Custom Double Thread Type 17 Wood Screws

 

These custom double thread screws were a custom variation of hanger bolt for our construction customer - they were manufactured using 304 stainless steel material and combines an M6-1.0 machine screw thread that includes a 3MM hex socket drive with oversize type 17 point wood screw thread.  A needle sharp point was a prominent and critical feature accomplished with fine tuned point angle.  The parts were provided with factory passivated finish.

Custom Molded HDPE Threaded Spacers

 

These custom molded spacers were manufactured for our construction equipment manufacturing customer using steel zinc threaded inserts with overmolded HDPE spacers in variety of shapes and sizes.  The internal thread was set to 1/4-20 coarse thread and the molded spacers were made using injection molded HDPE material with plain finish.  The spacers ranged from 17.6MM in diameter to 40MM in diameter.

Custom Low Head Socket Screws

 

These custom low head socket screws were manufactured for our customer using 304 stainless steel material with glass bead finish to accomplish this grey color appearance.  The parts were finished with anti-seize patch application to keep the parts from seizing in our customer's application, which was experienced without the patch applied.  Partial 1/4-20 thread was rolled on these parts and the head measured 17mm in diameter by 2.2mm in height, with a 4mm recessed hex socket drive.  Full certs were provide with the parts.