Custom 3/8-16 X 5" Round U-Bolts in 316 Stainless Steel Material

This is one of many custom round shaped u-bolts we supply in 316 stainless steel material.  The 3/8-16 threaded sections measure 1-3/4 inches on each leg and the inside width is 2-5/8 inches.  Inside depth is measured at 5 inches.  We typically supply these stainless ubolts at quantities of 100 pieces.

Custom #12 Combo Slotted/Phillips Type B Pan Head Sheet Metal Screws

We supply these custom type B sheet metal screws to a long time customer on an as-needed blanket purchase order basis.  It is a #12-11 sheet metal screw at 1-1/4 inches in length with a leader point incorporated per customer specifications.  Low carbon steel, case hardened, is used with a commercial zinc and clear chromate finish.  This custom screw is made in the USA with a lead time of 4-6 weeks.  Internal part number BCPLP-1220-B.

Custom 12.9 Alloy Metric Socket Head Cap Screws

This is a custom M8-1.25M X 24MM socket head cap screw made to print using 12.9 alloy steel with thermal black oxide finish.  4037 alloy steel was used to made these parts in the USA, heat treated to 39-45 HRC.  We supply this part on an annual revolving purchase order basis to a long time customer.  Our internal part number is CLMP8-SC.

Custom 316 Stainless Steel Threaded Weld Studs

We supply our customer base a large array of custom made to print weld studs like this 316 stainless steel reduced base weld stud.  It measures 3/4-10 X 2-1/4 and is sold to our customer on an annual as-released blanket purchase order basis.  Our internal part number is CJL-075036-J.

Custom 1/4-20 Fully Threaded Studs In Brass Material

These are custom cut and chamfered 1/4-20 threaded studs in brass material that we supply to our long time customer at small 50-100 pieces quantities.  Lead time is typically 1 to 2 weeks depending on the situation, which can be significantly improved with a rush charge if necessary.  Our internal part number is FTS-014048-O.

Custom 1/2-13 X 8-1/2 Low Head Stainless Steel Socket Head Cap Screw

This is a custom low profile socket head cap screw we supplied to a customer at just 10 pieces, made in the USA using 303 stainless steel material.  It is a coarse thread 1/2-13 part at 8-1/2 inches in length.  The threaded portion of the screw is at approximately 3 inches in length.  Material certs are available upon request.  Our internal part number is SCS-050136-I.

Custom ASTM-A684 High Carbon Wave Spring Washer

We supply a number of carbon steel 3-wave spring washers like this ASTM-A684 spring washer we provide a customer on an annual blanket purchase order basis.  This washer measures approximately 1.658 on the inside diameter, 2.132 on the outside diameter, and a thickness of approximately .148 inches.

Custom 1/2 X 7" Round A36 Galvanized Steel U-Bolts

These custom made u-bolts were manufactured on a rush basis for a customer in dire need, completed within approximately 1 week from order.  A36 steel material was used with hot dip galvanized finish per customer's instructions.  3 inches of coarse thread were incorporated at each leg, with the inside depth at 7" and inside width at 5".

Custom DIN 7991 M14 X 50MM Flat Socket Cap Screw In Class 10.9 Alloy Steel

We supply our customer base countless custom made metric socket screws like this special to print M14 X 1.5M X 50MM flat socket cap screw in 10.9 alloy steel, with plain and light oil finish.  This custom socket screw is supplied in small quantities from 10-50 pieces at a time and is often used in automotive and motorcycle applications.

Custom 18-8 Stainless Steel Washer

This is one of the countless custom to print stainless steel washers we supply on a revolving blanket purchase order basis - it is a domestic made 18-8 stainless steel flat washer measuring .170 X .500 X .030.  Tolerances on the OD are +/-.0050 and the ID is maintained within .170-.177 per the customer specific requirements.  The thickness on the washer ranges between .030 and .040 inches.