Custom Metric Stainless Steel Knurled Thumb Screws

 

These custom metric knurled thumb screws were manufactured for our aerospace customer using A2 stainless steel material with matte black oxide finish.  Approximately 5MM of male M3 X 0.5 thread was rolled on these parts and the shoulder measured 6MM in diameter by 5MM in length.  Aggressive straight knurl was applied to the parts at 0.8 PH.  Full certs were provided with the parts.

Custom Stainless & Brass Precision Ball Studs

 

These custom precision machined ball studs were manufactured for our gun manufacturing customer using 303 stainless steel material and brass material.  Male thread on both material options was rolled at #10-40 in variety of lengths per customer's requirements and the internal thread on the ball was set to #12-40.  Overall length of the part ranges from 13.5MM to 16.5MM.  Full certs were available with the parts.

Custom Long Socket Set Screws in Stainless Steel

 

These custom long cup point set screws were manufactured for our aerospace customer using 304 stainless steel material with a cold formed hex socket drive and rolled 1/4-20 or #10-24 thread.  The lengths vary from 3 to 4 inches and only commercial passivation was needed to complete the parts.

Custom Grade 5 Zinc Plated Solid Spacers

 

These custom solid spacers were manufactured for our electronics OEM customer using mild carbon steel material with zinc clear finish.  The inside diameter was set to .328" and the outside diameter of the spacers were machined to 1.00".  Full certs were provided with the parts per customer requirements.