Custom 3/4 X 6" 316 Stainless Steel Threaded Studs - Engineered Source is a supplier and distributor of custom/special 316 stainless threaded rod and studs - covering Santa Ana, Orange County, Los Angeles, San Diego, Inland Empire, California, United States, and Mexico

These are custom 3/4 inch diameter coarse threaded studs supplied to our customer at a small quantity of 40 pieces.  The studs were cut and chamfered on both sides using 12 foot 316 stainless steel threaded rod.  Larger quantities of custom threaded studs can be supplied on a blanket purchase order basis.

Custom 5/16 X 7-1/2 Square Stainless Steel U-Bolt

Custom/special 5/16 coarse thread 304 stainless steel square U bolts - Engineered Source is a supplier and distributor of custom stainless steel square u-bolts - covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, USA, and Mexico

This is a custom square u-bolt we supplied to a customer at 200 pieces.  Parts were manufactured locally in Southern California using 304 stainless steel, with a 5/16 diameter and coarse threaded 2 inch sections on each leg of the u-bolt.  The inside width is 6-1/8 and the inside depth is at 7-1/2 inches.  Material certs were provided with the parts per customer's instructions.

Friday, October 28, 2016

Custom 5/8 X 33 Inch U Bolts In 304 Stainless Steel

custom special stainless steel ubolt supplier and distributor - serving santa ana, orange county, los angeles, inland empire, san diego, california, USA, and Mexico

These are large custom stainless u bolts we supplied to our customer with expediting processing - the inside depth on these parts is 33 inches, with the diameter and thread pitch at 5/8-11.  3.5 inches of thread was incorporated on each side and the inside width was 8-3/5 inches.  This was a small quantity order of just 6 pieces.

Monday, October 24, 2016

Special Phil Pan Machine Screws With Black Oxide Finish and Thread Locking Patch

Special Stainless Steel Phil Pan Machine Screw With Black Oxide & Nylon 11 Patch - Engineered Source is a supplier and distributor of special fasteners like these machine screws with black oxide finish and nylon thread locking patch services - serving Santa Ana, Orange County, Inland Empire, Los Angeles, San Diego, California, USA, and Mexico

We supply countless parts to our diverse customer base that incorporate one or more secondary services and finishes.  This stainless steel 4/40 X 3/16 phil pan machine screw is a good example.  It is made using 18-8 stainless steel and is then run through a Class 2 Black Oxide treatment.  The final step is a nylon 11 thread locking patch application.  We supply these specific machine screws to our customer on a revolving annual blanket purchase order basis.

Friday, October 21, 2016

Custom 6-Lobe Stainless Steel Socket Sheet Metal Screw

custom/special stainless steel sheet metal screws - Engineered Source is a supplier and distributor of custom and special stainless steel sheet metal screws - covering Santa Ana, Orange County, Los Angeles, San Diego, Inland Empire, California, United States, and Mexico

This is unique custom 302 stainless steel #4-24 X .900 socket sheet metal screw.  It incorporates a 6-lobe socket drive and a partial thread with a AB type point.  These special sheet metal screws are supplied at quantities of approximately 2,000 pieces per order and carry a lead time of 6-8 weeks.  They are passivated in the final stage of the manufacturing process and are made in the USA.

Custom 316 Stainless Steel Threaded Studs

Custom/special 316 stainless steel threaded rod studs supplier and distributor - Engineered Source covers Santa Ana, Orange County, Los Angeles, San Diego, Inland Empire, California, United States, and Mexico

This is another 5/8-11 threaded stud made using 316 stainless steel material, at 10" lengths.  Similar to the 6" version discussed in the previous entry these studs were also made with a 1 week lead time.  The quantity was higher however, at 150 pieces total at 10" lengths.  Higher quantities can be set up for annual or 6 month blanket purchase orders as well.

Custom 5/8 X 6 Threaded Studs in 316 Stainless Steel

Custom special 316 stainless steel threaded stud rods - Engineered Source is a supplier and distributor of custom/special 316 stainless steel threaded studs - covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, United States, and Mexico

We supply our customer base a large variety of custom made threaded rod studs made using 316 stainless steel.  This particular 5/8 X 6 threaded stud, with coarse thread, was supplied at a quantity of 100 pieces with a lead time of approximately 1 week.  The threaded studs are cut from 10 foot 316 stainless material and then chamfered on both ends for optimal use.

Wednesday, October 19, 2016

Custom Stainless Steel Shim Washers

Custom/special thin shim washers made using 304 stainless steel material - engineered source is a supplier and distributor of custom/special shim washers using steel and stainless steel material - covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, United States, and Mexico

This is one of the number of shim washers we carry, all of which are made domestically in the USA.  It's dimensions are 2.198 on the inside diameter, 2.647 on the outside diameter, and thickness of .060.  Tolerances on these custom stainless steel shim washer inside and outside dimensions is +/- .010 inches, and +/-.004 on the thickness.  All of the special shim washers we currently carry are supplied to our customers on a annual blanket purchase order basis.

Monday, October 17, 2016

Custom Square Low Carbon Steel Washer

custom special large square washer made to print using Q195 low carbon steel material - engineered source is a supplier and distributor of custom/special import extra large/thick washers - covering Santa Ana, Orange County, Los Angeles, San Diego, Inland Empire, California, United States, and Mexico

This is the third component of the thee piece assembly shown below that we supply our customer on a blanket purchase order basis.  It is manufactured overseas using Q195 low carbon steel material, with plain and light oil finish.  Approximately 1.96" across both directions, this square washer is .600" thick with a tolerance of +/- .06".

Friday, October 14, 2016

Custom Glass Bead Nylon Insert (Thin Pattern) Lock Nuts

Custom/special nylon insert lock nuts with glass bead finish - engineered source is a supplier and distributor of custom/special hex nylon insert lock nuts with glass bead finish - covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, United States, and Mexico

These special made thin pattern nylon insert lock nuts comprise three different sizes we sell to our long time customer on an annual blanket purchase order basis - the sizes covered are 1/4-28, 3/8-24, and 5/16-24.  The parts are made overseas with our long time trusted factory source and are put through a glass bead, aluminum oxide and oil treatment prior to further inspection and shipment to our customer.

Special Grade 8 Mold Bolt

Special/custom 3/4-10 Mold T-bolt made to print using grade 8 40CR material - engineered source is a supplier and distributor of custom/special mold grade 8 bolts - serving Orange County, Inland Empire, Los Angeles, San Diego, California, USA, and Mexico

This is a special 3/4-10 thread mold bolt made using Grade 8 40 CR material, with plain and light oil finish.  It is supplied in combination with the coupling nut and washer as shown below.  Sold on an annual blanket purchase order basis, this part is made overseas with our long time trusted factory source and is provided with all necessary paperwork/certs.

Thursday, October 13, 2016

Custom Grade 5 Coupling Nut

Custom/special 3/4-10 grade 5 coupling nut - engineered source is a supplier and distributor of custom/special coupling nuts in steel and stainless steel materials - covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, United States, and Mexico

This is a special Grade 5 coupling nut that is used together with a special mold bolt and square washer pictured below.  It measures 3/4-10 by 1-1/2 inches in length, and can be supplied with plain and light oil finish or hot dip galvanized finish as pictured here.  Together with the other two components, this coupling nut is supplied on a blanket as-released order basis.

Special Inconel Rolled Pin

custom/special rolled inconel alloy c-276 pins - engineered source is a supplier and distributor of custom/special inconel rolled, spring, and dowel pins - covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, USA, and Mexico

We supply a number of version of this special pin made using Inconel alloy C-276 material in the USA.  The part is stocked and released as needed to our long time customer.  The inconel materal is hot rolled, pickled, and annealed - the final pins shown here measure 1/16 X .850".

Tuesday, October 11, 2016

Special to Print Grade 5 Hex Head Cap Screw With Black Oxide Finish

Custom/special hex head cap screw in grade 5 steel black oxide material - Engineered Source is a supplier and distributor of custom/special grade 5 hex head cap screws with black oxide finish - covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, USA, and Mexico

We supply approximately 20,000 pieces of this custom grade 5 hex cap screw annually on an as-released basis to our long time customer.  The parts are made in the USA and measure 5/16-24 X 7/8.  With the black oxide finish typical lead time for parts like this hex cap screw is approximately 5-6 weeks from order.

Monday, October 10, 2016

Special 5/8-18 Nickel Plated Palnut For Aerospace Applications

Special Nickel Plated Palnut For Aerospace Application - Engineered Source is a supplier of special aerospace and mil-spec hardware/fasteners - covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, USA, and Mexico

This is a 5/8-18 palnut that we supply on a blanket purchase order basis to one of our aerospace customers.  Per their specific specifications we have the plain steel version of this part nickel plated to QQ-N-290, with copper strike.  Parts go through a 5 hour pre-bake process and also an 8 hour post-bake process at 375 degree Fahrenheit.  To our customer's request all passivated and plated parts are shipped with a NADCAP cert.

Custom Stainless Steel Square 5/16 X 6-1/2 U Bolts

Custom/special Square U Bolts in Type 304 stainless steel - Engineered Source is a supplier and distributor of custom/special square shaped U-bolts in stainless steel - covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, USA, and Mexico

This is another set of square u-bolts we supplied a customer in Los Angeles for a temporary set installation project.  Type 304 stainless steel material was used and 5/16 diameter coarse thread was applied at 2 inches on the feet.  Inside diameter for these u-bolts is 6-1/2 inches.

Special NAS9921C5B20F & NAS9921C5B19F Shear Bolts

Custom/special NAS 9921 shear bolt fasteners - Engineered Source is a supplier and distributor of custom/special aerospace and mil-spec fasteners like this NAS9921 shear bolts - covering Orange County, Los Angeles, San Diego, California, USA, and Mexico

As you can see in the print below, which continues for another 4 pages of specifications, these shear bolts are a tough part to make.  5/16-24 thread pitch is used for the threaded section, with a thread locking patch.  A286 material is used to make the part, with heat treat and passivation per AMS 2700.  We supplied the customer 6 pieces of each part, made specifically for their order and specifications.

Thursday, October 6, 2016

Custom 5/16 X 7-1/2 Square U Bolt In 304 Stainless Steel

custom/special square u bolts in 304 stainless steel - engineered source is a supplier and distributor of custom stainless steel square u-bolts - covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, USA, and Mexico

This is a square U bolt in 304 stainless steel that we supplied to a customer at just 32 pieces.  The 2 inches of thread on either side are 5/16-18 coarse thread and the inside depth of the part is 7-1/2 inches, while the inside diameter is at 6-1/16 inches.  Also a rush project, these parts were completed within 3 days as well from order.

Custom 5/16 Diameter 304 Stainless Steel U-bolt

Special custom 5/16 diameter u-bolt in stainless steel - engineered source is a supplier and distributor of custom u-bolts in stainless steel - covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, United States, and Mexico

Custom U bolts are a daily routine for us and this is a 5/16-18 threaded U bolt we supplied a customer, made in the USA using 304 stainless steel material with plain finish.  It measures 4-5/16 inches on the inside width and 5-1/2 inches on the inside depth.  The customer was in a big rush and we were able to get the parts made and shipped within 3 days from order.  Material certs were provided as well per our customer's request.

Tuesday, October 4, 2016

Custom Metric Button Socket Cap Screw In 302 Stainless Steel

Custom/special metric button head cap screws in 302 stainless steel - engineered source is a supplier and distributor of custom/special metric button head socket cap screws in stainless steel material - covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, United States, and Mexico

This is a special to print custom button head cap screw we supply a long time customer on an annual basis at approximately 5,000 pieces - it measures M3 X 0.5 X 7.24MM.  They are supplied in increments of 5,000 pieces and are made in the United States using 302 stainless steel material with passivation as the final stage in the process.  Fine thread and a special to print point is incorporated in these parts, which resembles an oval point on a standard set screw.

Special Made DIN912 M12 X 1.5 X 70MM Socket Cap Screw

Special/custom made DIN912 M12 X 1.5 X 70MM socket cap screw in 12.9 alloy steel - engineered source is a supplier and distributor of custom made metric socket cap screws in alloy material - covering Santa Ana, Orange County, Los Angeles, San Diego, Inland Empire, California, United States, and Mexico

We supply countless metric fasteners to our customer base and often due to availability or additional customer specific requirements we have a number of alloy socket cap screws special made to order.  This DIN912 M12 X 1.5 X 70MM is a perfect example.  We provide this socket screw to our customer on an as-released blanket purchase order basis and typically stock a 6 month supply at any one time.  It is made in the USA in 12.9 alloy steel material with plain and light oil finish.

Custom 1/72 Hex Machine Screw Nut Made to Print

special/custom 1/72 hex machine hex nut made to print using 303 stainless steel - engineered source is a supplier and distributor of custom stainless steel hex machine screw hex nuts - covering Santa Ana, Orange County, Los Angeles, San Diego, California, United States, Mexico

This is a special to print part we sell to an aerospace customer on an as-released purchase order basis, with the releases at approximately 600 pieces.  Made in the USA, this 1/72 machine screw nut is DFAR compliant and was made using 303 stainless steel with 3B thread fit.  Typically lead time from order is approximately 4 weeks.

Special Dimensional MS16218-9 Slotted Flat Machine Screw

special/custom dimensional MS16218-9 slotted flat machine screw in c65500 silicon bronze material - engineered source is a supplier and distributor of custom/special silicon bronze milspec machine screws - covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, United States, Mexico

Customers often ask us to supply them dimensional equivalents of MS and AN milspec parts with a varying degree of documentation and testing requirements.  This is a small quantity (1,000 pieces) batch of special made dimensional equivalent of MS16218-9 slotted flat machine screws, made in the USA using C65500 ASTM B 98 silicon bronze material - it measures 2-56 X 3/16".

Tuesday, September 27, 2016

Special Threaded Studs in 316 Stainless Steel


Special threaded rod products like these custom cut 3/4 X 9 threaded studs in 316 stainless steel are a daily routine for us.  We supply our diverse customer base a large variety of custom made u bolts, custom made square u bolts, bent threaded anchor bolts, etc.  A number of different raw material choices are at your disposal and countless more specialized materials available upon request at slightly longer lead times.

Friday, September 16, 2016

Custom Molded Glass Filled Nylon T-Pin

Special/custom molded glass filled nylon plastic t-pin fastener/hardware - Engineered Source is a supplier of special and custom molded plastic components - covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, United States, and Mexico

We supply our diverse customer base a variety of special molded and injection molded parts like this custom nylon molded part that we supply in quantities of 2,000-5,000 pieces, on a annual blanket order basis.  This specific molded part is made using Nylon 6/6 material that is 33% glass filled to allow for optimal break points our customer requires.

Thursday, September 1, 2016

AN126288 Straight Stud Special Made for Aerospace Application

Special AN126288 straight threaded stud in Steel AMS 6322 material with AMS 2400 Cadmium plating, heat treated to HRC 26-32 - Engineered Source is a supplier and distributor of special/custom aerospace parts/hardware - covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, United States, and Mexico

This is a dual threaded straight stud made to AN126288 specifications, with one side at 5/16-24 thread pitch and the other at 5/16-18 non standard pitch.  We supplied this part to our aerospace customer at approximately 300 pieces per order.  AMS 6322 steel was used as the material, heat treated to 26-32 rockwell hardness and Cadmium plated to AMS 2400 specification.  Material, heat treat, and plating certs were provided with the parts.

Monday, August 29, 2016

Custom 302 Stainless Steel Narrow Washer

Custom/special stainless steel flat washer (narrow) - Engineered Source is a supplier and distributor of special and custom flat washers - covering Santa Ana, Orange County, Los Angeles, Inland Empire, California, United States

This washer is a very similar part to the other narrow 304 stainless steel flat washer posted some days ago.  It is made in the USA using 302 stainless steel in quantities of 1,000-1,500 pieces at a time and carries an approximate 4 week lead time.  The dimensions are as follows: ID of .7180, OD of .9680, and Thickness of .0630.

Friday, August 26, 2016

Special Grade 5 Hex Head Shoulder Bolt

Special custom grade 5 hex head shoulder bolt - Engineered Source is a supplier and distributor of custom and special shoulder bolts - covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, United States, Mexico

This is a special grade 5 hex head shoulder bolt made in the USA and finished with commercial zinc with bake and clear chromate sealant.  The bolt measures 5/16-18 X 1-1/4 and is supplier on an annual blanket order basis to our US based customer.

Special Flat Washer in 304 Series Stainless Steel

Custom/special flat 300 stainless steel flat washer - Engineered Source is a supplier and distributor of special/custom flat washers in stainless steel material - covering Santa Ana, Orange County, Los Angeles, Inland Empire, California, United States, and Mexico

We supply our diverse customer base countless special made flat washers, mostly on blanket as-released purchase order basis.  This is a custom 304 stainless steel flat washer made in the USA to an inside diameter of .600, outside diameter of .872, and thickness of .047 inches.

Thursday, August 25, 2016

Special Phillips/Slotted Hex Washer Head Machine Screw

Custom/special phillips slotted hex washer head machine screw in steel with black oxide finish - Engineered Source is a supplier and distributor of custom and special combo drive machine screws - covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, United States, Mexico

This is a part we supply our long time customer on an as-needed basis every two years or so at approximately 40,000 pieces per order.  It is a M4-0.70 X 9.5MM phillips slotted combo drive hex washer head machine screw made using steel material with black oxide and light oil per customer specifications.  Made in the USA this part typically carries a 5-6 week lead time from order.

Wednesday, August 17, 2016

Special U-Bolts In Stainless Steel Material

Custom/Special U-Bolts in stainless steel at 3/8-16 diameter - Engineered Source is a supplier and distributor of custom/special U bolts in steel and stainless steel covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, United States, Mexico

We have been supplying a diverse range of custom U-bolts to the construction, plumbing, and HVAC industry for over 20 years.  This is a custom 3/8 diameter 304 stainless steel U-bolt at 6-3/4 inch inside width, 7-7/8 inch depth and approximately 2-1/2 inches of coarse thread.  Lead time for parts like this varies based on material, size, and quantity but is typically between 3-5 days from order.

Friday, August 12, 2016

Special Thread Cutting Screw With Type 17 Point

custom special combo drive thread cutting type 17 screw in stainless steel - engineered source is a supplier and distributor of custom/special thread cutting screws - serving Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, United States, Mexico

Custom thread rolling and thread cutting screws are the most common types of special parts we supply - this is a custom #10-12 X 1" phillips square combo drive thread cutting screw made in the USA using 302 stainless steel.  A type 17 point is incorporated to our customer's specifications and the parts are run through a black oxide and wax service as a final step.  These parts are stocked and releases on a blanket purchase order basis annually.

Thursday, July 21, 2016

Special Concrete Anchors In Steel/Zinc

Special/custom J anchor bolts in A307 steel with zinc plating - Engineered Source Inc is a supplier and distributor of custom/special concrete anchors and concrete bolts like this J-bolt in steel and stainless steel - covering Santa Ana, Orange County, Inland Empire, San Diego, Los Angeles, Southern California, United States, Mexico

We a are a long time supplier of special anchors to the construction and OEM sectors in just about every material imaginable.  This is a fairly simple J-bolt anchor made using A307 steel with zinc plating.  It measures 3/8-16 by 12 inches and was manufactured domestically in the USA.  Like most custom fasteners, special anchor parts like this can be supplied on a blanket as-released purchase order basis.

Thursday, July 14, 2016

Special Indented Hex Washer Head Thread Forming Screw

Special/custom indented hex washer head trilobular taptite thread forming screws in 18-8 stainless steel - engineered source is a supplier and distributor of special thread forming stainless taptite trilobular screws - covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, United States, and Mexico

Engineered Source supplies a large number of special thread forming screws like this #10-32 X 3.72" unslotted indented hex washer head trilobular screw.  This specific part has been supplied to the same customer for over five years and is sold on a blanket purchase order basis.  It is manufactured in Taiwan using 18-8 stainless steel, passivated and waxed to our customer's specifications.

Friday, July 8, 2016

Special Socket Shoulder Screw In 303 Stainless Steel

Special/custom socket shoulder screw in 303 stainless steel with 8-32 thread for an electronics manufacturer - Engineered Source is a supplier and distributor of electronics hardware like this special/custom socket shoulder bolt in 303 stainless steel - covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, United States, Mexico

Engineered Source is a long time supplier for a number of electronics manufacturers and over the years the number of custom and standard shoulder screws carried has grown exponentially.  This is a special 3/16 X 1-1/2 socket shoulder screw in 303 stainless steel with 8/32 thread sourced from an overseas factory we have worked with for almost a decade.

Tuesday, June 28, 2016

Special Male/Female Flush Mounting Hardware

Special/custom male female flush mount stamped hardware in steel zinc material - engineered source is a supplier of special and custom stamped mounting hardware - covering Santa Ana, Orange County, Los Angeles, Inland Empire, San Diego, California, United States, Mexico

Engineered Source supplies countless special stamped parts, from a number of different custom stamped washers to specialized stamped hardware items like these paired male and female flush mounting hardware parts.  They are stamped at a domestic US based factory that we have been working with for over 10 years and supplied on an as-needed blanket purchase order basis.