Search Our Custom Fasteners

Friday, January 13, 2023

Custom 440C Precision Machined Shaft Bushings

 

Custom 440C Precision Machined Shaft Bushings
We had these custom 440C precision machined shaft bushings manufactured using DFARS compliant AMS 5830 material for our aerospace customer, with a passivated finish to ASTM A967.  The inside diameter on the bushings was set to .6255 +/- .0005" and outside diameter to .7528 +/-.0005", with a width of .185 +/-.002".  Full certs were provided with the parts, including a FAIR and NADCAP certified certs for all secondary processes involved in manufacturing the parts complete to print.

Friday, December 9, 2022

Custom Automotive 12-Point Flange Bolts With Zinc Flake Finish

 

Custom Automotive 12-Point Flange Bolt With Zinc Flake Finish Manufacturers
We had these custom automotive 12-point flange bolts manufactured in grade 8 material (4140 alloy steel) with both low head and high head options.  1/2-13 2A thread was rolled on both version slightly undersized to allow for coating thickness of the Geomet zinc flake + top coat and black sealant.  Prior versions of the bolts our automotive customer used were experiencing failures from the hydrogen embrittlement resulting from the use of black zinc electroplating - black Geomet zinc flake coating was used to eliminate this risk and increase corrosion resistance at the same time.

Monday, November 28, 2022

Custom Stainless Steel Socket Shoulder Bolts

 

Custom Stainless Steel Socket Shoulder Bolt Manufacturers
These custom stainless steel socket shoulder bolts were manufactured using 18-8 stainless steel material with factory passivation finish.  The head was fully cold formed, which took multiple tooling iterations to get just right.  1/4-20 2A thread was rolled at a length of .575" underneath the .305-.311" diameter shoulder.  A .190" across the flats hex socket drive was incorporated at a depth of .120" min.  Certs were made available to our customer's specifications.

Wednesday, November 16, 2022

Custom Stainless Steel Step Down Precision Pins

 

Custom Stainless Steel Step Down Precision Pin Manufacturers
We provided these custom stainless steel step down precision pins to our utilities customer.  It took a few iterations of the design and specifications to dial in the drawing and we then produced these parts using 18-8 stainless steel material with plain finish.  Prior to our production our customer was manually assembling this part using the 3 individual components and we eliminated that cumbersome process by providing a single fully machined version.

Custom Airframe Double Thread 17-4PH Precision Pins

Custom Airframe Double Thread 17-4PH Precision Pins Manufacturers

 We had 4 different size variations of these custom airframe double thread 17-4PH precision pins manufactured for our aerospace and defense customer, with all production done domestically in the USA and the raw material DFARS compliant.  A combination of M6 X 1.0 and 10-32 UNJF rolled thread was required for each variation.  Lead time was the biggest challenge on these parts due to the rolled thread requirement and heat treat process but we managed to have all 4 parts completed within the requested timeframe.  Full certs were provided with the parts including a FAIR.

Monday, November 14, 2022

Custom Tamperproof NAS1352 Socket Head Pin-in Screws

 

Custom Tamperproof NAS1352 Socket Head Pin-in Screws
Our aerospace customer needed NAS1352N04-06 socket head screws for their assembly but with a tamperproof pin-in socket head, which is not readily available off the shelf.  We had the pictured custom tamperproof version of this NAS1352 screw manufactured domestically to fully comply with the NAS specification using DFARS compliant material, with of-course the exception of the drive type.  Parts measured 4-40 X .375" and full certs were provided with the parts.

Monday, September 26, 2022

Custom DFARS A286 Aerospace NAS Socket Head Bolts

 

Custom DFARS A286 Aerospace NAS Socket Head Bolt Manufacturers
These custom DFARS compliant NAS1352N4LE16S socket head bolts were manufactured domestically for our aerospace customer using A286 stainless steel material from France.  They measured 1/4-20 X 1" and were finished with AMS2411 Rev J silver flash plating and bake, as well as thread locking patch.  Certification with mechanical testing performed per FF-S-86 specification were absolutely critical on these parts and were included together with material certs, passivation certs, and plating certs.

Friday, September 23, 2022

Custom Metric Stainless Hex Male-Female Standoffs

Custom Metric Stainless Hex Male-Female Standoffs Manufacturers

 These custom metric stainless steel male/female hex standoffs were manufactured using 304 stainless steel material at 8MM across the flats on the hex.  M5-0.8 thread (6g thread fit) was incorporated on the male end at a length of 13MM and on the female side at an engagement depth of 12.7MM.  Parts were provided with factory passivation and material certs.  

Wednesday, September 14, 2022

Custom A286 Stainless Steel Castle Nuts

 

Custom A286 Stainless Steel Castle Nut Manufacturers
These are DFARS compliant custom A286 stainless steel castle nuts manufactured domestically in the USA for our aerospace customer.  They incorporate 7/16-26 2A thread and internal diameter of .328 +/- .005".  The cross slots measure .090 +/-.005" and unthreaded shoulders both measuring .394"+0.000/-.004 in diameter by .063" +/-.01.  Full certs including a FAIR are required as a part of the deliverable package.

Custom 316 Stainless Round Head Shoulder Wood Screws

 

Custom 316 Stainless Round Head Shoulder Wood Screws
These custom round head shoulder wood screws were manufactured at 10,000 pieces using 316 stainless steel material with plain finish.  The head/shoulder combination was cold headed and the thread rolled.  Shoulder dimensions were 3.8-4.0mm diameter by 5.5mm minimum in length, with the rolled thread at 15.88mm min usable thread.  It's round head was specified to 7.5mm-8.0mm diameter and 2.75mm-3.05mm height.  Material certs were supplied with the parts.