Custom square galvanized u-bolts made using C1018 steel material

These are custom square galvanized u-bolts we supplied to our customer in Brockport NY at 100 pieces.  They were made using C1018 steel material with hot dip galvanized finish.  1/4 coarse thread was incorporated at 1/2" length on each leg.  Inside width was at 2 inches and inside depth was at 2-1/4 inches.

Custom Stainless Button Head Cap Screws - Partially Threaded

These are custom stainless button head cap screws with partial 8-32 thread made domestically in the United States to the customer's print.  303 stainless steel material was used and the unthreaded shank of the custom screw was made to a diameter of .125".  The 8-32 threaded portion was maintained to a max .225 inches in length.  The button head diameter was maintained within a maximum of .312 inches.

Custom Socket Head Screws With A Drilled Point

These are custom socket head screws with a low profile head measuring .270 X .078 inches, made in the USA using 303 stainless steel material.  The thread incorporated is 8-32 at 7/8" in length, with the remainder of the length as an un-threaded shoulder.  The point on these custom socket bolts has a machined socket drive matching the hex drive on the low profile head.  These unique custom screws were produced in under one week for our customer's urgent needs.

Custom Machined Flat Head Screws In 303 Stainless Steel

These are custom machined flat head screws made domestically in the USA using 303 stainless steel material.  The unique application required the custom screw to have a stop shoulder machined and a 30 degree angle under the head.  10-24 thread was used for the threaded area and the head diameter was maintained at .312" +/-.005.  We supplied just 10 pieces of these custom machined screws for prototype purposes before our customer commits to a larger quantity.