These custom precision machined washers were manufactured for our electronics customer using 6061-T651 aluminum material with a flash hard anodize finish. The ID was set to 1.015-1.005" and OD at 1.625". One of the corners required a R.062 machined radius and the washer thickness had to be between .125" and .135". Full certs were provided with the parts.
We supplied these custom socket drive partially threaded studs to our electronics customer in 316 stainless steel material with plain finish. A cold formed socket 3MM hex drive was incorporated on the threaded side and M6-1.0 thread was rolled to a length of 26MM. The unthreaded side measures 19MM in length and 4MM in diameter with slightly chamfered corners.
These custom black injection molded parts were manufactured using recycled ABS material in black for our specialty OEM customer. They were manually cutting sections of long rods on the production floor prior to our supply of the custom sized part to save time and overall cost for the application. Dimensionally the parts measured .25" at square cross section and .50" in overall length, with slightly rounded edges.
