Custom Grade 8 U Bolts With Rolled Thread - 1/2-13 X 8-1/2" Round U-Bolt in 4140 SAE Grade 8 Material

These are custom grade 8 u bolts made using 4140 SAE grade 8 steel material with rolled 1/2-13 thread.  The hardness was recorded at 36 HRC and tensile strength at 162 KSI.  5 pieces were made for our customer for testing purposes prior to a larger commitment.  The inside width was set at 4.76", inside length at 8.5", and approximately 1.75" of rolled thread was incorporated on both legs.  Material and heat treat certs were provided with the parts per our customer's request.

Custom Socket Shoulder Screws With Thread Locking Nylon Patch - 6-32 X .393" In Grade 2 Material With Phos Finish

These are custom socket shoulder screws made using grade 2 steel material with phos finish and a thread locking patch.  Measuring 6-32 X .393" with a shoulder at .080" and head height at .125" this custom socket shoulder screw is manufactured overseas in increments of 100,000 pieces to be released to our long time customer on an as-needed blanket purchase order basis.  Initial lead time for the first release is typically 120-150 days from order confirmation.  When needed, we can provide a print with dimensions and tolerances for the customer to approve prior to production start.

Rush Order Custom Square U Bolts - 3/8 X 9" In 304 Stainless Steel Material

These are rush order custom square u bolts made domestically using 304 stainless steel material.  We had 50 pieces manufactured for our customer at just 3 days production time to be shipped next day air directly to the job site.  Material certs and a certificate of conformance was provided per our customer's specific instruction.  The inside width was set at 4 inches, inside depth at 9 inches, with approximately 2 inches of 3/8 coarse thread on each leg.

Specialty Round 316 Stainless Steel U Bolts - 1/2-13 X 7-1/4 With 316 Stainless Steel Hex Nuts

These are custom specialty round 316 stainless steel u bolts supplied to our long time customer.   They were manufactured domestically to the customer's drawing in plain 316 stainless steel material, with a lead time of 5 days.  Material certs and a certificate of conformance was provided with the parts per the customer's request.  The inside width is 4-9/16" while the inside length is maintained at 7-1/4".  Approximately 3 inches of 1/2-13 thread was incorporated on each leg.