Special Washer To Print With Glass Bead Aluminum Oxide Finish

This is one of a number of glass bead finished fastener parts we supply to our long time customer, made using low carbon steel to the following dimensions: .400 inside dimension, .750 outside dimension, and .060 thickness.  The part is manufactured in the United States and sold on a blanket  as-released purchase order basis.  We typically have on hand 6-12 month supply of the part at any one time.

Special Belleville Washer In SAE 1060 Spring Steel

Special washers are a staple category at Engineered Source and we supply our customer base with a wide range of types, sizes, and materials.  This is a special belleville washer made in the United States using SAE 1060 spring steel material and heat treated to 42-48 HRC.  It measures .475 on the inside dimension, .848 on the outside dimension, and .060 in thickness.  20 degree offset angle is used per customer's print specifications.

Special 6/32 X .393 +/-.020 Socket Shoulder Screw in SAE Grade 2 Steel, Black Phos & Nylon Patch

This is a special socket shoulder screw manufactured in the United States using SAE grade 2 steel material with black phosphate finish.  A nylon patch process is run on the parts to finalize them for use in our customer's application.  We carry these parts on a blanket purchase order basis and typically stock 6-12 month supply for our customer's immediate production needs.

Special 5/16-18 X 1-1/4 Hex Shoulder Bolt In Grade 5 Steel

We have been supplying this special hex shoulder bolt to the same customer for over five years, made in the USA using grade 5 steel and zinc plated.  Approximately 12 months of supply is carried at all times and parts are released to our customer as needed based on their production.  Blanket purchases are used on a rotating basis to lock in pricing and ensure adequate supply at all times.

Special 3 Wave Spring Washer

This is a special 3 wave steel spring washer that we have been supplying our customer for a number of years.  We stock an approximately 12-18 month supply of the part and release it throughout the year based on our customer's usage.  We can supply custom spring washers in a countless array of materials, sizes, and dimensional parameters.

Special 6-32 X 3-1/2 Slotted Round Machine Screw in Plain 1022 Carbon Steel

We supply this part to our aerospace/defense customer after having it cadmium or zinc plated, typically at quantities between 1,000 and 3,000 pieces.  This part is made in the USA and is provided with full certs, including DFAR, material, FAIR, and Certificates of Conformance.  Lead time is typically 6-8 weeks from order and if needed an updated drawing can be provided for final approval prior to production start.

Special SAE 863 Bronze Sleeve Bearing

We provide our customer base a number of different bearings and sleeve type bearings like this SAE 863 part.  This part was supplied at a quantity of just over 5,000 pieces and the lead time was approximately 6 weeks.  SAE 863 is a powdered Iron-Copper material that boasts greater strength due to its iron content.

Special Vented 8-32 X 5/8 Socket Head Cap Screw in Invar 36 Material

This part is very much like the 6-32 X 1/4 vented socket cap screw shown in an earlier blog and this special invar part was also purchased by a university student at a relatively small quantity.  In quantities of 20-100 pieces the lead time for special socket cap screws with these parameters is approximately 1-2 weeks, with rush service available upon request.

Chrome Plated 316 Stainless Steel 6-18 X 3/4 Phillips Flat Sheet Metal Screw

Engineered Source offers a variety of secondary services for both standard and special fasteners, with additional detail available at http://www.engineeredsource.com/customized-special-fastener-supplier-orange-county-ca-s/108.htm.  Chrome plating is typically done either in barrel form for larger quantities or by individually hanging the fasteners, which is significantly more expensive.  For parts that serve a critical aesthetic function, like screws on musical instruments, individual plating is preferred to limit the imperfections.  Barrel based chrome plating however is typically the ideal scenario for applications where cost and corrosion resistance are relatively more important than the aesthetics of the parts.  These chrome plated 316 stainless steel (easy to distinguish with the stamped dot at the flat head to designate the 316) sheet metal screws were barrel plated at approximately 30,000 pieces.  We stock these parts for our customer on a blanket purchase basis and release as needed throughout the year.

Special Machined Coupling Nut Made to Print In Aluminum Material

This is a special 6535AX coupling nut made for our aerospace customer to print using aluminum material.  Physical and chemical material certs are provided with the parts and they are produced domestically within the United States.  We stock this recurring part for our customer and release the parts as needed throughout the year.