Custom Low Head Slotted Machine Screws - 8-32 X .375" In 12L14 Steel

These custom low head slotted machine screws were manufactured domestically using 12L14 steel material and then run through a commercial black oxide process.  Length under the head was set at .375" +/-.03", fully threaded with 8-32 thread pitch.  The head height was set at .055", diameter at .265", slot width at .05", and slot depth at .042".  Our internal part number for this item is MSF-0806-AF and while lead time varies quite a bit depending on production volume required, we typically budget 6-8 weeks from order confirmation.

Custom Cross Drilled Thumb Screws - M10-1.25 X 25MM-30MM

These sweet custom cross drilled thumb screws were produced domestically using low carbon steel material with plain finish.  Two different sizes were produced: M10-1.25 X 25MM and M10-1.25 X 30MM.  The head on both sizes measured 15MM in diameter and in height.  The cross drilled holes have a diameter of 6MM with a slight chamfer at each opening.  Typically a thumb screw like this would have knurling around the head but our customer decided to forgo that feature.

Custom Slotted Machine Screws For An Architectural Application

These custom slotted machine screws were made at a smaller 150 piece quantity for our architectural design customer.  They were made domestically using 18-8 stainless steel material with a relatively fast turnaround time of 2 weeks from order.  We replicated a sample part provided by our customer in the absence of a drawing.  1/4-20 thread pitch was incorporated with the thread length at 1-1/2 inches.  Our internal part number for this part is STS-1524-I.

Custom Slotted Reverse Drive Machine Screws - 1/4-20 X 1" In Zinc Plated Steel Material

These are custom slotted reverse drive machine screws made domestically in the USA using low carbon steel material with commercial zinc and clear finish.  Approximately 12,000 pcs were produced with a lead time of 8-10 weeks.  The heads were cold headed and the slotting was done as the last stage in the process prior to zinc plating.  Material certs and certificate of conformance was made available to the customer as needed.

Custom Combo Drive Machine Screws - 10-32 X 3/8 Phil/Slot Pan Head M/S In Steel Zinc

These are custom combo drive machine screws measuring 10-32 X 3/8.  They are manufactured domestically using steel zinc material with production runs typically at 200,000 to 250,000.  We stock and release this part to our long time OEM customer with revolving annual blanket purchase orders.

Custom Knurled Shoulder Machine Screws Made To Print - 1/4-20 X 1-1/4 Round Head In Grade 5.1 Zinc Yellow

These are custom knurled shoulder machine screws manufactured domestically in the USA in grade 5.1 steel material with zinc and yellow finish.  Production was run at a relatively small quantity of 4,000 pieces, which was split into two shipments approximately 4 months apart to our OEM customer.  Material certs and dimensional test reports were provided to our customer with the parts, as well as the standard certificate of conformance.  Our internal part number is M111957-2.

Custom Phil Flat Machine Screws To Print - 1/4-28 X 13/16 In Steel With Black Oxide Finish

These custom phil flat machine screws are made domestically in the United States using low carbon steel material with black oxide finish and light oil.  We supply them on revolving 12 month blanket purchase orders with other custom hardware items the same customer purchases from us.  Initial lead time for custom machine screws like these is 5-6 weeks from order and drawing approval.

Custom Socket Head Screws With A Drilled Point

These are custom socket head screws with a low profile head measuring .270 X .078 inches, made in the USA using 303 stainless steel material.  The thread incorporated is 8-32 at 7/8" in length, with the remainder of the length as an un-threaded shoulder.  The point on these custom socket bolts has a machined socket drive matching the hex drive on the low profile head.  These unique custom screws were produced in under one week for our customer's urgent needs.

Custom Machined Flat Head Screws In 303 Stainless Steel

These are custom machined flat head screws made domestically in the USA using 303 stainless steel material.  The unique application required the custom screw to have a stop shoulder machined and a 30 degree angle under the head.  10-24 thread was used for the threaded area and the head diameter was maintained at .312" +/-.005.  We supplied just 10 pieces of these custom machined screws for prototype purposes before our customer commits to a larger quantity.

Special to Print Undercut Flat Head Machine Screw in 4037 Steel

This is a special 1/4-28 X .571 dime slotted undercut flat head machine screw manufactured by a US based manufacturer we have worked closely with for more than two decades, made using 4037 steel and further processed with glass bead and rust inhibitor for optimal performance in our customer's application.  Parts like this typically carry a lead time of 6-10 weeks, depending on the secondary services involved and the quantity required.